Godspeed Project Direct Bolt On Turbo's for SR and KA

[Fatboy Garage]

Godspeed Project Direct Bolt On Turbos for the SR20 and KA24.


TD05-18g Turbo (Actuator set at 1 bar )(14 psi)

http://www.godspeedproject.com/image/cache/data/turbo_charger/s1318g-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/s1318g_5-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/s1318g_3-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/s1318g_6-650x436.jpg
Completely stock SR20!!!!!!

$340 shipped within inner 48 states (Clocking adapters might be needed depending on previous turbo set up)





TD05-20G Turbo (Actuator set at 1 bar )(14 psi)


http://www.godspeedproject.com/image/cache/data/turbo_charger/s1320g-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/s1320g_5-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/s1320g_4-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/s1320g_3-650x436.jpg

$410 shipped within inner 48 states (Clocking adapters might be needed depending on previous turbo set up)





GT2871r Turbo (MOST POPULAR TURBO) (Actuator set at 8 PSI)

http://www.godspeedproject.com/image/cache/data/turbo_charger/gt2871turbo-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/gt2871turbo_6-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/gt2871turbo_5-650x436.jpg

http://www.godspeedproject.com/image/cache/data/turbo_charger/gt2871turbo_4-650x436.jpg

$310 Shipped within inner 48 states (Clocking adapters might be needed depending on previous turbo set up)



This deal is on available through Chris @ Godspeed Project. Email him at [email protected] or give him a call at 1 (626) 442 3988 and mention this Zilvia ad.

[Exas Spec D]

For the GT2871R, does it have journal bearings?

[jamg]

I believe it uses a wet float bearing?

Is it from JMTurbo?

[Fatboy Garage]

It's a wet float/journal bearing turbo.

[TheRealSy90]

The 18/20g are journal bearing also correct? I've always wanted to try an sr20 with a 20g...

[jamg]

1 year warranty?

[Fatboy Garage]

The 18/20g are journal bearing also correct? I've always wanted to try an sr20 with a 20g...

Yes! Both Journal bearing!

[Fatboy Garage]

1 year warranty?

Yes! One Year Warranty no questions asked, as long as invoice is kept and turbo is installed by an ASE mechanic.

[Fatboy Garage]

bump for these turbos! EVERYONE is running this!!!

[Fatboy Garage]

bump for 2871 and 18g! Ran by many Pro-AM drivers!

[Fatboy Garage]

bump for the direct bolt on turbos!

[integramandj]

just gotta sell my turbo and i maybe picking up a gt28

[Fatboy Garage]

Cool! let us know! :D

[integramandj]

is the gt28 for top mount

[Fatboy Garage]

The GT28 is meant for a bottom mount but the housing is clockable to where you can use it as a top mount.

[DJ PoW]

bump for the 18g! i ran that turbo back in the day on 18 psi. what an awesome turbo, here is a video of it on a KA24DE!

https://www.youtube.com/watch?v=gSCBJjz3Ars

[Fatboy Garage]

bump for the best bang for your buck turbo!

[Fatboy Garage]

these are the most popular turbos out there for the SR20/KA24/CA18 or even Miata!

[Fatboy Garage]

Columbus day bump!!!

[Fatboy Garage]

bump for bolt on turbos. 300hp all day on SR and KA!!!

[Fatboy Garage]

Cheapest and fastest way to make power!!!

[Most Wanted]

How much for the gt28 picked up?

[Fatboy Garage]

Pmed!!!!!!!!!!

[Fatboy Garage]

Almost Christmas Monday Bump!

[Fatboy Garage]

bump for these turbos!!!

[integramandj]

Just ordered

Sent from my SAMSUNG-SGH-I337 using Tapatalk

[integramandj]

Received turbo today all is well thanx can't wait to get this thing up and running

Sent from my SAMSUNG-SGH-I337 using Tapatalk