View Full Version : 95 240sx over heated now won't start..
Galaxy _S14
07-26-2013, 12:20 PM
On my way to work My radiator hose busted. It over heated bas before I could cut it off. Replaced hose filled with water and it turns over try to start but keeps cutting out.. Water in the exhaust but none in the oil? I noticed alot of steam coming from the intake... Intake gasket maybe.. Any help would be appreciated
Sent from my SPH-D710BST using Tapatalk 2
Rich260z
07-26-2013, 01:04 PM
Blown headgasket, you probably don't have any compression, or coolant is leaking everywhere in the engine
Galaxy _S14
07-26-2013, 01:07 PM
I checked the compression good across all cylinders
Sent from my SPH-D710BST using Tapatalk 2
zombiewolf513
07-26-2013, 03:04 PM
Have you reset the ecu? I overheated once for about 10 seconds, never ran right again, turned out to be the ecu
Galaxy _S14
07-26-2013, 03:36 PM
No but it ran half assed for about a mile let of the gas n died.. Turned it over with out the plugs shot water out of the cylinders.. I just took the intake off (a bitch) The gasket broke in 4 places n the intake tunnels are soaked.. On 4 and 2. I don't think the head gasket blew
Sent from my SPH-D710BST using Tapatalk 2
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.