Fully built sr20det gtx3071r twin scroll 1k miles. Ready to go

[silviaNC]

Testing waters, just got out of the dyno and everything is done, turn key swap rdy to go. 50 miles on it.
UPDATED-( now 800) FINALLY GOT CAR BACK AND PUT SOME MILES ON IT THIS MONTH
Considering parting out or full swap.
Have way more than that invested.
Now that swap is complete I'm thinking on moving on to the next project
Built s13 sr20det
Block:
Crower rods
Cp pistons 8:5:1
Blanced crankshaft
Acl bearings
Mazworks main studs
Arc oil pan

Head:
Cometic head gasket
Arp studs
Port job
Supertech valves
Springs and retainers
Hks 272 step 2 cams and hks cam gears
Ras
Custom intake manifold with q45 tb
Nismo 740cc inj. Flow tested amd cleaned

Turbo:
Pretty much new gtx3071r t3 .83 garrett
Turbo smart 38mm wg
Egay top mount manifold (only knock off part on this built and needs to be upgraded to turn up boost)

Drivetrain
Sr tranny with act streetlite flywheel
Competition clutch stage 4 and pressure plate.
Shaftmasters 1 pc aluminum ds

Electronics
Haltech ps 1000 and wiring specialties upper amd lower harness,





Including koyo rad, alum fan shroud, and.a.few more.goodies
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130426_125436_zps438d66b0.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/photo_zps6b306ec3.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130105_080400_zps6dc5ec52.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130127_142120.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130118_122812.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120904_203403.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-21_10-52-53_56.jpg


http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-20_18-23-44_291.jpg


http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-21_17-33-59_892.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-21_12-26-59_882.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-05-09_14-59-09_317.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-05-10_10-21-50_545.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120801_174810_zpsea883fad.jpg

[silviaNC]

Finally car is done and already put 800* miles on it soon to be 1k. My rb26 swap is also % 90 complete so need to fund the rest of the build.
Looking to sell.at least longblock before start to part out.

[ehp]

dude this is badass. i would seriously consider buying this if i didnt have a s14. stupid rule of engine swap rules of same year or newer

[silviaNC]

dude this is badass. i would seriously consider buying this if i didnt have a s14. stupid rule of engine swap rules of same year or newer

Thanks. Harness is s13 sr to s14 from.wiring specialties. Also.I'm adding the twin scroll manifold. I will update parts list Price in the morning

[silviaNC]

Dyno sheet. Was on super flow dyno wich reads lower.93 pump gas. Couldnt pass 16 psi due to ebay manifold( single scroll)and only rev 7600 for break in. should be good up to 8300 with shim mod
Longblock $2.5k
Head:
Hks step 2 264/272 ( will include 272 IN)
HKS cam gears
Supertech valves
Springs and retainers(compmetly forgot brand.think they are supertech)
Dual rocker shim mod
Ported head
Arp head studs
Cometic hg

Block:
Cp pistons 8:5:1 86.5mm
Crower H rods
Acl bearings
Balanced and micropolished crankshaft
Mazwork main studs
Arc oil pan.
Oil galleries ported.

Intake manifold $600
Includes thermal gasket
Q45 Tb and coupler

Nismo 740 injectors $400
Were.cleaned and tested. Gotta find the sheet but they were 2-3% within each other. Will include fuel rail with new o-rings

Haltech ps1000 with s13 sr patch loom, boost trim controller, air temp sensor and s13sr to s14 engine harness/upper-lower
Included $1500

Garett GTX3071R twin scroll .83 T3
1k miles like new with twin scroll manifold 44mm vband wg flange $1500

Turbosmart 38mm 2 bolt wg $150

Act flywheel $200
Compt clutch kit $350
Shaftmaster 1pc alum DS $225
Sr tranny $150
Sr koyo rad $250

[silviaNC]

Pls feel free to txt.too many pms, 9196283544

[silviaNC]

Bump. Would like to sell longblock before parting out. Willing to take 2.5 k for it

[powahousealex]

Willing to take everything up to turbo and back to manifold

[silviaNC]

Willing to take everything up to turbo and back to manifold

Shoot me a txt for details

[gsn0526]

how much just for turbo and wg?