s13 drifting on a budget

[LJBS13]

I decided to document my build from the point that i'm at now. I've had this car for almost 4 years now and its in the middle of having its 3rd motor swap.
1992 240sx fastback
current motor going in is an rb25det series 2 that I bought from my good friend who purchased it on a clip from J&R out in El Monte. motor is completely stock and I intend to keep it that way for a period of time and slowly build more reliable power.
my main goal with this swap was reliability. I don't want to be the guy at the track overheating, dripping oil, or having any b.s issues. so I purchased a few goodies, oem Nissan parts.
For people out there wondering why I am swapping an rb25 and not just building my SR my answer is that Im going for more reliable power. im not looking to go over 300hp for the time being but when I do I know that the RB Motor has the potential to hold it with minor upgrades and stock internals.
ill update with pics and details a little bit later. enjoy

photos of my car leading up to its current setup. and a little bit of history from when I first got it back in 09

this is the first set up I put together. enkei 92's, TC Sportline coils, unknown skirts and valences, original ka24de, and that's about it
http://imageshack.us/a/img826/2408/3l0a.jpg
Kinda miss it like this sometimes
http://imageshack.us/a/img855/3367/iec.jpg

After the Ka gave out from constant abuse, I purchased an Sr20 Motorset and threw it in. mid 2010

Fall 2010 drifting with my buddy..not a good pic of him
http://imageshack.us/a/img337/6148/22574720818815922155210.jpg
I was loving the extra power that the sr20 had compared to drifting my ka.
http://imageshack.us/a/img29/358/s4h4.jpg

I got board of 15's and burning through tires fast so I decided to try a new look and purchased some 17's Mustang reps to be exact and painted them. this was sometime in 2011
http://imageshack.us/a/img23/7485/frb0.jpg

I thought this pic was cool. my car was extremely filthy after this and I still find dirt in those hard to reach areas.
http://imageshack.us/a/img713/7294/ozob.jpg

After snapping extended studs on my 4 lug setup and having my rear wheel fly off after initiating one night at orange show, I decided to go 5 lug and bought some varrstoens. soon after I got them, I noticed they were getting popular so i sold them and picked up something more my style. polished rims with a nice step lip. I also decided to run a bn sports replica kit which I waited at least 6 months to get at the time
This pic was around fall 2012
http://imageshack.us/a/img109/291/ry0y.jpg

now on to 2013
Heres the car with my current rims. 17x9.5 +6 up front -6 out back I also installed my autopower 6 point bolt in cage
http://imageshack.us/a/img268/9936/26cq.jpg

Also I did a little upgrade to the SR. installed an auto s15 T28 and Megan manifold
http://imageshack.us/a/img191/2585/ac1v.jpg

Car felt real nice with that t28
http://imageshack.us/a/img23/6233/u2a9.jpg

I inherited some over fenders from a buddy for free and decided to throw them on. I wish I would have taken the time to overlap and weld the flap shut instead of filling the hole with great stuff because the car is noticeably louder now.

http://imageshack.us/a/img163/1449/rhek.jpg
http://imageshack.us/a/img194/7410/tqt5.jpg



I really enjoy driving my car around everywhere so after almost destroying my bumper a few times and scraping every bump in the road I decided to go with a cleaner more simple look that will attract less attention..hopefully
I went with type x aero
http://imageshack.us/a/img11/230/h95a.jpg
My DD S14 and my S13
http://imageshack.us/a/img607/2562/zs8p.jpg
This is basically how the car sits currently
http://imageshack.us/a/img545/234/sam0970v.jpg

http://imageshack.us/a/img593/678/sam0968t.jpg

I do plan on in the near future lining all the body panels and aero up, getting it painted and getting a damn hood. im on the look out for a dmaxx or dmaxx rep.

ANYWHO ON TO THE SWAP!

My 6 Bolt Front end removal
http://imageshack.us/a/img534/564/0bcb.jpg

bye bye sr20
http://imageshack.us/a/img29/8139/20130526132251.jpg
My buddy helping me out
http://imageshack.us/a/img703/9320/j1g2.jpg

[LJBS13]

Heres the motor when I first got it. my friend did a good job of pulling it out of the clip and stripping the majority of parts before I picked it up
http://imageshack.us/a/img163/1559/0rpq.jpg

I got the majority of parts already im a little late on posting so it will be a big update when I get the pics and info up.

[LJBS13]

got the valve covers pulled off, cleaned up, and started to paint them today. I went with a metallic grey. they are almost done just letting the last coat cure then im going to hit them with some gloss.

Before the cleaning
http://imageshack.us/a/img534/6708/6zro.jpg (http://imageshack.us/photo/my-images/534/6zro.jpg/)

Starting to primer
http://imageshack.us/a/img20/3191/s2si.jpg (http://imageshack.us/photo/my-images/20/s2si.jpg/)

Here is a good amount of the parts I am replacing.
-Front and Rear main seal.
-shifter bushing
-exhaust and intake manifold gaskets
-circuit sport steel braided turbo lines
-NGK bcpr6es-11's
-Valve cover gaskets with new half moons.
-oem water pump
-SYKO performance motor mount kit that comes with the 3 inch turbo elbow.
I also bought a new exh. manifold stud because there was one that was snapped of in the head. and a few other little oil gaskets.
- I also went with a steel 1 piece driveshaft from The Driveshaft Shop. I am now waiting on my isis Freddy to arrive from Aceup Motorsports they had the best pricing on the isis manifold and I've had a good experience ordering from them in the past.

http://imageshack.us/a/img580/5058/x0ij.jpg

[WristWork]

I like where this is going

[Mustache240]

haha fuck i remember seeing this thing at orange show with the wheel broken off!

[ayrtonlucyk]

type x ftw, subscribed!

[LJBS13]

thanks guys.
so valve covers are done. I think they came out pretty nice
http://imageshack.us/a/img4/6431/o7t2.jpg
http://imageshack.us/a/img832/8293/s6ou.jpg

I also cleaned up the water pump area and installed my new pump.
http://imageshack.us/a/img834/2173/pmi6.jpg
http://imageshack.us/a/img577/2080/54q2.jpg


I used the double nut method to install my studs
http://imageshack.us/a/img689/8673/ae4e.jpg

I also cleaned up the intake ports. there was a build up of what looked to be dried up oil. this is the worst one
http://imageshack.us/a/img5/8108/bb3y.jpg
http://imageshack.us/a/img5/70/rsm2.jpg

and after the cleaning
http://imageshack.us/a/img15/7936/86gc.jpg
http://imageshack.us/a/img843/5826/jldr.jpg

on the exhaust side I had a snapped stud. I also had a snapped stud on my daily s14 in the same spot so I decided to do the removal myself. I followed this thread http://zilvia.net/f/tech-talk/120408-how-diy-remove-broken-manifold-studs.html
posted by JAMISON182. I went out and purchased all the right tools needed and took my time. and it was well worth it on the RB I barley had to start turning the extractor and the stud came out like butter. on the s14 it was a little more of a struggle because the motor was still in the vehicle so I had to do some maneuvering to get it right but I got it out. here's a pic of the RB.
http://imageshack.us/a/img19/9752/1ak2.jpg

I also half ass painted the engine bay. I initially wasn't going to because I'm not really going for a show car but the bay was surface rusting in some areas and the paint looked pretty terrible. so 2 cans later and 1 can of gloss this was the result. I still have to clean off the overspray with namptha
http://imageshack.us/a/img842/2524/296z.jpg

[Krusty_s13]

looking good. keep it up

[LJBS13]

I got a little work done over the weekend. I wanted to get the turbo on and start putting the front of the motor back together. I forgot to take some pics while I took the turbo apart, but I at least have a before and after photo.
The crusty turbo before cleaning and painting.
http://imageshack.us/a/img707/6800/gxgr.jpg

I started fitting all the steel braided lines and Teflon taped the coolant lines just to be safe.
http://imageshack.us/a/img4/9128/ueie.jpg

I also replaced the front main seal. very easy job, it popped right out with a flathead. and I installed the new one with a deep socket and a hammer by gently tapping it into place.
here is the old one
http://imageshack.us/a/img585/8627/krze.jpg
I was in a little bit of a hurry putting things together so i didn't take as many step by step pictures as I would have liked, but oh well here is the front with the new timing belt installed, water pump and a decent cleaning job. I wanted to do the complete timing belt replacement with the idler, tensioner, and spring but everyone is on back order with no exact date of arrival. So I decided to just wait on it and have it shipped to me when NissanPartsCC get them in. my idler and tensioner seem to be in good shape nonetheless & the bearings feel very healthy so I should be ok.
The turbo is all mounted up now as well.

http://img4.imageshack.us/img4/7520/7t3n.jpg (http://imageshack.us/photo/my-images/4/7t3n.jpg/)

http://imageshack.us/a/img542/8603/axjl.jpg

[Reece]

Fantastic build so far!

[MR_GUTTI]

Me like it !! Subscribed !!!

[LJBS13]

Intake manifold came in today.

[jesse_s13]

Cool build. Car looks alot better now than before IMO also diggin the wheels

[CLM_s13Type-x]

looking awesome keep it up!