1991 S13 Roller $3500

[datsunmotorsports]

Hello Zilvia, I have a pretty clean 91 S13 that Im trying to sell. If anyone can appreciate a car like this its gotta be Zilvia right?

http://images.craigslist.org/00000_gXbnYqfwrSj_600x450.jpg
http://images.craigslist.org/00R0R_j72MNJocDjS_600x450.jpg
http://images.craigslist.org/01111_9iebbHUBgwK_600x450.jpg

350Z anniversary wheels
Potenza run flat tires RE050A
ISIS 5 lug conversion
300zx z32 brake master cylinder
300zx z32 30mm front calipers and rear calipers with russell speed bleeders
Brembo dimpled and slotted rotors for the front and rear
Steel braided conversion brake lines
Yellow stuff race brake pads

KYB agx 4 way adjustable front and 8 way adjustable rear
tokico strut mounts
RS R race springs
God Speed rear control arms
Suspension tech front and rear sway bars
Pilot sports front and rear strut bars
S13 fender braces
tien front tension rods
tien inner tie rods with kazama outer tie rods
GodSpeed rear upper control arms, rear traction links, rear toe links
Kaaz 2 way LSD
Megan Racing differential brace
Viper 791xv two way alarm with power locks and power trunk with a remote start!
30% tint in the back
R32 front cross member

EDIT:
All for $3500 or part out
Car holds a clean title. Registration is valid through Feb 2014
It was aligned 3 months ago at Sullivan Brothers in Seaside Ca.

Car has no stereo deck or drivetrain.

http://zilvia.net/f/cars-sale/494477-1991-nissan-240sx-rb25det-ft-fs.html car in a past life.
I have all the 4 lug hubs and a set of black front fenders that can go with the car as well.

Looking for $3500 for a clean roller thats ready for a drivetrain swap.
I can deliver to the Bay Area for a fee.

[iVanRoz]

Part the wheels?

[datsunmotorsports]

Part the wheels?

You gonna make it worth my time?
My costs
$350 for the wheels
$340 ea tire
$80 M/B
$500 for the 5 lug adapters + my time to install
$30 lock nuts with key

[jesse_s13]

Wait so no motor?

[datsunmotorsports]

No engine/trans or related parts.

Ive been catching a lot of flak about the car being priced so high as a roller. Honestly though you could double that to build it yourself without an engine so seems very fair to me.

[datsunmotorsports]

I am considering parting it out.
S15 seats and belts would not be available.

Pricing below:
bare non-rolling shell, current reg and clean title $500
350Z anniversary wheels w/Potenza run flat tires RE050A $550
ISIS 5 lug conversion $400
z32 front brakes sold
Steel braided conversion brake lines $100
KYB agx 4 way adjustable front and 8 way adjustable rear $200
kyb agx fronts SOLD
RS R race springs rear set only $100
God Speed rear upper control arms $110
Suspension tech front and rear sway bars $250
Pilot sports front and rear strut bars $100
S13 fender braces $110
tien front tension rods $150
tien inner tie rods with kazama outer tie rods and rack $250
GodSpeed rear traction links $100
GodSpeed rear toe links $100
Kaaz 2 way LSD rear end $1000obo
Megan Racing differential brace $50
KOYO radiator with dual 10" fans $225
Front fenders $50 pair
RB swap cross member, mounts, driveshaft, and misc $450
Hood $75
and many more stock parts.

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/1173778_10201141754438774_1250558878_n.jpg

Other sold parts
steering wheel
clutch MC, SC, and hardline
Brake MC
viper alarm

steering wheel