View Full Version : White Bunny problems!!!!!!!!
panda240_4life
07-17-2013, 09:18 AM
I just got a 5-speed from a friend to do the conversion from auto. He gave me everything for a white bunny set up as well. However, when i put it all together it would let me put it in gear. No grinding or anything. It just wouldnt let me almost like something was stopping it. Adjusted the pedal and bled the SH*T out of the line but still nothing PLZ HELP!!!!!!!!!!!!!
Croustibat
07-17-2013, 02:19 PM
maybe the disc is mounted the wrong way ? i dont know, your question is very vague.
MrSanchez925
07-17-2013, 02:22 PM
sounds like you installed the clutch wrong.
lbogkush
07-17-2013, 02:50 PM
is the fork put on right
panda240_4life
07-18-2013, 03:05 PM
Ok, so i got it running but now the reverse lights and the speedometer doesnt work. plz help
panda240_4life
07-18-2013, 03:06 PM
Turns out the throw out bearing was bad so now it running but like i said^^^ speedo and reverse lights dont work...need help
....did you connect the wires?
panda240_4life
07-18-2013, 03:24 PM
^^^Yes i tripple checked the and they ARE connected, they arent pinched but still nothing.
Swap out the speed sensor for a known good one from a buddy or someone you know. See if that helps...
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.