Lots of SR20DET Parts! OEM & Aftermarket! 55 Pictures! Check it Out!

[s13 drifta]

Hi, I am listing some of my sr20det parts that I no longer need. If you see anything you are interested in please post or send me a PM. Prices do not include shipping, please leave zip code for quote. I accept paypal and ship fast.


OEM head bolts w/ washers-$20
http://imageshack.us/a/img571/2821/sr20detparts028.jpg

S13 cams-$70 for pair
S13 cam gears-$30 for pair
http://imageshack.us/a/img714/7574/020uqk.jpg

Oil feed tubes-$30 for pair
http://img837.imageshack.us/img837/1949/022ok.jpg

Rocker arms-$10 each
http://imageshack.us/a/img685/6640/227md.jpg

S13 blacktop valve cover w/ T and PCV valve-SOLD
http://imageshack.us/a/img705/6739/sr20detparts003.jpg

Valve cover T-$5
http://imageshack.us/a/img838/8729/sr20detparts032.jpg

OEM oil cap-$10
http://imageshack.us/a/img194/4927/6ghh.jpg

OEM timing cover / oil pump-$80
http://imageshack.us/a/img198/7158/sr20detparts001.jpg

Timing chain tensioner-$30
http://imageshack.us/a/img802/9031/m617.jpg

Crank / oil pump collar-$10
Crank pulley bolt w/ washer-$10
Lower timing chain gear-$10
http://imageshack.us/a/img706/862/un8m.jpg

S13 pulleys
P/S pulley-SOLD
Water pump pulley-$10
Alt. pulley-$10
http://imageshack.us/a/img713/7556/sr20detparts035.jpg

Thermostat housing-$20
http://imageshack.us/a/img825/2519/004ju.jpg

Temp sensor harness-$20
http://imageshack.us/a/img542/4305/sr20detparts017.jpg

Water outlet-$30
http://imageshack.us/a/img826/6452/j2ku.jpg

Water inlet-$20
http://imageshack.us/a/img707/636/003gdh.jpg

S13 intake manifold-$40
http://imageshack.us/a/img832/8123/004nsh.jpg

Intake manifold brackets-$20 for all 3
http://imageshack.us/a/img585/4889/017ur.jpg

PCV valve to intake lines-$20
http://imageshack.us/a/img198/4153/sr20detparts018.jpg

Coolant lines under intake manifold-$30
http://imageshack.us/a/img17/7504/sr20parts049.jpg

S13 throttle body w/ auto TPS-$60
http://imageshack.us/a/img802/2788/005te.jpg

Auto TPS-$30
http://imageshack.us/a/img687/5779/sr20detparts014.jpg

S13 fuel rail-SOLD
http://imageshack.us/a/img607/4201/sr20detparts037.jpg

FPR-$15
http://imageshack.us/a/img600/2258/014wxg.jpg

Mishimoto radiator cap-$15
http://imageshack.us/a/img855/38/sr20detparts022.jpg

Q45 MAF-$50
http://imageshack.us/a/img24/9365/s0uk.jpg

OEM exhaust manifold-$40
http://imageshack.us/a/img138/5633/srsm.jpg

Blacktop rods-$80 for all 4
http://imageshack.us/a/img811/6783/sr20parts020.jpg

Crank girdle-$40
http://imageshack.us/a/img534/6007/ziw9.jpg

Main bolts w/ washers-$20
http://imageshack.us/a/img41/5328/4wpz.jpg

Oil sending unit-$15
http://imageshack.us/a/img90/2263/lw6d.jpg

Oil dip stick w/ housing-$25
http://imageshack.us/a/img401/1503/yhrc.jpg

Dip stick housing-$10
http://imageshack.us/a/img31/2764/sr20parts046.jpg

Knock sensor harness-$20
http://imageshack.us/a/img94/7347/sr20detparts016.jpg

Rear seal housing w/ seal (one tab broke)-$20
http://imageshack.us/a/img811/3140/sr20detparts010.jpg

SR engine flex plate-$40
http://imageshack.us/a/img5/9761/0113r.jpg

SR OEM flywheel (resurfaced then used for 5k miles)-$50
http://imageshack.us/a/img4/8348/0023hl.jpg

SR flywheel bolts-$20 for all 8
http://imageshack.us/a/img29/9555/sr20detparts030.jpg

Throwout bearing sleeve-$10
http://imageshack.us/a/img801/6954/sr20detparts031.jpg

S13 complete manual driveshaft non abs-$120
http://imageshack.us/a/img577/3922/sr20detparts006.jpg

SR / KA engine brackets-$40 for pair
http://imageshack.us/a/img713/6458/014iqs.jpg

Skyline engine mounts (240sx upgrade, solid rubber)-$120
http://imageshack.us/a/img600/2118/003uco.jpg

J4 type x blacktop engine harness (complete and uncut)-$190
http://imageshack.us/a/img51/1895/007iu.jpg

J4 type x Intec tuned ecu with switchable tune (up boost, modified fuel and timing, no fuel cut, all bolt ons)-$200
http://imageshack.us/a/img831/1589/008vch.jpg

Ignitor chip-SOLD
http://imageshack.us/a/img826/9008/006loo.jpg

Coil pack harness-$30
http://img801.imageshack.us/img801/9373/004sxp.jpg

T28/GT28 bottom mount turbo line kit (steel braided water lines, hard oil line, AN fittings, banjo bolts, and washers)-$60
http://imageshack.us/a/img41/4281/qtw2.jpg

T25 water inlet line-$10
T25 oil feed line-$10
Water line banjo bolts-$5 each
http://imageshack.us/a/img809/5581/7bep.jpg

DIF Goodridge T2 bottom mount return line-$40
http://img18.imageshack.us/img18/3470/sr20detparts009.jpg

T2 3 bolt compressor outlet-SOLD
T2 HKS 2 bolt compressor inlet-$30
http://imageshack.us/a/img715/8446/sr20detparts023.jpg

Steel cold pipe (looks like Greddy)-$50
http://imageshack.us/a/img12/7931/001inz.jpg

[s13 drifta]

Vortech FMU 12:1-$80
http://imageshack.us/a/img12/4885/c3qm.jpg

Billet BOV w/ pipe-$40
http://imageshack.us/a/img809/5965/004xur.jpg

28x6.5x2.5 FMIC (little tweaked, still works good)-$30
http://imageshack.us/a/img856/9062/014ko.jpg

Autometer fuel pressure gauge w/ steel braided line-$30
http://imageshack.us/a/img560/7986/sr20detparts012.jpg

http://imageshack.us/a/img801/3686/sr20detparts013.jpg

Nitto NT555R drag radials 245/50/16 (only six 1/4 mile passes) -$200
http://imageshack.us/a/img545/1989/wn15.jpg

Thanks for looking!

[Napalm]

You has sr crank pulley without chips? If so shoot me a text 352-442-4665. Bump it uppp

[Kingtal0n]

I need an S13 IACV if you have...

[97nismo]

Ill take the alty pulley and waterpump pulley

[joker1984]

How much for ecu shipped to 31324

[jgdynamics]

Is that ignitor chip for an s13 redtop?

[applefrk15]

coolant lines to me! pm me for paypal info

[s13 drifta]

You has sr crank pulley without chips? If so shoot me a text 352-442-4665. Bump it uppp

No crank pulley, need anything else?

I need an S13 IACV if you have...

Yes, I have one. Let me know if you still need it.

Ill take the alty pulley and waterpump pulley

Alright, $20 plus $8 shipping.

How much for ecu shipped to 31324

$210 shipped, let me know if you want it.

Is that ignitor chip for an s13 redtop?

Thank you for purchasing!

coolant lines to me! pm me for paypal info

Thank you for purchasing!

[180sxqc]

ps pump by any chance?

[s13 drifta]

ps pump by any chance?

No, I don't have one. Need anything else?

[cherman240sx]

you dont by chance have a bare sr head do you?

[superadvan]

If u still have it ... The compressor 2 bolt inlet and oil cap to 96720

[JSVowels]

If you still have the oil pump, price shipped and pay palled to 29464?

[s13 drifta]

you dont by chance have a bare sr head do you?

No, I don't. Let me know if you need anything else.

If u still have it ... The compressor 2 bolt inlet and oil cap to 96720

Yes, I still have both. $40 plus $13 shipping.

If you still have the oil pump, price shipped and pay palled to 29464?

Yes, I still have it. $80 plus $15 shipping.

[s13 drifta]

First bump, still have lots of parts left.

[worr20]

Temp sensor harness shipped to 26003?