Project s14 sr to rb26

[silviaNC]

I figured after working on my car for a year I could post and see what you guys think.
I picked this up last summer from a guy that couldn't get it running. Traded in. A stock single slammer with Silvia front end
Was tored up everywhere with a rb20 swap that never saw the light.
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120808_110715.jpg
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120808_110736.jpg
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120808_110650.jpg


Took it to the house and started doing some cleaning
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120816_134408.jpg
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20121030_171512.jpg

Not trusting the guy I decided to pull out the rb and get everything to install yhe sr20 I had in the machine shop

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120913_172640.jpg
http://i973.photobucket.com/albums/ae219/gsxr750_photo/photo.jpg

Got rid off the ugly zenki front end and picked up a jdm kouki, upgraded to 5 lugs and Installed kouki sideskirts,tails and z32 brakes

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20121201_120740.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20121113_215258.jpg
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20121127_144725.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20121212_091546.jpg

Did some body work, car is running and did a few upgrades on the bay.
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130429_152352_zps4e869923.jpg
http://i973.photobucket.com/albums/ae219/gsxr750_photo/photo-3_zps0ccb8eff.jpg

On the way to get it tuned

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130103_132731.jpg

[silviaNC]

Really liked how paint job came out.
Also some pics of the rb26 I started to build. Currently taken apart
Tomei cams
Supertech valvetrain, bronze guides
Greddy 1.2mm HG
Je 87mm pistons 8:3:1
Eagle rods
Raw brokerage twin scroll manifold
Precision 6262 bb t4 .83
ID 1000cc
Z32 tranny
Act clutch kit
http://i973.photobucket.com/albums/ae219/gsxr750_photo/facebook_1623566072_zps45a4d1dd.jpg

[xblue__smokex]

love the build :)
i also despise the zenki front ends
kouki all the way
however, I am wondering why you went for sr20 instead of examining the rb26

sr20 is like the B18B of the honda world

anyway im likin it

gl on it and i love that front end :)

GET RID OF THAT EBAY MUFFLER ASAP

[silviaNC]

love the build :)
i also despise the zenki front ends
kouki all the way
however, I am wondering why you went for sr20 instead of examining the rb26

sr20 is like the B18B of the honda world

anyway im likin it

gl on it and i love that front end :)

GET RID OF THAT EBAY MUFFLER ASAP

Thanks! It was an rb20 not 26.it was between a stock rb20 or built sr. Rb26 build is on progress atm and will be pulling the sr after its done. Sr pulls hard atm. Installed a new cam, twin scroll manifold and aem water meth kit. Shooting for high 400's.

This showed up at the door for rb26.
Supertech valvetrain and wsp harness for haltech plug in

[carlos-s14sr20]

@ silviaNC what offset are the varrstoen?

[silviaNC]

10.5+30 rears/9.5+22 fronts

[vJilly]

love how the car went from meh to super dope. awesome kouki.

[carlos-s14sr20]

Dam looks good. What camber u running ?

[soundboy]

Daily?

Sent from my GT-P3110 using Tapatalk 4

[sterlinge]

Nice work!

[1995rbnasty]

damn nice motor right there rb26 that is

[greenwood]

the rb20 went in my 240 and ran great! good luck with your future builds!

[silviaNC]

Running stock camber and pretty much a fast dd, will go drag setup on the rb26.

[double zero]

awesome thread!!

[silviaNC]

Took the car to get a one piece exhaust. Tired of changing gaskets. http://img.tapatalk.com/d/13/10/18/9e4ezy4e.jpghttp://img.tapatalk.com/d/13/10/18/yna5y6et.jpghttp://img.tapatalk.com/d/13/10/18/e5yjyraj.jpg

[greenmachine300zxtt]

nice build! i cant wait to see pics and if any vids loaded for the rb26 6262

[silviaNC]

Took it out for a ride. Enjoying it ao far. Raw brokerage started to fabricate the manifold for the rb26 and longblock is halfway assembled

[silviaNC]

What arrived last week

Sent from my SCH-I535 using Tapatalk

[silviaNC]

Valve covers done

Sent from my SCH-I535 using Tapatalk

[ZenkiDeven19]

Valve covers done

Sent from my SCH-I535 using Tapatalk

Love the build man

[ZenkiDeven19]

I don't what it is but I actually kinda like the zenki front ends

Sent from my SCH-I535 using Tapatalk

[mewantkouki]

Why did you paint that grille blue..?

[juvi22003]

Looks awesome, cant wait to start working on mine......

[greenmachine300zxtt]

mind me asking where you got your valve covers done at? looks awesome

[silviaNC]

Thanks guys, a friend of my did it here. He's does some awesome jobs

Sent from my SCH-I535 using Tapatalk

[silviaNC]

Mighty oil pan done

Sent from my SCH-I535 using Tapatalk

[Yellow4g63]

Did you update the crank collar? or just going to keep the revs low?

[silviaNC]

Raw brokerage crank collar, N1 oil pump with spool billet gears. Hope to go 8.5-9k.

Sent from my SCH-I535 using Tapatalk

[Yellow4g63]

Raw brokerage crank collar, N1 oil pump with spool billet gears. Hope to go 8.5-9k.

Sent from my SCH-I535 using Tapatalk

Nice sounds like the oiling will be under control.

[Lockiess15]

Are the N1 pumps actually decent? Seem to hear mixed opinions on them but I'm not a RB person as I favour JZ's more so wouldn't really know the do and don'ts of these engines tbh lol. Other then that nice build :)

[KravingAKouki]

The N1 pump is alright, but if you are going for high hp numbers, for the sake of mind, i would grab a tomei pump. Or if you have the money, there is always the dry sump option.

[Yellow4g63]

It's not really a N1 pump in more with the Billet gears in it.

[KravingAKouki]

It's not really a N1 pump in more with the Billet gears in it.

You think an N1 pump with billet gears is better than a tomei/greddy pump?

[Yellow4g63]

That's what the Tomei/Greddy pumps have in them, tho not spool gears but upgraded gears.

[KravingAKouki]

That's what the Tomei/Greddy pumps have in them, tho not spool gears but upgraded gears.

I knew that, I just have always read that the quality of the Tomei/Greddy pumps is next to none in comparison to the upgraded N1's. Hmm, Thanks for the info

[Yellow4g63]

I knew that, I just have always read that the quality of the Tomei/Greddy pumps is next to none in comparison to the upgraded N1's. Hmm, Thanks for the info

ahhh sorry. I would have to compare it with the nitro pumps. people said those things were way better than the tomie units over on skylines Australia.

[KravingAKouki]

ahhh sorry. I would have to compare it with the nitro pumps. people said those things were way better than the tomie units over on skylines Australia.

Do you have any links to a discussion in regards to these pumps, if there is one? Thanks

[Yellow4g63]

Not anymore, used to have them booked mark in my old PC but that died a while back.

[silviaNC]

Nice sounds like the oiling will be under control.

Really hope so. 10qts of oil should be enough supply lol. Will be installing this oil drain setup this week.

Sent from my SCH-I535 using Tapatalk

[silviaNC]

rb assembled and installed the precision 6262. So far loving it. Have a jwt clutch kit and flywheel on the way with Ross tuff metal jacket damper

65637



Sent from my SCH-I535 using Tapatalk

[silviaNC]

Are the N1 pumps actually decent? Seem to hear mixed opinions on them but I'm not a RB person as I favour JZ's more so wouldn't really know the do and don'ts of these engines tbh lol. Other then that nice build :)

I dont have a lot of experience on the pumps. Swap came with a new n1 pump and decided to upgrade gears. Id say should be good enough with the crabk collar,balanced crank, ross tuff metal jacket balancer.

Sent from my SCH-I535 using Tapatalk

[silviaNC]

Some pics updates. Drilled/tap coolant runner for eater temp gauge sensor, exhaust side done. Currently waiting on some tomei throttle coat for the ITB's and will be rdy to assemble intake side JWT z33 250mm clutch kit with rb lightweight flywhee67008670096701067011

Sent from my SCH-I535 using Tapatalk

[silviaNC]

Project moving along. Few bay shots. Installing heater hoses, brake lines, ic piping next707327073370734

Sent from my SCH-I535 using Tapatalk

[KravingAKouki]

why does the oil pan sit so low? Looks like you are using mckinney mounts, so your hood clearance should be fine, but they have the oil pan sit low? Yikes

[silviaNC]

why does the oil pan sit so low? Looks like you are using mckinney mounts, so your hood clearance should be fine, but they have the oil pan sit low? Yikes

yeah they are mckinney mounts. This Oil sump extension holds 10 qts and is sitting lower than stock. Dont mind the clearance when having twice the capacity:). Just gotta be carefull with thos pot holes lol

Sent from my SCH-I535 using Tapatalk

[KravingAKouki]

What pan is it? A stock one just modified? or an aftermarket pan with extended oil sump?

[silviaNC]

Go back a few pages

Sent from my SCH-I535 using Tapatalk

[KravingAKouki]

I checked, all I saw were pictures... Am I missing it?

[silviaNC]

I checked, all I saw were pictures... Am I missing it?

Stock pan with sky-engineering weld on xtension sump

Sent from my SCH-I535 using Tapatalk

[kouki-gymkhana]

Please post a vid of it running so I can hear what the RawBrokerage manifold and turbo kit sound like! I'm very interested in purchasing their whole setup but I might go with a 6boost single scroll manifold just for the crazy sound it makes.

[silviaNC]

Please post a vid of it running so I can hear what the RawBrokerage manifold and turbo kit sound like! I'm very interested in purchasing their whole setup but I might go with a 6boost single scroll manifold just for the crazy sound it makes.

Wont be long before having it on the road

Sent from my SCH-I535 using Tapatalk

[silviaNC]

Few pics of work done lately. Work is so busy i barely have time to work on it.
Engine bay look
http://i973.photobucket.com/albums/ae219/gsxr750_photo/IMG_20140603_231829_zps56ac3279.jpg

Setting up fuel lines. Earl fittings and pro lite 6an lines
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20140606_190621_zps69aa9199.jpg

Setting up GM flex fuel sensor
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20140602_171202_zpsfb60acff.jpg
http://i973.photobucket.com/albums/ae219/gsxr750_photo/IMG_20140606_095857_zpsd850fdf8.jpg

xrp power steering hose with earl fittings and pro lite low pressure setup
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20140605_141741_zps93347665.jpg


More goodies
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20140607_093759_zps7ba0ad72.jpg

The ugliest part of the build. Had to cut shifter hole back a bit to fit the z32 tranny. Center console and boot fits fine. Just have to make a cover the excess around the shifter. Once done will clean up and make it look pretty

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20140530_191717_zpsfe150fcc.jpg

Sent from my SCH-I535 using Tapatalk

[silviaNC]

So car it's ready, here are the numbers on 93 octane and 19psi. https://www.facebook.com/video.php?v=773329676088103


Sent from my iPhone using Tapatalk

[AWD260R]

Super sweet build!! Is this the Vlad that had that beast of a Supra, the black one? Also would that GM flex fuel sensor be one that works with the AEM S2?

[Highway Riding]

Keep up the good work man... This would be one of my dream setups for sure. Can't wait for vidz

[silviaNC]

Keep up the good work man... This would be one of my dream setups for sure. Can't wait for vidz

Thanks, it's been a long journey

Super sweet build!! Is this the Vlad that had that beast of a Supra, the black one? Also would that GM flex fuel sensor be one that works with the AEM S2?

I'm sure that's him, he has a silver supra now. Flex fuel sensor will work with any standalone(gm sensor). I didnt get to use it or the methanol kit due to reaching my goal on pump. Def will keep it for later on. Maybe when I'm rdy for e85 and 800horses.



Sent from my iPhone using Tapatalk

[AWD260R]

Thanks, it's been a long journey



I'm sure that's him, he has a silver supra now. Flex fuel sensor will work with any standalone(gm sensor). I didnt get to use it or the methanol kit due to reaching my goal on pump. Def will keep it for later on. Maybe when I'm rdy for e85 and 800horses.



Sent from my iPhone using Tapatalk

That's cool, he looks to be a great tuner, he helped me unscrew tunes I got from so called tuners by youtube videos. I see you plumbed in the flex fuel sensor with an A/N fitting, did you weld on a fitting or it's a special fitting? care to share because down the road I'll be working this into my setup. Thanks! I got a meth kit on mine also but the last tune I got done didn't even tune it in right (tired of wasting money on so called tuners) you seem to make great power on less boost than I am, what's the specs on your cams and any head work?

[silviaNC]

That's cool, he looks to be a great tuner, he helped me unscrew tunes I got from so called tuners by youtube videos. I see you plumbed in the flex fuel sensor with an A/N fitting, did you weld on a fitting or it's a special fitting? care to share because down the road I'll be working this into my setup. Thanks! I got a meth kit on mine also but the last tune I got done didn't even tune it in right (tired of wasting money on so called tuners) you seem to make great power on less boost than I am, what's the specs on your cams and any head work?


No complains so far. They are AN fittings from 3/8 to 6an. Make sure u get the second version that are have threads and not clips(horrible stories of cars getting on fire). Cams are tomei type b, stock head and complete super tech valve train


Sent from my iPhone using Tapatalk