5casey1dimer0
08-20-2013, 11:06 PM
Not in a hurry to sell. Want to make a reasonable offer other than what I have listed? Go right ahead. 253 326 6355
S13 sr20det Power Fc D-Jetro with all sensors and engine harness. Commander included. $900
S13 sr20det Greddy intake manifold with throttle body. $500
Stock fuel rail, Nismo 740cc injectors, and adj. fpr $400
Tomei turbo manifold. Ugly Weld on top of collector to prevent a coming crack. $80
Garret gt2860rs "disco potato" turbo. T2 flange 5 bolt exhaust. Bolt on upgrade for sr20. Only custom thing needed is a hot pipe made. Only 4 events on it and 2 dyno sessions since new. $800
No name 3" down pipe for sr20det $100
Sr20det bell housing and transmission $350
OS Giken twin disk sr20det clutch. Good life on disks left. Pressure plate had some tough scoring from wrong TOB Collar being used. Works 100% fine. Will come with TOB and correct collar I bought new and used one track day. $800
One piece aluminum driveshaft for sr20 in s13 chassis. $350
S13 black top Sr20det complete long block. Head was hot tanked, decked, valve grind, new valve stem seals, stock cams, 100% fresh out machine shop only driven 4 times.
Bottom end brand new everything. acl race main and rod bearings, thrust washers, polished crank, honed block, brand new k1 tech rods, cp 8.5:1 pistons, apexi head gasket, and acl head studs.
Power steering pump, alt, belts, all included and working. All sensors and coil packs included.
Scoop on motor: last Sunday at SSSJ I was experiencing random blow by. A lot of it. However, the motor still had all of its power, 305/300 on dyno jet. All signs point to not enough time on the motor last year before I parked it for the winter. Oil separation rings are believed to have gone bad on a cylinder. Going to leak down test this weekend to verify. I'm over it- selling off the lot. Shoot me offers on a built engine that just needs some new rings and a proper break in.
I DO NOT CHECK FORUMS OFTEN- call or text me. Will ship on your dime. I can provide more specifics and pictures upon request. Motivated seller. Won't give hassle, won't take none. Serious inquires only please.
253 326 6355
S13 sr20det Power Fc D-Jetro with all sensors and engine harness. Commander included. $900
S13 sr20det Greddy intake manifold with throttle body. $500
Stock fuel rail, Nismo 740cc injectors, and adj. fpr $400
Tomei turbo manifold. Ugly Weld on top of collector to prevent a coming crack. $80
Garret gt2860rs "disco potato" turbo. T2 flange 5 bolt exhaust. Bolt on upgrade for sr20. Only custom thing needed is a hot pipe made. Only 4 events on it and 2 dyno sessions since new. $800
No name 3" down pipe for sr20det $100
Sr20det bell housing and transmission $350
OS Giken twin disk sr20det clutch. Good life on disks left. Pressure plate had some tough scoring from wrong TOB Collar being used. Works 100% fine. Will come with TOB and correct collar I bought new and used one track day. $800
One piece aluminum driveshaft for sr20 in s13 chassis. $350
S13 black top Sr20det complete long block. Head was hot tanked, decked, valve grind, new valve stem seals, stock cams, 100% fresh out machine shop only driven 4 times.
Bottom end brand new everything. acl race main and rod bearings, thrust washers, polished crank, honed block, brand new k1 tech rods, cp 8.5:1 pistons, apexi head gasket, and acl head studs.
Power steering pump, alt, belts, all included and working. All sensors and coil packs included.
Scoop on motor: last Sunday at SSSJ I was experiencing random blow by. A lot of it. However, the motor still had all of its power, 305/300 on dyno jet. All signs point to not enough time on the motor last year before I parked it for the winter. Oil separation rings are believed to have gone bad on a cylinder. Going to leak down test this weekend to verify. I'm over it- selling off the lot. Shoot me offers on a built engine that just needs some new rings and a proper break in.
I DO NOT CHECK FORUMS OFTEN- call or text me. Will ship on your dime. I can provide more specifics and pictures upon request. Motivated seller. Won't give hassle, won't take none. Serious inquires only please.
253 326 6355