Broadfield
07-12-2013, 09:06 PM
http://images46.fotki.com/v147/photos/4/47612/220584/IMG_2125-vi.jpg
Fits LHD and RHD S13's
Main plate is CNC'd from 1/8" aluminum
Inside radius of the gauge openings are beveled so the gauge will drop in when angled
ABS angled rings are prepped to remove all casting nubs
ABS angled rings are trued on the bottom side as they do not come 100% flat
Main plate and rings are texture coated for OEM look
Painted with high quality SEM Satin Black
Angled plates Include aluminum mounting brackets that can be modified to fit your particular gauge(see pics below)
The mounts can also be modified to make a rock solid mounting system for the dash(see pics below)
I will update stock levels as they increase/decrease
NOTE: All prices include shipping to anywhere in the continental United States. If you are located somewhere else please ask for a shipping quote.
Item: 352A (3) 52mm Angled Gauge Plate: $75 Shipped 9 in stock... will go fast!
http://images108.fotki.com/v613/photos/2/47612/9700254/IMG_8713-vi.jpg
All Angled Gauge Setups Include Universal Brackets:
http://images42.fotki.com/v664/photos/2/47612/9700254/IMG_8729-vi.jpg
The brackets can be cut/modified to accommodate virtually any gauge. This will ensure the gauges do not budge when mounted in the plate. On top of that, the mounting bracket gives you the ability to also make a mounting system to hold the plate to the dash. You can simply tap out the center of the bracket and use some threaded rod to make a rock solid mounting system. I like to cut some aluminum strips to make "washers" and then some simple wing nuts to fasten it in the dash. The wing nuts make it simple to fasten while the dash is still in the car. You can find examples of the modified brackets and mounting system below. Note: I do not sell the mounting system, as it can vary depending on the brand and model of gauge. So I leave that to the consumer if they so choose.
Example of Modified Bracket:
http://images20.fotki.com/v355/photos/2/47612/9700254/IMG_1972-vi.jpg
Example of Modified Brackets Mounted:
http://images108.fotki.com/v191/photos/2/47612/9700254/IMG_1976-vi.jpg
Example of Mounting System Utilizing Modified Mounting Brackets, Threaded Rod, "Washers" and Wing Nuts:
http://images49.fotki.com/v629/photos/2/47612/9704802/IMG_4362-vi.jpg
http://images16.fotki.com/v369/photos/4/47612/220584/IMG_2234-vi.jpg
Two each of "BROADFIELD CUSTOMS" and "BUTTFIELD CUSTOMS" stickers now included with every order. My friends call me Buttfield incase you are wondering why. Run them on your car, on your toolbox, hand them out to homeless people... I don't care. Hell, if you can sell them to your dumb friend, then more power to ya!
http://images54.fotki.com/v627/photos/4/47612/220584/IMG_0927-vi.jpg
Fits LHD and RHD S13's
Main plate is CNC'd from 1/8" aluminum
Inside radius of the gauge openings are beveled so the gauge will drop in when angled
ABS angled rings are prepped to remove all casting nubs
ABS angled rings are trued on the bottom side as they do not come 100% flat
Main plate and rings are texture coated for OEM look
Painted with high quality SEM Satin Black
Angled plates Include aluminum mounting brackets that can be modified to fit your particular gauge(see pics below)
The mounts can also be modified to make a rock solid mounting system for the dash(see pics below)
I will update stock levels as they increase/decrease
NOTE: All prices include shipping to anywhere in the continental United States. If you are located somewhere else please ask for a shipping quote.
Item: 352A (3) 52mm Angled Gauge Plate: $75 Shipped 9 in stock... will go fast!
http://images108.fotki.com/v613/photos/2/47612/9700254/IMG_8713-vi.jpg
All Angled Gauge Setups Include Universal Brackets:
http://images42.fotki.com/v664/photos/2/47612/9700254/IMG_8729-vi.jpg
The brackets can be cut/modified to accommodate virtually any gauge. This will ensure the gauges do not budge when mounted in the plate. On top of that, the mounting bracket gives you the ability to also make a mounting system to hold the plate to the dash. You can simply tap out the center of the bracket and use some threaded rod to make a rock solid mounting system. I like to cut some aluminum strips to make "washers" and then some simple wing nuts to fasten it in the dash. The wing nuts make it simple to fasten while the dash is still in the car. You can find examples of the modified brackets and mounting system below. Note: I do not sell the mounting system, as it can vary depending on the brand and model of gauge. So I leave that to the consumer if they so choose.
Example of Modified Bracket:
http://images20.fotki.com/v355/photos/2/47612/9700254/IMG_1972-vi.jpg
Example of Modified Brackets Mounted:
http://images108.fotki.com/v191/photos/2/47612/9700254/IMG_1976-vi.jpg
Example of Mounting System Utilizing Modified Mounting Brackets, Threaded Rod, "Washers" and Wing Nuts:
http://images49.fotki.com/v629/photos/2/47612/9704802/IMG_4362-vi.jpg
http://images16.fotki.com/v369/photos/4/47612/220584/IMG_2234-vi.jpg
Two each of "BROADFIELD CUSTOMS" and "BUTTFIELD CUSTOMS" stickers now included with every order. My friends call me Buttfield incase you are wondering why. Run them on your car, on your toolbox, hand them out to homeless people... I don't care. Hell, if you can sell them to your dumb friend, then more power to ya!
http://images54.fotki.com/v627/photos/4/47612/220584/IMG_0927-vi.jpg