venom2034
07-14-2013, 06:49 PM
Bought a new long block that had better internals so I have the spare parts to sell from my previous setup. I had this setup since January so about 5,000 miles was put on the parts. Looking for $210 shipped for both the head stud kit and head gasket. It has been torqued down once when it was originally built. The head gasket is 87mm bore and 1.1 thickness. I'll split both if need be.
Also have a head that was rebuilt to oem spec at a Local shop in NYC called Westchester Crank. It has new valve guides and Seals. I reused the springs and the valves because it was still in good shape. Will include everything internally to make it a complete functioning head (cams, caps, hardware, etc. I Have the receipt from the work performed at the shop available upon request. $350 shipped. Everything posted is from an s13 redtop sr.
Also have a head that was rebuilt to oem spec at a Local shop in NYC called Westchester Crank. It has new valve guides and Seals. I reused the springs and the valves because it was still in good shape. Will include everything internally to make it a complete functioning head (cams, caps, hardware, etc. I Have the receipt from the work performed at the shop available upon request. $350 shipped. Everything posted is from an s13 redtop sr.