JDS Performance
06-29-2013, 04:36 PM
BHJ Products R model SR20DET SR20DE Torque Plate for rent:
$100.00 for 7 day rental plus shipping - then $20.00 a day after
also a $500.00 deposit - which will be refunded after the plate is returned in orignal condition - these sell for around $600.00
It is good for stock up to 0.060" over bore
Stock bore on the SR is 86mm - this plate is good for up to 87.5mm
This plate is good to be used with stock head bolts or aftermarket studs (read instructions)
This plate is used to act as the head while boring/honing the cylinders as well as gapping the piston rings for a perfect ring seal!
Most machine shops will not have these for the 4 cyl motors
If you were to not use this when boring/honing your block there is no way to get perfect ring seal
Be sure to read instructions below before you rent/use this plate
Contact me for avaliabilty
For 1 week rental you would Paypal me $600.00 plus shipping (ususally around $25.00 in the US which includes $600.00 insurance) - after the items are retuned in there orignal condition - no damage (cleaned as well) - you will be refunded from original Paypal payment $500.00
Email / Paypal is - [email protected] - send as a gift or add the 4% fee
I plan on getting a few made to my specs in the future - so if you would like to purchase one just let me know
__________________________________________________ __________________________________________________ _______________
General introduction:
http://www.bhjproduc...es/hp_intro.php
R model plates introduction:
http://www.bhjproduc...plates/hp_r.php
R Model Instruction:
Page Not Found: Redirecting To BHJ Products Home Page: BHJ Products, +1 (510)797-6780 (http://www.bhjproducts.com/bhj_downloads/instrux/hp/BHJ_HPInstrux_R).
http://i82.photobucket.com/albums/j274/joshds25/20121023_221424.jpg
http://i82.photobucket.com/albums/j274/joshds25/20121023_221500.jpg
$100.00 for 7 day rental plus shipping - then $20.00 a day after
also a $500.00 deposit - which will be refunded after the plate is returned in orignal condition - these sell for around $600.00
It is good for stock up to 0.060" over bore
Stock bore on the SR is 86mm - this plate is good for up to 87.5mm
This plate is good to be used with stock head bolts or aftermarket studs (read instructions)
This plate is used to act as the head while boring/honing the cylinders as well as gapping the piston rings for a perfect ring seal!
Most machine shops will not have these for the 4 cyl motors
If you were to not use this when boring/honing your block there is no way to get perfect ring seal
Be sure to read instructions below before you rent/use this plate
Contact me for avaliabilty
For 1 week rental you would Paypal me $600.00 plus shipping (ususally around $25.00 in the US which includes $600.00 insurance) - after the items are retuned in there orignal condition - no damage (cleaned as well) - you will be refunded from original Paypal payment $500.00
Email / Paypal is - [email protected] - send as a gift or add the 4% fee
I plan on getting a few made to my specs in the future - so if you would like to purchase one just let me know
__________________________________________________ __________________________________________________ _______________
General introduction:
http://www.bhjproduc...es/hp_intro.php
R model plates introduction:
http://www.bhjproduc...plates/hp_r.php
R Model Instruction:
Page Not Found: Redirecting To BHJ Products Home Page: BHJ Products, +1 (510)797-6780 (http://www.bhjproducts.com/bhj_downloads/instrux/hp/BHJ_HPInstrux_R).
http://i82.photobucket.com/albums/j274/joshds25/20121023_221424.jpg
http://i82.photobucket.com/albums/j274/joshds25/20121023_221500.jpg