Torebaa
08-25-2013, 09:55 PM
City: Edmonds
State/Province: Washington
Price: $2000.00 FIRM PLEASE PM ME! LOCAL PICKUP ONLY! NOT PARTING OUT PACKAGE DEAL ONLY!
Item Description: I have a S13 SR20DET blacktop for sale. This engine came out of a 1997 Kouki 180SX and has roughly 45,000 kilometers on it. I purchased this engine a couple years ago from the folks at U.P. Garage in Washington and have put many parts and hours into freshening it up. Unfortunately, I have lost complete interest in s-chassis' and the engine has been sitting. I've changed direction and I'm currently saving to purchase a new truck, so this engine and all the parts associated with it need to go!
I will require a bill of sale with this engine.
Please be sure to read everything the engine includes.
The list includes...
-1997 S13 Blacktop SR20DET with factory T25 turbo
-5-spd transmission
-Engine and transmission wiring harnesses (complete and uncut)
-J4 ECU
-Ignitor and coilpacks
-Side mount intercooler and ducting is included
-Airbox and MAF
-Starter, alternator, and powersteering pump
-Original flywheel
-Original intake manifold with injectors and fuel rail are included
-Original black valve cover is included
-Shifter and transmission plate
-Radiator hoses, fans and other miscellaneous bracketry/ducting
List of new and aftermarket items common to the engine...
-New oil pump
-New water pump
-New timing chain and timing chain tensioner
-New crank pulley
-New water inlet and outlet
-New dipstick tube and dipstick
-New S14 throttle body pulley
-New factory fuel rail
-New valve cover and oil cap (was going to have this powdercoated)
-New idle air control valve
-New water temp sensors
-Greddy intake manifold powdercoated black
-Greddy large sump aluminum oil pan
-Tomei expreme stainless turbo elbow
List of new and aftermarket items in the box...
-New bando accessory belts
-New fuel filter
-New oil filter
-New O2 sensor
-New throw out bearing and clutch sleeve
-New coil pack cover
-New Walbro fuel pump and wiring
-New transmission bolts and other miscellaneous hardware
-Nismo slave cylinder
-Nismo braided clutch line
-Nismo clutch pivot ball
-Nismo radiator cap
-Parts associated with Greddy intake manifold
-SR20DET gasket kit with some gaskets that haven't been put on the engine yet
As you can see there are a ton of parts! I'm sure I missed a bunch a long the way, but basically this engine needs a intercooler setup to go with the Greddy intake manifold (or you can use the stock parts), a radiator with shroud, a clutch, and maybe some small parts and its good to go.
Please look at my photobucket album for all the pictures of the engine and parts.
------>>>Engine And Parts Photos by TrevorJM744 | Photobucket (http://s82.photobucket.com/user/TrevorJM744/library/Engine%20and%20parts?sort=3&page=1)<<<------
State/Province: Washington
Price: $2000.00 FIRM PLEASE PM ME! LOCAL PICKUP ONLY! NOT PARTING OUT PACKAGE DEAL ONLY!
Item Description: I have a S13 SR20DET blacktop for sale. This engine came out of a 1997 Kouki 180SX and has roughly 45,000 kilometers on it. I purchased this engine a couple years ago from the folks at U.P. Garage in Washington and have put many parts and hours into freshening it up. Unfortunately, I have lost complete interest in s-chassis' and the engine has been sitting. I've changed direction and I'm currently saving to purchase a new truck, so this engine and all the parts associated with it need to go!
I will require a bill of sale with this engine.
Please be sure to read everything the engine includes.
The list includes...
-1997 S13 Blacktop SR20DET with factory T25 turbo
-5-spd transmission
-Engine and transmission wiring harnesses (complete and uncut)
-J4 ECU
-Ignitor and coilpacks
-Side mount intercooler and ducting is included
-Airbox and MAF
-Starter, alternator, and powersteering pump
-Original flywheel
-Original intake manifold with injectors and fuel rail are included
-Original black valve cover is included
-Shifter and transmission plate
-Radiator hoses, fans and other miscellaneous bracketry/ducting
List of new and aftermarket items common to the engine...
-New oil pump
-New water pump
-New timing chain and timing chain tensioner
-New crank pulley
-New water inlet and outlet
-New dipstick tube and dipstick
-New S14 throttle body pulley
-New factory fuel rail
-New valve cover and oil cap (was going to have this powdercoated)
-New idle air control valve
-New water temp sensors
-Greddy intake manifold powdercoated black
-Greddy large sump aluminum oil pan
-Tomei expreme stainless turbo elbow
List of new and aftermarket items in the box...
-New bando accessory belts
-New fuel filter
-New oil filter
-New O2 sensor
-New throw out bearing and clutch sleeve
-New coil pack cover
-New Walbro fuel pump and wiring
-New transmission bolts and other miscellaneous hardware
-Nismo slave cylinder
-Nismo braided clutch line
-Nismo clutch pivot ball
-Nismo radiator cap
-Parts associated with Greddy intake manifold
-SR20DET gasket kit with some gaskets that haven't been put on the engine yet
As you can see there are a ton of parts! I'm sure I missed a bunch a long the way, but basically this engine needs a intercooler setup to go with the Greddy intake manifold (or you can use the stock parts), a radiator with shroud, a clutch, and maybe some small parts and its good to go.
Please look at my photobucket album for all the pictures of the engine and parts.
------>>>Engine And Parts Photos by TrevorJM744 | Photobucket (http://s82.photobucket.com/user/TrevorJM744/library/Engine%20and%20parts?sort=3&page=1)<<<------