PDA

View Full Version : CA konis hlsd z32 maf 300zx brakes sr exhaust suspension


Jfornachon
08-23-2013, 12:59 PM
Please read thread for updates. Prices are listed so please don't ask what I want for them. You can make a reasonable offer though. If it is not listed then I don't have it. Feel free to text/call me at 3one0 740 77one6.

Engine parts:
$3500 S14 sr20det w/Wiring solutions upper and lower harness, ACT streetlight flywheel, and stage 1 clutch, Nismo thermostat, Circuit sports engine pullys, alt and ps pump 8mo old water pump factory ecu, maf, Intercooler piping and walbro 255 fuel pump.
$100 FR sport fuel pressure in line gauge, and new AEM AFPR with nipples and fuel line.
$500 Factory gasket kit minus v/c gasket NEW, Factory timing chain kit NEW, Factory Oil pump NEW
$400 ATE super damper NEW
$750 S15 turbo Garrett (very lightly used maybe 1k miles if that much. You will need to clock it (I will explain if interested) also SS feed lines and restrictor for bb turbo. Lines and restrictor are NEW.

Suspension Parts:
$1800 Koni race front, Veilside housings front, koni yellow rear, Tein upper hats ft (lock nuts have been taped for the proper threads of the shocks) & rr, gc sleves and springs, Tein helper springs in the rr. They were on the car about 4months.
$200 Circuit sports suspension traction rods, toe rods, and tension rods.

Electronic parts:
$50 Original s14 sr harness. This ran the car properly with no issues and plugged into the s13 chassis.
$1900 Aem 30-6600 standalone with patch harness pre wired with AEM map, o2, iat, Factory clutch switch (W/sensors) and MAC EBC not wired in yet.

Exhaust Parts
$40 Megan 3in test pipe
$150 greddy down pipe. Has scratches and a slight dent. Its small so I cant imagine that it really affects performance much if at all.
$80 DIF fan controller
$100 P/S rack in the last year with new outer tie rods lines and resavor
$140 Greddy turbo outlet pipe/ o2 housing NEW

Brake Parts
$350 300xz brakes front calipers DIF SS lines and rotors.
$350 300zx brakes Rear dif ss lines (w/parking brake cables and components included)

Drivetrain Parts:
$700 S15 Helical diff. I installed new side bearings when I installed it into my car. Also comes with new pinion bearing and seal.
$300 Ichiba Hubs w/ miata extended arp studs 20 19mm steal lug nuts, extra spare studs,

Interior Parts:
$40 duel gauge pod mounted on steering column clam shell.
$40 Sun visor aftermarket
$50 Autometer 3 gauge a pillar pod

Jared

Kouki Chick
08-30-2013, 02:42 PM
Would you sell just the AEM FPR? Do you have pics?

Jfornachon
08-31-2013, 02:52 PM
Would you sell just the AEM FPR? Do you have pics?

I would prefer to not seperate it. As far as pictures look at aem's site under the universal fpr. Mine is brand new just out of the box as I was going to install it but never got around to doing so.

Have agerat day,
Jared

Chach
09-02-2013, 09:14 PM
does the s15 helical come with the pumpkin? Thanks

yodc
09-04-2013, 04:22 AM
interested in the koni setup. Are they 13 or 14 specific? I spent too much time at NRR and feel like using the $2k of insurance settlement in my pocket to get some real suspension. Either new variant 3's or a used koni setup (doesnt look like richard has been active for a few months on his thread at NRR so used is the only current option?)

I've read a few of your posts here and there and think these are loaded with Koni 8611-1257 (dual adjustable) in s13 housings from jdblood202 (http://nissanroadracing.com/member.php?u=3027) earlier this year.

spring rates?

the yellows work with standard s-chassis setup not z32 right? I'm guessing you went yellows to avoid the fork mount richard was doing.

rr? i'm rack'n my brain to figure out this abbreviation Rear Right doesnt make sense I think you mean ReaR?

the inserts, were they installed new on the car for 4 months of light duty without a track event, then the car was parted?

lastly, Pics?

Jfornachon
09-17-2013, 10:36 PM
Sorry for any missed replies. I have moved to Idaho and will be making a new listing.

Have a great day,
Jared