18" step lip barrels, 5 inch dish

[snags]

bought these off a member here but did not end up using them. these are in almost brand new shape and are beautiful. no scratches of any kind.
if you need more pictures or measurements let me know

for 18" wheel
5 inches of dish, 4.5" at the tire bead.
36 bolt holes
these have a rolled lip edge not an "L"

this listing is for the pair only
im looking for SOLD
thanks alot zilvia

http://i1117.photobucket.com/albums/k600/nagelk/DSC00752_zps8af35bba.jpg
http://i1117.photobucket.com/albums/k600/nagelk/DSC00753_zps51c329e1.jpg (http://s1117.photobucket.com/user/nagelk/media/DSC00753_zps51c329e1.jpg.html)
http://i1117.photobucket.com/albums/k600/nagelk/DSC00754_zps6398bd8c.jpg

[No 240.. No id]

why is it not 40 bolts? i'd be all over them

[JetS500]

why is it not 40 bolts? i'd be all over them

agreed. but glws @OP. someone could use these.

[snags]

thank you guys for the interest! They are for a work meister. but should work for any 36 bolt 18" with step lip

[DeleriousZ]

Are you sure those are 5"? aren't they usually measured from the inside of the lip where the tire bead seats?

[snags]

yes they are 5 inch from the tired bead to the outer edge

[JetS500]

Are you sure those are 5"? aren't they usually measured from the inside of the lip where the tire bead seats?

If you lookclosely at pic, @OP measured from end to end and it ws roughly 5.25"~ therefore from bead would be 5",. if not, extremely close.

[snags]

bump i still have these and i am taking offers! great upgrade for your 18" meisters!!!

[Thaiboy]

fuuuuu
Need 40 hole ones. :/

GLWS though. :)

[dawagarage]

these are 4.5" lips

[choleaoum]

^ they are 5's. look at the tape measure again. he measured from the edge which is ~5.25" almost.

give or take from the inner bead it's very close to 5" as someone here also stated earlier.

[dawagarage]

^ they are 5's. look at the tape measure again. he measured from the edge which is ~5.25" almost.

give or take from the inner bead it's very close to 5" as someone here also stated earlier.

i did look at the tape measure. the very most outer lip is .5", look at it again. so subtract that .5" from the total.

[StrawhatRR]

Going to agree that they are 4.5" lips.
You do not measure the lip edge when calculating width.

[snags]

i edited the description a bit. price drop to 375 shipped for minty minty replacement barrels

[dawagarage]

good deal for sure :)

[snags]

price drop again. i NEED these sold taking reasonable offers

[snags]

bump. taking any offer

[Vqd240z]

Not familiar with step lips and none step lips. My question is so this will make the rims a 19inch? Can someone explain to me?

[bobthebuilder]

No this is an 18" lip that is stepped. 4.5" 36 bolt so this is generally for Japanese wheels.. Namely Work..

[Vqd240z]

Ok so I guess they fit my Work VS-SS wheels. Hmmm I would just need rear lips. Anyone know where I could get some 5.5-7 in step lips for my Work wheels. I'm interested in this barrels if I could get other two I'm asking about

[slide2unlock]

sell me this i have monies

[turbo2nr]

FYI these are perfect to make stepped lip VS-MX 18"

http://farm6.staticflickr.com/5456/9024095084_42e146a7ef_c.jpg

if i still had my vs-mx id be all over these!

[slide2unlock]

still hasn't responded :/

[chris7ian]

Lips still for sale?

[paulseatingabook]

bump for the lols on lip size fights

[snags]

bump from the grave.. never ended up selling these.. price has been edited and is firm
(shipping costs me alot, canada)

[snags]

bump, looking to get rid of these

[snags]

Bump send me offers

[snags]

bumpy bumpy

[snags]

SOLD thanks zilvia