Niley
08-30-2013, 01:56 AM
Parting out my sr20det swapped datsun 260z
If i didnt list a part, I might have it, dont hesitate to ask.
I am located in Morton Grove(60053) Illinois.
Best way to contact me is through email: [email protected]
Built Longblock (almost brand new, still needs to be broken in, under 500 miles) - Asking $2000
CP pistons 86.5MM
manley rods
ARP Mainstuds
ARP Headstuds
ARP Rod Bolts
New timing chain/guides
Cosworth headgasket
Newer Timing Chain and All components
New Water Pump
New Oil Pump
P2M rocker arm stoppers
Ported / Polished Head
Ferrea valve springs/Ti Retainers
BC 264 cams intake/exhaust
GTX3071r a/r 60, Hot side is .63 4 Bolt - pretty much brand new, maybe 500 miles on it(will come with all lines) - $1000
http://i.imgur.com/d7pkGoE.jpg?1
http://i.imgur.com/SeqSweJ.jpg?1
http://i.imgur.com/T2z2abd.jpg?1
http://i.imgur.com/xcvrkHM.jpg?1
Custom made manifold(there isnt a whole lot of space on the exhaust side in s30, not many manifolds would fit) -$200
http://i.imgur.com/QdBayVi.jpg?1
http://i.imgur.com/JQdlQ6c.jpg?1
http://i.imgur.com/CiEWAs8.jpg?1
http://i.imgur.com/yGfKww3.jpg?1
Tial 44mm wastegate - $200
http://i.imgur.com/R246SKd.jpg?1
Greddy type R BOV - $200
http://i.imgur.com/RtiDMBS.jpg?1
http://i.imgur.com/WrIAjONh.jpg?1
Crank Angle Sensor - 100 for clear and 80 for solid one
http://i.imgur.com/2t2Z306.jpg?1
Chasis:
1974 Datsun 260z with molded in flares and custom dash(will come with 350z seats as well) Rolling chasis, needs paint, new locks and some body work- $1500
I'll be installing stock 280z suspension and some cheap wheels this weekend, title in hand. No front dam or cf bumpers, they are sold(as is whole suspension). Motor mounts in place for sr20det swap, i will leave harness in as well.
http://i.imgur.com/M2AArT1.jpg?1
http://i.imgur.com/Lu8UYTF.jpg?1
http://i.imgur.com/2J9x837.jpg?1
http://i.imgur.com/oK76bSJ.jpg?1
http://i.imgur.com/GvTKOmJ.jpg?1
http://i.imgur.com/V7ZoXSd.jpg?1
Wheels:
Made by English company Revolution Competition Wheels
I emailed them to get some more info and I was told that these are discontinued for quite a long time now(15+ years), have magnesium centers and are very rare these days. In past 3 years Ive only seen one other set for sale and one set on Adam Carollas Datsun.
They were re finished by Wheels of America 2 years ago, which included new powder coat and polish but since the car has been sitting they need a re-polish. No damage on wheels. Lug nuts come with them.
They are 3 piece. 15x8 front and 15x9 rear, zero offset from what I know. Tires are free with them.
Asking $1400(can be seen on pics above)
http://i.imgur.com/WfdemZp.jpg?1
Thanks for looking!
If i didnt list a part, I might have it, dont hesitate to ask.
I am located in Morton Grove(60053) Illinois.
Best way to contact me is through email: [email protected]
Built Longblock (almost brand new, still needs to be broken in, under 500 miles) - Asking $2000
CP pistons 86.5MM
manley rods
ARP Mainstuds
ARP Headstuds
ARP Rod Bolts
New timing chain/guides
Cosworth headgasket
Newer Timing Chain and All components
New Water Pump
New Oil Pump
P2M rocker arm stoppers
Ported / Polished Head
Ferrea valve springs/Ti Retainers
BC 264 cams intake/exhaust
GTX3071r a/r 60, Hot side is .63 4 Bolt - pretty much brand new, maybe 500 miles on it(will come with all lines) - $1000
http://i.imgur.com/d7pkGoE.jpg?1
http://i.imgur.com/SeqSweJ.jpg?1
http://i.imgur.com/T2z2abd.jpg?1
http://i.imgur.com/xcvrkHM.jpg?1
Custom made manifold(there isnt a whole lot of space on the exhaust side in s30, not many manifolds would fit) -$200
http://i.imgur.com/QdBayVi.jpg?1
http://i.imgur.com/JQdlQ6c.jpg?1
http://i.imgur.com/CiEWAs8.jpg?1
http://i.imgur.com/yGfKww3.jpg?1
Tial 44mm wastegate - $200
http://i.imgur.com/R246SKd.jpg?1
Greddy type R BOV - $200
http://i.imgur.com/RtiDMBS.jpg?1
http://i.imgur.com/WrIAjONh.jpg?1
Crank Angle Sensor - 100 for clear and 80 for solid one
http://i.imgur.com/2t2Z306.jpg?1
Chasis:
1974 Datsun 260z with molded in flares and custom dash(will come with 350z seats as well) Rolling chasis, needs paint, new locks and some body work- $1500
I'll be installing stock 280z suspension and some cheap wheels this weekend, title in hand. No front dam or cf bumpers, they are sold(as is whole suspension). Motor mounts in place for sr20det swap, i will leave harness in as well.
http://i.imgur.com/M2AArT1.jpg?1
http://i.imgur.com/Lu8UYTF.jpg?1
http://i.imgur.com/2J9x837.jpg?1
http://i.imgur.com/oK76bSJ.jpg?1
http://i.imgur.com/GvTKOmJ.jpg?1
http://i.imgur.com/V7ZoXSd.jpg?1
Wheels:
Made by English company Revolution Competition Wheels
I emailed them to get some more info and I was told that these are discontinued for quite a long time now(15+ years), have magnesium centers and are very rare these days. In past 3 years Ive only seen one other set for sale and one set on Adam Carollas Datsun.
They were re finished by Wheels of America 2 years ago, which included new powder coat and polish but since the car has been sitting they need a re-polish. No damage on wheels. Lug nuts come with them.
They are 3 piece. 15x8 front and 15x9 rear, zero offset from what I know. Tires are free with them.
Asking $1400(can be seen on pics above)
http://i.imgur.com/WfdemZp.jpg?1
Thanks for looking!