Built BC s14 Sr20det Head and cams

[TEALSQUEAL]

I have a built S14 sr20det Head and cams. All BC items with moderate porting/matching.

The head is currently at the machine shop and will be picked later this week after being cleaned up and checked.

It has a full valvespring/retrainer kit from BC and also a 272 stage 3 cam kit.

It was finished just under 20k miles ago and ran without issue. VTC engaged properly and functioned without a hitch.

I have decided upon going VVL after going through a two motor builds simultaneously and realizing that what I needed was to spend the extra dimes on the VE swap.

the pictures are as follows. I can get the fresh from the machine shop pictures later this week. These pictures were taken friday the 21st when I dropped off my other items for my new build.

http://i162.photobucket.com/albums/t277/BULLITT04839/65550CDD-C5FF-4887-BBDA-E8DEBA55E328-4605-0000022C227093FF_zpsacbc3f55.jpg (http://s162.photobucket.com/user/BULLITT04839/media/65550CDD-C5FF-4887-BBDA-E8DEBA55E328-4605-0000022C227093FF_zpsacbc3f55.jpg.html)

http://i162.photobucket.com/albums/t277/BULLITT04839/EFB62938-79F9-471D-9167-2A30ABE88744-4605-0000022C2C88862C_zpsc5d4977a.jpg (http://s162.photobucket.com/user/BULLITT04839/media/EFB62938-79F9-471D-9167-2A30ABE88744-4605-0000022C2C88862C_zpsc5d4977a.jpg.html)

http://i162.photobucket.com/albums/t277/BULLITT04839/FA9A4C6B-5C5F-4846-9D47-A5C257CCF7C2-4605-0000022C3B33BE7F_zps9fae9d2c.jpg (http://s162.photobucket.com/user/BULLITT04839/media/FA9A4C6B-5C5F-4846-9D47-A5C257CCF7C2-4605-0000022C3B33BE7F_zps9fae9d2c.jpg.html)

http://i162.photobucket.com/albums/t277/BULLITT04839/C362D22A-A321-4702-8C25-E6972992CD80-4605-0000022C4256D911_zps77c5402c.jpg (http://s162.photobucket.com/user/BULLITT04839/media/C362D22A-A321-4702-8C25-E6972992CD80-4605-0000022C4256D911_zps77c5402c.jpg.html)

http://i162.photobucket.com/albums/t277/BULLITT04839/F9275C78-D4E0-452F-9502-2F6B6ADE7C2D-4605-0000022C4936E2FF_zps72037edf.jpg (http://s162.photobucket.com/user/BULLITT04839/media/F9275C78-D4E0-452F-9502-2F6B6ADE7C2D-4605-0000022C4936E2FF_zps72037edf.jpg.html)

http://i162.photobucket.com/albums/t277/BULLITT04839/D0F480E8-3D47-40D6-A155-27B933CA0DAC-4605-0000022C50BBCDEF_zps35a0f4e8.jpg (http://s162.photobucket.com/user/BULLITT04839/media/D0F480E8-3D47-40D6-A155-27B933CA0DAC-4605-0000022C50BBCDEF_zps35a0f4e8.jpg.html)

http://i162.photobucket.com/albums/t277/BULLITT04839/5C4BF755-9768-4C0D-B113-9D5FEE4C030D-4605-0000022C574942B5_zps319ea220.jpg (http://s162.photobucket.com/user/BULLITT04839/media/5C4BF755-9768-4C0D-B113-9D5FEE4C030D-4605-0000022C574942B5_zps319ea220.jpg.html)

I would like to get $640 shipped (updated price after machine shop cleaned and surfaced). I will ship this and be very careful with packaging etc. I would prefer shipped offers only.

Change your setup and open up your power range!

[TEALSQUEAL]

bump someone wants to save money and have a built head for their s14 swap! Shoot me offers and lets get the ball rolling.

[TEALSQUEAL]

Bump for offers I want to move this stuff!

[kleenS14]

you sir have a pm

[Sugoi_Style]

Best of luck with the sale, OP! Heard that the VE swap is the way to go. Glad to see another Kentuckian keeping the motor set Japanese in favor over a LSWhatever V8 !!

[NickIsAZero]

Hmmmmmm very interested, I'd like to see it once it comes back from the machine shop. Will it arrive to me assembled & ready to be bolted onto my block? Lifters, rockers, shims, etc...

[TEALSQUEAL]

It'll arrive with mild assembly as in you have to set the rockers and shims (they've been bagged by cylinder, and then check clearances after bolting down the cams. Aside from that its fairly novice assembly.

[NickIsAZero]

You'll be hearing from me soon!

[TEALSQUEAL]

Bump for money.

[NickIsAZero]

Was the head decked while it was at the machine shop? Any new pictures?

[TEALSQUEAL]

I'm picking it up this week. It wasn't decked, ill have new pictures when I pick it up. The pictures I have up are from the machine shop when I dropped it off to have it cleaned.

I was having cleaned for my reassembly. I found too good of a deal to pass up on a VVL swap that I already have a lot of parts for. Thus I'm selling the head.

[TEALSQUEAL]

Picked it up from the machine shop, resurfaced and cleaned. Ready to bolt on, install and roll out.

http://i162.photobucket.com/albums/t277/BULLITT04839/5A3A30B0-9344-4CF6-98D2-68987075E7D6-4122-000002455AA4A8A7_zps067773a6.jpg

http://i162.photobucket.com/albums/t277/BULLITT04839/B81FE3E8-7B5D-4EC3-8C9B-478AEE975A0A-4122-0000024562B3BE41_zps23206905.jpg

http://i162.photobucket.com/albums/t277/BULLITT04839/EA5EEEE6-5E77-4FE1-95AB-7537D55BA55E-4122-00000245688794D7_zps91b8e106.jpg

http://i162.photobucket.com/albums/t277/BULLITT04839/2201504D-657D-4254-AC0A-4748214268FD-4122-000002454E58D452_zpsa425d40c.jpg

With cleaning and resurfacing new price is $640 shipped +PayPal fees.

[TEALSQUEAL]

Bump for Sunday!

[NickIsAZero]

I'll be PayPal'ing you some money tomorrow!

[TEALSQUEAL]

Good deal lmk

[LuckyRPS13]

Bump for a good seller, bought many things from him locally.

[TEALSQUEAL]

SOLD! Please close