z32 brake caliper size

[Str8silvias14]

I bought a set of z32 calipers from a guy that said that they were 26mm but I double checked when I got them and they seem like 30mm to me. I was trying to get a second opinion so I may get the right rotor size. thanks.

[waxball88]

I bought a set of z32 calipers from a guy that said that they were 26mm but I double checked when I got them and they seem like 30mm to me. I was trying to get a second opinion so I may get the right rotor size. thanks.
IIRC 30mm calipers, 34 or so mm wide.
26mm calipers, 30mm wide.
26mm calipers use a 24 mm rotor

I did the same thing and ordered the wrong rotors.

[Agamemnon]

30mm caliper = 35mm gap
26mm caliper = 30.2mm gap

[Str8silvias14]

So I'm going go get the rotor fort the 26mm if it's wrong will it anything get damaged or jacked up?

[dawagarage]

if you got 26mm rotors and it turns out your calipers are 30mm, the pistons have a few extra mm of travel when the brakes ate depressed... worst case scenario the pistons come partially or completely out and your brakes fail...

[MxS-PoWeR]

i question, z32 rear caliper are same size twin turbo VS non turbo?

[Mikester]

Everything y'all need to know is RIGHT HERE (http://importnut.net/300zxbrakeswap.htm)