More SR Parts // Performance

[Yeap]

I prefer local pick but I am willing to ship small parts at the buyers expense. I am located in San Diego California. Don't low ball me. Most parts have less than 8000 miles on them. PM is the best way to get a hold of me. If you do not see a part here, ask me I might have it.

New Spark plug cover for S13 SR. $80 Shipped
http://farm8.staticflickr.com/7448/9044912079_ac54e7cd42_o.jpg

S13 SR blacktop valve cover painted dark blue with flake. Includes gasket. $OLD

S13 SR blacktop head with Procomp Valve springs. $175. Expect to pay between $100-180 in shipping costs.
http://farm8.staticflickr.com/7434/9483091656_a96e32885c_o.jpg

Water neck ready for water temp gauge.
http://farm3.staticflickr.com/2883/9480294021_e6334c2af8_o.jpg

S13 SR Greddy head studs. $200
http://farm3.staticflickr.com/2877/9483096280_2f4e6308f8_o.jpg

Circuit Sports rocker Arm Stoppers for S13 SR. $OLD

S13 SR blacktop intake manifold, throttle body, and TPS. $100
http://farm6.staticflickr.com/5476/9480299927_b1a0a1397f_o.jpg

Used Apexi metal head gasket. Less than 3000 miles on it. $60
http://farm4.staticflickr.com/3827/9483097942_c1e486c55f_o.jpg
http://farm8.staticflickr.com/7315/9483098060_d0bb9f61c1_o.jpg

S13 SR blacktop upper oil pan. $40
http://farm4.staticflickr.com/3794/9480297887_62aa4cabe7_o.jpg

S13 SR Greddy oil pan. $OLD

Circuit Sports 480cc oil catch can. $OLD

Custom Oil catch can. Fits in fender. $OLD

S13 SR blacktop oil dip stick and tube. $20
http://farm4.staticflickr.com/3670/9480295285_88f987056f_o.jpg

OEM S13 SR oil filters. $OLD.

Garrett T28RS disco potato with Megan header and SS oil & water lines. No shaft play less than 8000 miles. $OLD

Megan elbow with o2 sensor. $60
http://farm8.staticflickr.com/7360/9483093516_a9f4b9c4db_o.jpg

Megan 3in downpipe. Banged up but no holes. Make me a offer
http://farm6.staticflickr.com/5516/9044913221_df3f32476a_o.jpg

Megan 3in test pipe with extra bung welded in. $40
http://farm6.staticflickr.com/5445/9047137654_104bb5b120_o.jpg

Magnaflow muffler 2" inlet dual 3" outlet. Has a nice deep tone. Left tip is scratched. $80
http://farm4.staticflickr.com/3672/9483093668_77a54fa93b_o.jpg

S13 front sway bar. $20
http://farm8.staticflickr.com/7406/9483092174_064bc1fe33_o.jpg

Custom heat shield for BMC. Notched on top for strut tower bar. $OLD

S13 SR radiator hoses. $60
http://farm8.staticflickr.com/7440/9044910979_c552440956_o.jpg

Tuned S13 SR ECU. 91 octane, Z32 MAF, 550cc injectors, GT28RS, increased rev limit, walbro 255. $300
http://farm8.staticflickr.com/7311/9044909843_288daaa515_o.jpg

Z32 MAF w/pigtail and cone filter adapter. $OLD

S13 SR wiring harness converted. $175
http://farm6.staticflickr.com/5338/9047135188_ca7359a1de_o.jpg

Cone filter. $10
http://farm8.staticflickr.com/7286/9044916173_4a23004ac3_o.jpg

S13 SR Manley H-Beam Rods. Manufactured from 4340 forgings. Heat treated, stress relieved, shot peened and magnafluxed. Weight matched sets + 1.5 grams. rod 3's base needs polished, $OLD

[b4l]

Custom Oil catch can. Fits in fender. $100

That's cool look did you have it made? Free bump

[carmaniac626]

Hey, just curious why are you parting out all these parts. I'm going for the same setup and was wondering if something went wrong or what? What kind are the 550cc injectors? Otherwise can do 1200 for turbo setup, maf sensor and ecu shipped to 98166? Txt me at 425-442-0505 for faster response!

Sent from my SGH-T999 using Tapatalk 2

[Yeap]

Custom Oil catch can. Fits in fender. $100

That's cool look did you have it made? Free bump

Thanks! Yea Mckinney Motorsports made it for me. low profile catch can.


Hey, just curious why are you parting out all these parts. I'm going for the same setup and was wondering if something went wrong or what? What kind are the 550cc injectors? Otherwise can do 1200 for turbo setup, maf sensor and ecu shipped to 98166? Txt me at 425-442-0505 for faster response!

Sent from my SGH-T999 using Tapatalk 2

I am parting because cylinder 3 piston melted and decided to go with a different motor setup. The only parts I am not selling are pistons and block. The ECU tune was on my nismo 550cc injectors. Also for sale here (http://zilvia.net/f/sale-items/517832-s13-brake-parts-sr-parts.html). Sent you PM on price.

[Zenki_LS1]

How much would shipping be to 60152?

[funes]

do u have s13 sr20 fan shroud?

[Yeap]

How much would shipping be to 60152?

That depends on the weight of the item you are interested in. Can you be more specific?

do u have s13 sr20 fan shroud?

Yes, for sale here (http://zilvia.net/f/sale-items/517832-s13-brake-parts-sr-parts.html)

[PeaceOnesxWai]

Would you ship the head? 626-274-4414

[b4l]

thanks for the parts. great packing.:rawk:

[Zenki_LS1]

Lol wow, yeah I didn't even ask for a part to ship. I must have been tired. How much for the s13 blacktop head shipped to 60152

[Yeap]

All PM's replied. More parts coming ... nismo motor mounts, ACL bearings, transmission cross member, gauges etc.

[carmaniac626]

If u are selling the wide band I'd take it.

Sent from my SGH-T999 using Tapatalk 2

[Vi3tSR20DET]

Might be interested in the megan elbow with o2. How much shipped to 94591?

[silviadrag]

Do You Have A Lower Harness? Price For The Valve Cover Ship To Ny 11003

[Yeap]

Bump,,,,,,

[Yeap]

Bump it up.