Ramonesfreak2010
06-03-2013, 11:44 AM
Tom
2404946341
Text only
Pick up only
NO trades
Columbia, MD
I've got for sale a pair of green/blue S14 seats. In great condition. No burns or tears. The plastic piece is missing on the recliner lever thing on the driver side. Has a few stains. Could use a good cleaning. Asking $125 for the pair
Don't mind Larry.
http://i144.photobucket.com/albums/r192/ramonesfreak2010/image10_zps615493f2.jpeg (http://s144.photobucket.com/user/ramonesfreak2010/media/image10_zps615493f2.jpeg.html)
My prices are FIRM. I have no time for low ballers, etc. These are quality parts. Not eBay shit.
**NOTE: WILL NOT SELL ANYTHINGS UNTIL THE MOTOR GOES FIRST**
S13 SR20DET Black Top: $1,800 for motor, trans, converted harness for 89-90, ECU, MAF, & stock intake tube. (Does not include flywheel, or clutch) All you would need for a complete swap is a downpipe, intercooler, clutch, and flywheel. I bought this at Japanese Engine Import back in January. Has been running since with no problems at all. It'll start up every time. Has multi layered turbo and turbo manifold gaskets. It shoots out a bit of smoke once in a blue moon. Could be the valve seals. Last I did a compression test, it was 150psi across the board. If you have a compression tester, feel free to come test it out. Other than that, the motor is solid.
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3750_zps377e657e.jpg
Powered By Max Cobra pipe (its a little dirty from dirt. Just needs a good cleaning): $250
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3697_zpsd52318cb.jpg
Spec Stage 3 Clutch: $200
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3733_zpsa3cdd66d.jpg
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3736_zpsbd0c6144.jpg
Fidanza Flywheel: $350
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3732_zps17148c8b.jpg
PBM HMIC: $350
http://i144.photobucket.com/albums/r192/ramonesfreak2010/photo4_zps6bbff2e0.jpg (http://s144.photobucket.com/user/ramonesfreak2010/media/photo4_zps6bbff2e0.jpg.html)
Kouki Tails already converted for USDM harness (two studs are broken, and the bulb housings were fucked up, so I bought aftermarket ones and modified to fit. Works perfect: $350 PENDING
http://i144.photobucket.com/albums/r192/ramonesfreak2010/photo3_zps29edd242.jpg (http://s144.photobucket.com/user/ramonesfreak2010/media/photo3_zps29edd242.jpg.html)
Custom fuel lines (Looks like Chase Bays). Made these myself with -6 AN lines and fittings. Comes with filter. No leaks whatsoever: $150
http://i144.photobucket.com/albums/r192/ramonesfreak2010/photo1_zpsa62cdba1.png (http://s144.photobucket.com/user/ramonesfreak2010/media/photo1_zpsa62cdba1.png.html)
Pignose Lip (no cracks. Needs paint tho): $50
*not pictured*
[/align]
2404946341
Text only
Pick up only
NO trades
Columbia, MD
I've got for sale a pair of green/blue S14 seats. In great condition. No burns or tears. The plastic piece is missing on the recliner lever thing on the driver side. Has a few stains. Could use a good cleaning. Asking $125 for the pair
Don't mind Larry.
http://i144.photobucket.com/albums/r192/ramonesfreak2010/image10_zps615493f2.jpeg (http://s144.photobucket.com/user/ramonesfreak2010/media/image10_zps615493f2.jpeg.html)
My prices are FIRM. I have no time for low ballers, etc. These are quality parts. Not eBay shit.
**NOTE: WILL NOT SELL ANYTHINGS UNTIL THE MOTOR GOES FIRST**
S13 SR20DET Black Top: $1,800 for motor, trans, converted harness for 89-90, ECU, MAF, & stock intake tube. (Does not include flywheel, or clutch) All you would need for a complete swap is a downpipe, intercooler, clutch, and flywheel. I bought this at Japanese Engine Import back in January. Has been running since with no problems at all. It'll start up every time. Has multi layered turbo and turbo manifold gaskets. It shoots out a bit of smoke once in a blue moon. Could be the valve seals. Last I did a compression test, it was 150psi across the board. If you have a compression tester, feel free to come test it out. Other than that, the motor is solid.
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3750_zps377e657e.jpg
Powered By Max Cobra pipe (its a little dirty from dirt. Just needs a good cleaning): $250
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3697_zpsd52318cb.jpg
Spec Stage 3 Clutch: $200
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3733_zpsa3cdd66d.jpg
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3736_zpsbd0c6144.jpg
Fidanza Flywheel: $350
http://i144.photobucket.com/albums/r192/ramonesfreak2010/IMG_3732_zps17148c8b.jpg
PBM HMIC: $350
http://i144.photobucket.com/albums/r192/ramonesfreak2010/photo4_zps6bbff2e0.jpg (http://s144.photobucket.com/user/ramonesfreak2010/media/photo4_zps6bbff2e0.jpg.html)
Kouki Tails already converted for USDM harness (two studs are broken, and the bulb housings were fucked up, so I bought aftermarket ones and modified to fit. Works perfect: $350 PENDING
http://i144.photobucket.com/albums/r192/ramonesfreak2010/photo3_zps29edd242.jpg (http://s144.photobucket.com/user/ramonesfreak2010/media/photo3_zps29edd242.jpg.html)
Custom fuel lines (Looks like Chase Bays). Made these myself with -6 AN lines and fittings. Comes with filter. No leaks whatsoever: $150
http://i144.photobucket.com/albums/r192/ramonesfreak2010/photo1_zpsa62cdba1.png (http://s144.photobucket.com/user/ramonesfreak2010/media/photo1_zpsa62cdba1.png.html)
Pignose Lip (no cracks. Needs paint tho): $50
*not pictured*
[/align]