Levi
06-14-2013, 12:18 AM
City: Portland/Beaverton/Hillsboro
State/Province: Or
First batch of stuff for sale is everything you could imagine off a blacktop s13 sr. The motor was fully built but it blew during the break-in stage due to detonation. The only part I don't have is the block. Most all the parts have less then 700 miles on them. The turbo does not but it was freshly rebuilt by Garrett. I am willing to ship at your cost. So here we go....
- fully built head - $800 - SOLD
has a really nice port and polish job.
HKS 246 cams
Brian Crower springs and titanium retainers
I want to try and sell the head with everything before parting out
- Apexi isamu turbo kit (capable of up to 500whp) - $2000 obo
Garrett/Air Research T3/TO4S turbo
60-1 journal bearing, .48 exhaust A/R
Apexi equal length stainless manifold
44mm Apexi external wastegate
Full 3" custom stainless downpipe, heat wrapped
More info: Isamu Rx-6 Turbo Kit Ps13/rps13 Sr20det Tcw77ls-p20 (Apexi: 702-N740) (http://www.2kracing.com/Product/412.html)
s13 sr to s14 wiring harness - $1000 - SOLD
w/ D-Jetro (map) Power FC and Sard 850cc side feed injectors with all sensors, MAP, boost ect……
- CP Pistons 86.5mm - $350
- Eagle EconoLite H-Rod rods - $250
- REAL Greddy Intake Manifold - $600
- sard fuel rail (brand new never installed) - $200
- ACT 6-puck clutch (less then 700 miles) - $300
- sr tranny (shifts fine in every gear) - $200
- koyo radiator - $200
- gredy pulley kit - $200
- micro polished and balanced crank - $200
- ARP studs - $50 - SOLD
- sr coil packs - $50
- custom carbon fiber coil pack cover - $75
- nismo motor and tranny mounts - $200
- circuit sport sr motor mounts - $50
- freddy front mount intercooler with really nice ic piping from ray at garage auto hero - $250
(it was 1 piece piping but had to cut one to fit s14 chassis)
- q45 Throtle Body - $75
- Power Steering Pump - $60
- SR20det Water Pump - $30
- Crank Angle Sensor - $75
- Freddy oil pan - $50
- Nismo T-stat- $25
I'm probably forgetting some stuff but that’s most of it. I also have all the little miscellaneous stuff off a SR so if you need something specific just text me.
I have a lot of random s14 parts laying around my garage as well...
- s14 Brake Master cylinder - $80
- s14 stock radio - $20
- s14 windshield wiper motor - $30
- ka24de distributor - $50
- ka24de heater core - $50
- s14 manual ecu - $150
- s14 ka power steering pump - $50
- s14 fuel pump - $20
- s14 front seats - $200
- s14 strut tower bar - $50
- s14 Megan front tension rods - $50
- s14 isis rear tow rods (I think they'll fit s13 as well) - $50
- s14 cusco camber plates - $200
- s14 Struts (2 are blown) with eibach springs - $200
- s14 stock inner rod ends - $20
- s14 stock front sway bar with end links - $20
- s14 stock rear sway bar with end links - $20
PICTURES:
LeviathanDC5's Library | Photobucket (http://s1354.photobucket.com/user/LeviathanDC5/library/)
Texting is the easiest way to get in touch with me. I usually always have my phone on my. I will ship at your expense.
503.998.8852
Thanks,
Levi
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1244_zpsc051be4e.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1244_zpsc051be4e.jpg.html)
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1256_zpsc7505672.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1256_zpsc7505672.jpg.html)
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1220_zpsb5401a4d.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1220_zpsb5401a4d.jpg.html)
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1236_zpsd7f4dba2.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1236_zpsd7f4dba2.jpg.html)
State/Province: Or
First batch of stuff for sale is everything you could imagine off a blacktop s13 sr. The motor was fully built but it blew during the break-in stage due to detonation. The only part I don't have is the block. Most all the parts have less then 700 miles on them. The turbo does not but it was freshly rebuilt by Garrett. I am willing to ship at your cost. So here we go....
- fully built head - $800 - SOLD
has a really nice port and polish job.
HKS 246 cams
Brian Crower springs and titanium retainers
I want to try and sell the head with everything before parting out
- Apexi isamu turbo kit (capable of up to 500whp) - $2000 obo
Garrett/Air Research T3/TO4S turbo
60-1 journal bearing, .48 exhaust A/R
Apexi equal length stainless manifold
44mm Apexi external wastegate
Full 3" custom stainless downpipe, heat wrapped
More info: Isamu Rx-6 Turbo Kit Ps13/rps13 Sr20det Tcw77ls-p20 (Apexi: 702-N740) (http://www.2kracing.com/Product/412.html)
s13 sr to s14 wiring harness - $1000 - SOLD
w/ D-Jetro (map) Power FC and Sard 850cc side feed injectors with all sensors, MAP, boost ect……
- CP Pistons 86.5mm - $350
- Eagle EconoLite H-Rod rods - $250
- REAL Greddy Intake Manifold - $600
- sard fuel rail (brand new never installed) - $200
- ACT 6-puck clutch (less then 700 miles) - $300
- sr tranny (shifts fine in every gear) - $200
- koyo radiator - $200
- gredy pulley kit - $200
- micro polished and balanced crank - $200
- ARP studs - $50 - SOLD
- sr coil packs - $50
- custom carbon fiber coil pack cover - $75
- nismo motor and tranny mounts - $200
- circuit sport sr motor mounts - $50
- freddy front mount intercooler with really nice ic piping from ray at garage auto hero - $250
(it was 1 piece piping but had to cut one to fit s14 chassis)
- q45 Throtle Body - $75
- Power Steering Pump - $60
- SR20det Water Pump - $30
- Crank Angle Sensor - $75
- Freddy oil pan - $50
- Nismo T-stat- $25
I'm probably forgetting some stuff but that’s most of it. I also have all the little miscellaneous stuff off a SR so if you need something specific just text me.
I have a lot of random s14 parts laying around my garage as well...
- s14 Brake Master cylinder - $80
- s14 stock radio - $20
- s14 windshield wiper motor - $30
- ka24de distributor - $50
- ka24de heater core - $50
- s14 manual ecu - $150
- s14 ka power steering pump - $50
- s14 fuel pump - $20
- s14 front seats - $200
- s14 strut tower bar - $50
- s14 Megan front tension rods - $50
- s14 isis rear tow rods (I think they'll fit s13 as well) - $50
- s14 cusco camber plates - $200
- s14 Struts (2 are blown) with eibach springs - $200
- s14 stock inner rod ends - $20
- s14 stock front sway bar with end links - $20
- s14 stock rear sway bar with end links - $20
PICTURES:
LeviathanDC5's Library | Photobucket (http://s1354.photobucket.com/user/LeviathanDC5/library/)
Texting is the easiest way to get in touch with me. I usually always have my phone on my. I will ship at your expense.
503.998.8852
Thanks,
Levi
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1244_zpsc051be4e.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1244_zpsc051be4e.jpg.html)
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1256_zpsc7505672.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1256_zpsc7505672.jpg.html)
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1220_zpsb5401a4d.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1220_zpsb5401a4d.jpg.html)
http://i1354.photobucket.com/albums/q686/LeviathanDC5/IMG_1236_zpsd7f4dba2.jpg (http://s1354.photobucket.com/user/LeviathanDC5/media/IMG_1236_zpsd7f4dba2.jpg.html)