Parting out RB26DETT (R32)

[OutToWinPAHC]

I got this motor as part of a large trade and really dont need it. I also have RB25 parts for sale in another ad.

R32 RB26DETT

Bare Block with crank girdle and rear main cover $450
Stock Crank, good clean journals $350
Stock cams $ Sold
OEM pistons with connecting rods $120
Timing components -will go with block
oil pickup goes - with block
GTR oil pan wit diff (no axles or axle seals ) $100
Cylinder head - should be taken apart, cleaned, and new valve stem seals and solid lifters should be reshimmed. I only have about 20 or the 24 OEM shims, but you should be re-shimming anyhow if your building up. $350.00
ECUs $150 for the early R32, $170 for the later R32
Engine harness, coil harness, ignitor, injector harness $ Sold
power steering pump (Hicas ) $40.00
Power steer pump bracket RB26 $40.00
OEM turbo piping, tubes, BOV, suction parts $50.00 for the lot add $20 for the BOV's
MAFs both for $75
CAS $45
Intake and ITB's and IAC valve (no coolant temp sensors or TPS) $175.00

Ask me about any small parts -



Block needs a hone or boring, though there is still some cross hatch. Requires ARP main studs (old owner did not label main bolts in order, and cylinder head should be serviced with shimming (you should be doing this anyhow). I dont have the coil packs,



http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4635_zps6adcc534.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4638_zps3df3926a.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4636_zps5cda5e2a.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4633_zps14ad3802.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4634_zps09f3e72a.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4630_zps2ebc3b7e.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4631_zps14e6305b.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4629_zps3c08d320.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4632_zpsf68fbc58.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4627_zps89440191.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4628_zps29f42595.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4626_zps01263909.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4625_zps8c1daea7.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4624_zps75c4448d.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4620_zps38905a7d.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4623_zps9dc2b4b3.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4622_zpsf2b5e871.jpg

http://i32.photobucket.com/albums/d47/outtowinpahc/DSCF4621_zpsb51fefcf.jpg

[S12 Drifter]

how much for 440cc injectors gtr and the injector resistor box?

[silviadrag]

Do You Happen To Have The Clutch Fan

[OutToWinPAHC]

No but a friend does maybe he is willing to sell it... what would you offer

[OutToWinPAHC]

sorry I dont have the injectors or injector resistor for sale

[DJZ]

willing to ship the head? also do you have an rb26 valve cover?

[OutToWinPAHC]

Valve covers are not for sale... Head can be shipped for about 55-70 bucks and I would need to get a better quote from fedex though so it could go up or down and I would need a few days to find a good box and packing material. Head with cams is 72 lbs so it's probably closer to 55-60lbs. If your interested PM me your zip code and I'll come up with something.

[mjpagan89]

looking for a crank pulley if you decide to part I gots cash!

[OutToWinPAHC]

Never had one for it

[mjpagan89]

Sorry I meant crank timing gear. My bad.

[silviaNC]

Pmed bout block gridle baffle plates lmk

Sent from my SCH-I535 using Tapatalk

[SoCal180]

would you ship the block and head and if so would you take 750 shipped

[OutToWinPAHC]

Those are gone