View Full Version : VA RB20 full swap!
OhSnapS14
07-26-2013, 07:08 PM
RB20DET SWAP
when running it would hold 22lbs of boost all day..
engine rebuilt.
exhaust mani t3 flange
mishimoto tstat
Greddy timing belt nissan OEM gasket kit (head, intake, exhaust etc,.)
arp head studs,
supertech pistons overbore .08 i think.. its not much. ,
brand new (non referb) starter,
brand new OEM waterpump (literally driven with it once.)
750cc deatch works injectors
Nistune ECU (needs to be tuned for injector size)
ngk spark plugs except 1 is ac delco (all they had in stock when i needed it)
a custom side intake manifold,
custom painted blue/w gold center (holes drilled to help release heat)
Brand new clutch Spec 3+ (less than 200 miles)
redone transmission, 0 grinds.
the bad. Harness is messed up somehow in the wiring.
3k. or most reasonable offer. no trades need CA$H
everything listed is apart of what you get with the swap.
dont waste my time. serious inquiries only thank you.
http://i473.photobucket.com/albums/rr91/Gixxin/20130423_093355_zps41ecaf08.jpg (http://s473.photobucket.com/user/Gixxin/media/20130423_093355_zps41ecaf08.jpg.html)
2seven6-60eight-47three5 txt anytime.
supersayianjim
07-26-2013, 08:16 PM
tits on that intake mani, you should post more pics of it.
OhSnapS14
07-26-2013, 11:24 PM
hahah ill take some more tomorrow.
OhSnapS14
07-30-2013, 04:30 PM
completely forgot...but still is someone gunna buy this thing or am i just going to have to part everything out?!
OhSnapS14
08-08-2013, 06:06 PM
2500....you cant build this engine for that.
soundboy
08-08-2013, 06:16 PM
Nice rb
Sent from my GT-P3110 using Tapatalk 4
feito
08-08-2013, 06:20 PM
what turbo did u have on it that was boosting 22 lb and is it included?
OhSnapS14
08-08-2013, 06:23 PM
turbo isnt included i have an updated list of everything that it comes with along with more photos. the turbo was a Holset H1c but it is sold now.
OhSnapS14
08-08-2013, 06:27 PM
when running it would hold 22lbs of boost all day..
engine rebuilt. approx 15k
exhaust mani t3 flange
brand new Greddy
Greddy timing belt nissan OEM gasket kit (head, intake, exhaust etc,.)
arp head studs,
supertech pistons overbore .08 i think.. its not much. ,
brand new (non referb) starter,
brand new OEM water pump (literally driven with it once.)
750cc deatch works injectors
Nistune ECU (needs to be tuned for injector size)
ngk spark plugs except 1 is ac delco (all they had in stock when i needed it)
a custom side intake manifold,
grand national wasted spark coil pack set up
extra grand national coil pack NIB
extra Cometic Metal HG
Custom Catch Can w/ steel braided hoses
Power steering pump and reservoir.
Z32 MAF
extra ignitor
extra CAS sensor
Steel Braided fuel hoses.
S14 motor/trans mounts
custom painted blue/w gold center (holes drilled to help release heat)
Brand new clutch Spec 3+ (less than 200 miles)
0 grinds on transmission w/slave cyl
the bad. Harness is messed up somehow in the wiring. was told by JGY it was a short.
OhSnapS14
08-08-2013, 06:35 PM
http://i473.photobucket.com/albums/rr91/Gixxin/20130802_201531_zps0cad7ad7.jpg (http://s473.photobucket.com/user/Gixxin/media/20130802_201531_zps0cad7ad7.jpg.html)
http://i473.photobucket.com/albums/rr91/Gixxin/20130802_201952_zps07af5e15.jpg (http://s473.photobucket.com/user/Gixxin/media/20130802_201952_zps07af5e15.jpg.html)
http://i473.photobucket.com/albums/rr91/Gixxin/20130802_201634_zpscba88d5c.jpg (http://s473.photobucket.com/user/Gixxin/media/20130802_201634_zpscba88d5c.jpg.html)
http://i473.photobucket.com/albums/rr91/Gixxin/20130803_114138_zpsd29f6c88.jpg (http://s473.photobucket.com/user/Gixxin/media/20130803_114138_zpsd29f6c88.jpg.html)
OhSnapS14
08-09-2013, 01:03 PM
Bumpageeeeee
OhSnapS14
08-10-2013, 09:03 PM
everyone wants something for nothing. throwing in the holset H1C with it modified to fit IC hoses easier......
Tkoppab
08-19-2013, 02:00 AM
Im looking for an intake mani. Any tips on where you got yours?
laocivic
08-20-2013, 06:25 AM
ready for part out lol. i want the catch can setup and fuel rail, fpr setup
fearlessKouki
08-20-2013, 09:04 AM
im interested in the ecu if u end up parting out!
OhSnapS14
08-20-2013, 05:32 PM
im interested in the ecu if u end up parting out!
make me an offer. it looks like its going to part.
OhSnapS14
08-21-2013, 10:23 PM
2300...thats practically giving away everything... and im losing a fortune, hope you all are satisfied.
louie661
08-21-2013, 11:46 PM
im interested in the custom intake...pm me price if you part it out.thanks
OhSnapS14
08-22-2013, 12:57 AM
everything is no longer for sale now, engine wouldnt part all the way. been trying to sell parts for a month now. sorry peeps... DELETE THIS THREAD
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.