driftimage
07-04-2013, 02:51 PM
I need to get rid of my 1989 Nissan 240sx shell. This car is clean title. The frame is not bent, twisted, or crashed. I am the 2nd registered owner which I bought of a lady. After I bought the car I stripped it the next day so the car hasn't seen the streets ever since.
MUST READ. Details of car of what I took out and what's missing:
Since this was my unfinished project with no intensions of selling it I swapped a lot of parts and threw away the old nasty OEM ones so please read.
MISSING:
-Sway bars F&R
-Tension Rods
-RUCAS (still rolls)
-Exhaust
-Differential and Axles (I have, just not Installed)
-Driver seat
-Motor and Trans
BUT I THINK THIS IS THE MOST IMPORTANT THING TO KNOW THAT WAY THERE IS NO SURPISES. I DONT WANT YOU TO WASTE MY TIME THEREFORE I WONT WASTE YOURS. SINCE I HAD THE FLCAS EXTENDED I HAD TEIN INNER AND OUTER TIE RODS WITH SPACERS SO THE FRONT SETUP WAS BITCHING. OH AND A REBUILT RACK (MORE CAMBER AND MORE ANGLE THAN STOCK)
ON MY FIRST ATTEMPT TO SELL THIS SHELL I SWAPPED EVRYTHING FAST DUE TO SOME ASSHOLE PRESSURING ME TO GET THE CAR READY FUCKER ENDED UP FLAKING. BY SWAPPING I MEAN I SWAPPED TO A DIFFERENT RACK WITH STOCK TIE RODS. TURNING EVERYTHING BACK TO STOCK AS POSSIBBLE SINCE THE GUY DIDNT WANT TO PAY ALOT.
I WAS SUCH IN A RUSH WITH LITTLE TIME DUE TO WORK I DIDNT MEASURE THE RACK CAUSING FRONT TOE TO BE WAY OFF MAKING IT HARD TO ROLL. I DISCONECTED RIGHT OUTER TIE ROD FROM KNUCKLE SO IT WOULD BE EASIER. LEFT WHEEL WILL BE CONTROLLED BY STEERING WHEEL BUT RIGHT WONT. I DONT HAVE TIME TO RE ALIGN EVERYTHING.
SPECS:
-1989 Nissan 240sx Hatch
-Auto shell
-Clean Title
-Registered as Non-Op
-Title in hand
-New SPL Sub Frame Bushings
-Extended Front Lower Control Arms w/ New
Energy Suspension Bushings. *FLCAs are almost
as long as s14 LCAs if not a little bit longer. For more
front Camber
LOCATION:
-Rosemead, CA 91770
CONTACT:
MANNY 562.373.880FIVE
Asking $500 OBO NO LOW BALLERS
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_142414_zps49cf5a01.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_142414_zps49cf5a01.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_130559_zps3c105f18.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_130559_zps3c105f18.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_130539_zpsc408388f.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_130539_zpsc408388f.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113500_zpsa0b5bb83.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113500_zpsa0b5bb83.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113452_zps88fde1c9.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113452_zps88fde1c9.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113334_zps31669d65.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113334_zps31669d65.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113413_zps02d584ae.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113413_zps02d584ae.jpg.html)
MUST READ. Details of car of what I took out and what's missing:
Since this was my unfinished project with no intensions of selling it I swapped a lot of parts and threw away the old nasty OEM ones so please read.
MISSING:
-Sway bars F&R
-Tension Rods
-RUCAS (still rolls)
-Exhaust
-Differential and Axles (I have, just not Installed)
-Driver seat
-Motor and Trans
BUT I THINK THIS IS THE MOST IMPORTANT THING TO KNOW THAT WAY THERE IS NO SURPISES. I DONT WANT YOU TO WASTE MY TIME THEREFORE I WONT WASTE YOURS. SINCE I HAD THE FLCAS EXTENDED I HAD TEIN INNER AND OUTER TIE RODS WITH SPACERS SO THE FRONT SETUP WAS BITCHING. OH AND A REBUILT RACK (MORE CAMBER AND MORE ANGLE THAN STOCK)
ON MY FIRST ATTEMPT TO SELL THIS SHELL I SWAPPED EVRYTHING FAST DUE TO SOME ASSHOLE PRESSURING ME TO GET THE CAR READY FUCKER ENDED UP FLAKING. BY SWAPPING I MEAN I SWAPPED TO A DIFFERENT RACK WITH STOCK TIE RODS. TURNING EVERYTHING BACK TO STOCK AS POSSIBBLE SINCE THE GUY DIDNT WANT TO PAY ALOT.
I WAS SUCH IN A RUSH WITH LITTLE TIME DUE TO WORK I DIDNT MEASURE THE RACK CAUSING FRONT TOE TO BE WAY OFF MAKING IT HARD TO ROLL. I DISCONECTED RIGHT OUTER TIE ROD FROM KNUCKLE SO IT WOULD BE EASIER. LEFT WHEEL WILL BE CONTROLLED BY STEERING WHEEL BUT RIGHT WONT. I DONT HAVE TIME TO RE ALIGN EVERYTHING.
SPECS:
-1989 Nissan 240sx Hatch
-Auto shell
-Clean Title
-Registered as Non-Op
-Title in hand
-New SPL Sub Frame Bushings
-Extended Front Lower Control Arms w/ New
Energy Suspension Bushings. *FLCAs are almost
as long as s14 LCAs if not a little bit longer. For more
front Camber
LOCATION:
-Rosemead, CA 91770
CONTACT:
MANNY 562.373.880FIVE
Asking $500 OBO NO LOW BALLERS
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_142414_zps49cf5a01.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_142414_zps49cf5a01.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_130559_zps3c105f18.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_130559_zps3c105f18.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_130539_zpsc408388f.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_130539_zpsc408388f.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113500_zpsa0b5bb83.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113500_zpsa0b5bb83.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113452_zps88fde1c9.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113452_zps88fde1c9.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113334_zps31669d65.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113334_zps31669d65.jpg.html)
http://i214.photobucket.com/albums/cc214/emmanuelevo16/th_20130606_113413_zps02d584ae.jpg (http://s214.photobucket.com/user/emmanuelevo16/media/20130606_113413_zps02d584ae.jpg.html)