thrwnsprkz
06-04-2013, 07:45 AM
Heyo, parting out my comp car.
I built this thing over the last 10 years,
I'll gladly help people who want to buy multiple things, but If you lowball me I'm just going to ignore you and sell the parts to someone else.
Prices as listed, add shipping and paypal if your not local.
I travel around a lot tho If your in the eastern OH/PA/NJ area message me and we could meet up either at an upcoming event or something
Motor:
Assembled two summers ago, 3 local events and couple months daily driving on the setup until I parked it in storage and it sat for two winters and a spring/summer/fall I was living out west.
S13 blacktop bare long lock: $1200 (PENDING)
-Apexi metal HG
-ARP hardware
-brand new Nissan oil pump
-everything else new oem nissan parts/seals
-stock valvecover & oilpan
Power FC D-Jetro: $1100
Commander and sensors included (map, ait)
tuned for 2871r & 740s at MAMotorsports in MD
Garret 2871R .64 exhaust setup: $1000 (PENDING)
Includes AN oil lines, s15 exh mani, turbo outlet, copper mrgasket
Tomei 740's in a newer rail: $500 (PENDING)
Raychem loomed harness for S13 SR into a 14 chassis: $350
Used Exedy stage 2: $180
Still life on it, but I'll measure the thickness for sure, message me
Sr flywheel: $60
Sr trans: $200
RB26 fan trimmed for an SR shroud: $80
Shaved/painted s14 shrould: $80. $120+shipping for both
Greddy IC core: $250
Midmount piping: $50
Blitz DD bov: $100
S14 SR Koyo rad: $200
professionally repaired once by Carnegie Radiator in Pittsburgh
Purple samco hoses: $60
S13.4 Hybrid MA valvecover: $500
Shaved, painted pearl white, tapped with AN line
(& no, I wont sell it for less this thing looks fantastic hung on my wall, Its a work of art)
Greddy oil pan: $280 with hardware
Alt: $60
PS pump: $80
Starter: $100
No grinds
B&M shifter: $150
E-World boost controller: $350
Greddy warning meters 60mm: $500
black face with all sensors, stands, and ecu's
(Boost, Temp, & Oil Press.)
6666 GTRodeo Rocket bunny aero kit: $1000
Zenki front, sides and rear only
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/599411_10104230790094624_1118923316_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/562263_10104230795264264_1901808962_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/392687_10104230795403984_1538710270_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/283214_10101433973193114_868063_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/400843_10104479384015414_1167634158_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/971760_10104479384115214_305229401_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/941570_10104479384329784_1653075186_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-frc3/432058_10104479384244954_1526120158_n.jpg
Anything else you see you maybe interested in, hit me up
412 212 8527
Parts no longer avail:
Stance Coilovers
Kouki front end conv
Text me anytime for more pics, I can text them from my phone, not a computer.
Thanks for looking~Jon
I built this thing over the last 10 years,
I'll gladly help people who want to buy multiple things, but If you lowball me I'm just going to ignore you and sell the parts to someone else.
Prices as listed, add shipping and paypal if your not local.
I travel around a lot tho If your in the eastern OH/PA/NJ area message me and we could meet up either at an upcoming event or something
Motor:
Assembled two summers ago, 3 local events and couple months daily driving on the setup until I parked it in storage and it sat for two winters and a spring/summer/fall I was living out west.
S13 blacktop bare long lock: $1200 (PENDING)
-Apexi metal HG
-ARP hardware
-brand new Nissan oil pump
-everything else new oem nissan parts/seals
-stock valvecover & oilpan
Power FC D-Jetro: $1100
Commander and sensors included (map, ait)
tuned for 2871r & 740s at MAMotorsports in MD
Garret 2871R .64 exhaust setup: $1000 (PENDING)
Includes AN oil lines, s15 exh mani, turbo outlet, copper mrgasket
Tomei 740's in a newer rail: $500 (PENDING)
Raychem loomed harness for S13 SR into a 14 chassis: $350
Used Exedy stage 2: $180
Still life on it, but I'll measure the thickness for sure, message me
Sr flywheel: $60
Sr trans: $200
RB26 fan trimmed for an SR shroud: $80
Shaved/painted s14 shrould: $80. $120+shipping for both
Greddy IC core: $250
Midmount piping: $50
Blitz DD bov: $100
S14 SR Koyo rad: $200
professionally repaired once by Carnegie Radiator in Pittsburgh
Purple samco hoses: $60
S13.4 Hybrid MA valvecover: $500
Shaved, painted pearl white, tapped with AN line
(& no, I wont sell it for less this thing looks fantastic hung on my wall, Its a work of art)
Greddy oil pan: $280 with hardware
Alt: $60
PS pump: $80
Starter: $100
No grinds
B&M shifter: $150
E-World boost controller: $350
Greddy warning meters 60mm: $500
black face with all sensors, stands, and ecu's
(Boost, Temp, & Oil Press.)
6666 GTRodeo Rocket bunny aero kit: $1000
Zenki front, sides and rear only
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/599411_10104230790094624_1118923316_n.jpg
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash4/562263_10104230795264264_1901808962_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/392687_10104230795403984_1538710270_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc1/283214_10101433973193114_868063_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/400843_10104479384015414_1167634158_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/971760_10104479384115214_305229401_n.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash3/941570_10104479384329784_1653075186_n.jpg
https://sphotos-a.xx.fbcdn.net/hphotos-frc3/432058_10104479384244954_1526120158_n.jpg
Anything else you see you maybe interested in, hit me up
412 212 8527
Parts no longer avail:
Stance Coilovers
Kouki front end conv
Text me anytime for more pics, I can text them from my phone, not a computer.
Thanks for looking~Jon