onevia drift
07-07-2013, 04:02 PM
First off, I'm new to Sr's and at the moment I'm tired of trying to make ends meet. I just bought a house and I have no will to finish assembling this motor due to fan boys thinking their parts are made of fucking diamonds.... So, I'm looking to trade for another motor/swap.
Contact info
Jake Shaw
Fresno CA
TEXT PREFERRED!!!! 559-916-7055
I can ship at a VERY reasonable price through my work AT BUYERS EXPENSE.
I WILL sell outright for $1250 and a can of Copenhagen
I WILL NOT part it out unless I have a buyer for everything.
Ok, so I bought this motor as a longblock from a fellow member on here about a month~ish ago. I bought it as a builder since my blacktop was just bad news. I was told that it needed a new oil pump. Reason being is because it was compression tested with a full pan of oil and there wasn't any oil reaching the head. THE MOTOR WAS NEVER RAN/CRANKED AFTER THAT!!. I tore the pan off and checked for any debris, shavings, anything metallic at all and came up with nothing. I checked all the cyl walls and they all look awesome. Since then, I replaced the timing cover with oil pump and spun the motor again.. I got good oil flow.
Since then, I've been slowing buying parts to complete the motor and I'm just getting sick of spending money for stuff that's not worth it IMO.
INCLUDED:
-redtop motor/longblock (unknown mileage)
-Alternator
-Harness
-Trans/bellhousing bolts
-E6 ecu
-8 coil packs
-Coil pack harness
-Ignitor
-good oem clutch
-oem flywheel
-2 upper and lower oil pans
-2 intake manifolds with IACV (1 blacktop, 1 redtop)
-CAS
-OEM gasket set (felpro I believe)
-1 set (4) blacktop rods/pistons
-oem turbo mani
-fuel rail
-valve cover
-2 sets of valve cover nuts/gromets/washers
-1 extra timing cover with said bad oil pump
-2 main/crank pullies
-1 extra girdle
Whats missing:
-turbo
-turbo lines
-injectors
-starter
-trans
-fpr
-trans dust shield fling a ding thing
-dump pipe
-awesomeness
This is the only pic i have at the moment. I can get more in a few hours.
Oh... my buddy thinks it's the coolest thing ever.... Hence the expression. LMAO
http://i216.photobucket.com/albums/cc86/SRni-ju/CAM00054-1_zpsdfd239c4.jpg (http://s216.photobucket.com/user/SRni-ju/media/CAM00054-1_zpsdfd239c4.jpg.html)
Contact info
Jake Shaw
Fresno CA
TEXT PREFERRED!!!! 559-916-7055
I can ship at a VERY reasonable price through my work AT BUYERS EXPENSE.
I WILL sell outright for $1250 and a can of Copenhagen
I WILL NOT part it out unless I have a buyer for everything.
Ok, so I bought this motor as a longblock from a fellow member on here about a month~ish ago. I bought it as a builder since my blacktop was just bad news. I was told that it needed a new oil pump. Reason being is because it was compression tested with a full pan of oil and there wasn't any oil reaching the head. THE MOTOR WAS NEVER RAN/CRANKED AFTER THAT!!. I tore the pan off and checked for any debris, shavings, anything metallic at all and came up with nothing. I checked all the cyl walls and they all look awesome. Since then, I replaced the timing cover with oil pump and spun the motor again.. I got good oil flow.
Since then, I've been slowing buying parts to complete the motor and I'm just getting sick of spending money for stuff that's not worth it IMO.
INCLUDED:
-redtop motor/longblock (unknown mileage)
-Alternator
-Harness
-Trans/bellhousing bolts
-E6 ecu
-8 coil packs
-Coil pack harness
-Ignitor
-good oem clutch
-oem flywheel
-2 upper and lower oil pans
-2 intake manifolds with IACV (1 blacktop, 1 redtop)
-CAS
-OEM gasket set (felpro I believe)
-1 set (4) blacktop rods/pistons
-oem turbo mani
-fuel rail
-valve cover
-2 sets of valve cover nuts/gromets/washers
-1 extra timing cover with said bad oil pump
-2 main/crank pullies
-1 extra girdle
Whats missing:
-turbo
-turbo lines
-injectors
-starter
-trans
-fpr
-trans dust shield fling a ding thing
-dump pipe
-awesomeness
This is the only pic i have at the moment. I can get more in a few hours.
Oh... my buddy thinks it's the coolest thing ever.... Hence the expression. LMAO
http://i216.photobucket.com/albums/cc86/SRni-ju/CAM00054-1_zpsdfd239c4.jpg (http://s216.photobucket.com/user/SRni-ju/media/CAM00054-1_zpsdfd239c4.jpg.html)