brndck
06-17-2013, 10:30 PM
ok so i'm testing waters on my complete engine swap.
i would prefer to sell it 100% complete and ready to drop in.
it is currently still in the car and 100% running. fires up smooth and easily with no issues.
i have had this engine for almost 10 years.
is complete, all you would need is intercooler and piping.
It it:
Red top stock block
S13 blacktop head
Bc valve springs
Bc valves
Bc titanium retainers
S13.4 valve cover made by Fineline tuning (greddy oil cap not included, stock cap will be provided)
(phase2 coilpack grounding plate NOT included)
Apexi head gasket
Can come with stock oil pan or Isis pan for more $$$
T-pros stainless exhaust mani. It's eBay but I've had it for 8 years with zero issues
Metal multi layer exhaust manifold gasket
Turbo is currently an HKS gt2510, roughly a half step above an s15 t28
I also have a HKS gt2540 that can be substituted for extra $$$
Cobra 1piece elbow/down pipe
Braided turbo lines with s14 water neck and s14 coolant line
Aftermarket pullies, I think they're phase2? Maybe circuit sports? (P/s alt and water pump)
greddy coolant swirl pot NOT included
i do have nismo engine/trans mounts available for additional $$$
Isis intake manifold with n15 throttle body with s14 sr20 pulley and composite/plastic intake manifold gasket
Sti 555cc injectors, with sti harness connectors
FUEL RAIL IS NOT INCLUDED. I'll try to find a stock fuel rail to include, but the one currently on there is NOT included. (it is set up for a/n fittings and i will need it on my next engine)
Z32 maf
GReddy intake tube
K&n air filter
Custom inlet pipe for turbo
Carbonetics carbon blade clutch with matching carbonetics flywheel. Clutch has less than 5,000 miles on it.
Stock trans, always used redline fluid
Reflashed ecu for 555 injectors, z-maf, 1bar of boost, rev limit is 8200
Stock harness included but its not pretty. it is fully functional tho, its just been repaired before so theres some solder connections and electrical tape.
Has clips for sti injectors AND clips for oem ones
I also have a yashio factory copper core radiator for sale.
And a s-afc neo for sale too.
I also have an apexi power fc d-jetro for redtop available for additional $$$
I also have an ATTAIN throttle pulley available for additional $$$
I'm sure I'm forgetting more things.
I want $4.5k obo for everything, and you can come check it out before I yank it out of the car.
if someone wants just the engine without trans or clutch or accessories, then i will part those things out, but I WILL NOT PART OUT until the long block is gone.
562 519 5577
tyler.
most recent photo, taken today.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/9377_10151414620226595_356419794_n.jpg
i would prefer to sell it 100% complete and ready to drop in.
it is currently still in the car and 100% running. fires up smooth and easily with no issues.
i have had this engine for almost 10 years.
is complete, all you would need is intercooler and piping.
It it:
Red top stock block
S13 blacktop head
Bc valve springs
Bc valves
Bc titanium retainers
S13.4 valve cover made by Fineline tuning (greddy oil cap not included, stock cap will be provided)
(phase2 coilpack grounding plate NOT included)
Apexi head gasket
Can come with stock oil pan or Isis pan for more $$$
T-pros stainless exhaust mani. It's eBay but I've had it for 8 years with zero issues
Metal multi layer exhaust manifold gasket
Turbo is currently an HKS gt2510, roughly a half step above an s15 t28
I also have a HKS gt2540 that can be substituted for extra $$$
Cobra 1piece elbow/down pipe
Braided turbo lines with s14 water neck and s14 coolant line
Aftermarket pullies, I think they're phase2? Maybe circuit sports? (P/s alt and water pump)
greddy coolant swirl pot NOT included
i do have nismo engine/trans mounts available for additional $$$
Isis intake manifold with n15 throttle body with s14 sr20 pulley and composite/plastic intake manifold gasket
Sti 555cc injectors, with sti harness connectors
FUEL RAIL IS NOT INCLUDED. I'll try to find a stock fuel rail to include, but the one currently on there is NOT included. (it is set up for a/n fittings and i will need it on my next engine)
Z32 maf
GReddy intake tube
K&n air filter
Custom inlet pipe for turbo
Carbonetics carbon blade clutch with matching carbonetics flywheel. Clutch has less than 5,000 miles on it.
Stock trans, always used redline fluid
Reflashed ecu for 555 injectors, z-maf, 1bar of boost, rev limit is 8200
Stock harness included but its not pretty. it is fully functional tho, its just been repaired before so theres some solder connections and electrical tape.
Has clips for sti injectors AND clips for oem ones
I also have a yashio factory copper core radiator for sale.
And a s-afc neo for sale too.
I also have an apexi power fc d-jetro for redtop available for additional $$$
I also have an ATTAIN throttle pulley available for additional $$$
I'm sure I'm forgetting more things.
I want $4.5k obo for everything, and you can come check it out before I yank it out of the car.
if someone wants just the engine without trans or clutch or accessories, then i will part those things out, but I WILL NOT PART OUT until the long block is gone.
562 519 5577
tyler.
most recent photo, taken today.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash4/9377_10151414620226595_356419794_n.jpg