PDA

View Full Version : FL Complete Ka24de part out


Detky
08-06-2013, 08:45 PM
Hey so I'm parting out everything KA under my hood except the drivershaft, tranny crossmember.

Everything works and worked fine on my daily drive but the ka has a knock from running low on oil and so now I'm going balls to the wall on my rb swap. I need this sh*t gone so I can afford the final touches on my rb. Here's the parts list. Everything is out of a 1993 240sx hatchback that was 5 speed swapped Everything is best offer, I like to haggle so tickle my fancy, nothing has shipping included. The more you buy the more you save. Everything is on a first come first serve basis friends have dibs this will be on craigslist and on multiple Facebook groups.

head $150
Block that I think has a spun bearing: $150 (they are currently assembled with a good head gasket)
distributor $60
Distributor Wire cover that says Nissan $15
p/s pump $40
high pressure line is no good the rest are fine $15 a pop combine for savings
reservoir $20
Alternator $50
maf $30
oem intake tube $10
air box $10 ($5 with purchase of intake tube or maf)
starter is pending but $75 will take it
transmission $100
xtd stage 2 sprung full disc clutch $100
xtd chromoly 12lb flywheel $100 both have aproximately 600 miles (I did a proper 500 mile break in period with zero highway miles) buy both for $180
oem ka flywheel $40
oem clutch with about half life left $30 both for $55
radiator $25 has a small amount of damage but kept me cool even when drifting
k frame (the thing under the motor, I got an r32 for my rb) offer me up I'll beat ebay prices.
battery $75 started me everytime I'm relocating it and getting a smaller one.
I'm willing to part out valve cover, cams, cam caps, crank, pistons etc. Shoot me an offer I need cash.


I can't think of anything else but I'm sure there is something. Pm me, text me call me send me a carrier pigeon, the names Chris but most just call me Detky.
(904) 46five-23one3 I'm in Jacksonville, Florida

http://i1319.photobucket.com/albums/t668/Chris_Detky/Uploaded%20to%20my%20build%20thread/4e60eeb0-54e2-4c0a-818c-37ffada8afd0_zpsbc7e3b6b.jpg

JoeyTheKid
08-07-2013, 12:50 AM
I just want the block, crankshaft, and complete head. I see you're willing to part the rods and pistons so pm me if we can make this happen.

jdmspooge
08-07-2013, 11:38 AM
I need the cam tensioner. Lmk asap!

Detky
08-08-2013, 07:09 AM
day after hump day bump

Detky
08-11-2013, 08:59 AM
Bump, lowball me you guys. I need this shiz gone

Nibras
08-17-2013, 06:25 PM
Ill take the head 50$

JBB
08-17-2013, 09:30 PM
Can you do any better on the alternator shipped to tampa 33635?

Maeda
08-17-2013, 11:22 PM
I'll take that XTD flywheel off your hands if you split shipping

anti tyler
08-18-2013, 07:26 AM
Can you do any better on the alternator shipped to tampa 33635?


you want an alternator for cheaper than $50?? LOL!


What's up with that intake manifold, you getting rid of that also? Because I need one.

ground_shaking
08-22-2013, 04:21 PM
iac shipped 32765

240.jc
08-27-2013, 10:51 AM
still have the rods and pistons ?

Detky
10-07-2013, 06:43 PM
bump head is off the block and is pending, no longer selling power steering stuff, maf is sold. everything else is obo

salem
11-12-2013, 10:01 AM
Is it already taken apart? i need a whole engine complete even if it has a knock

cheesyriceo4
11-12-2013, 11:21 AM
Have a 5spd ECU?

Detky
11-12-2013, 11:31 AM
@Salem
Head is off the block and cams are out but valves and valve train are still in the head.
The bottom end is still assembled. If you want it come get it, shoot me a text.

@cheesyrice4 No, just an auto ecu $20 if you want it

Detky
11-12-2013, 11:32 AM
Computer double posted and I can't figure out how to delete the second post

cheesyriceo4
11-12-2013, 01:00 PM
PM sent!

10chars

Mustache240
11-12-2013, 02:05 PM
pm sent!
jhtdjysryk

Detky
11-13-2013, 11:45 AM
Both pms replied, anybody else?

Hoffman5982
11-17-2013, 05:02 PM
Pic of the ps pump? And how much shipped to 32514

ss008
11-21-2013, 10:39 PM
Air intake box shipped to 95132.