Log in

View Full Version : MAF Problem's !! SR20DET 91 240sx


CalilayneSR20
06-02-2013, 05:52 PM
Only one no what MAF would work with my 91 240sx coupe with a redtop sr20det. Seems to be bad and don't no what 3 prong will work for 91.

its idling ok but engine doesn't seem to change idel when I disconnect my maf... won't rev passed 2500... any help let me no

zac

Kingtal0n
06-02-2013, 06:11 PM
Only one no what MAF would work with my 91 240sx coupe with a redtop sr20det. Seems to be bad and don't no what 3 prong will work for 91.

its idling ok but engine doesn't seem to change idel when I disconnect my maf... won't rev passed 2500... any help let me no

zac

Get yourself a few KA24E mafs from a junk yard. Actually just remove the maf sensor portion (leave the metal housing) you can pick up a few usually off any old S13s sitting around in various U-pull its. usually.

Try them all. You will have various luck but out of 3 usually 1 works really good.

Remembr, KA24E not DE the DOHC mafs wont work.

CalilayneSR20
06-03-2013, 10:58 AM
Don't really have any junk yards near by.. seems like the connector thats attached to the harness part wont snap Into place. . Very lose.. could I get these connectors at like auto zone?? And should I ask for a sohc maf right??

Mikester
06-03-2013, 11:54 AM
^^The MAFS sensor plug does not 'snap' into place. It's held in by a metal retainer (looks like a giant staple). You can get one from a Nissan dealer.... or a junk car... or make one out of bailing wire.

CalilayneSR20
06-03-2013, 12:01 PM
I see what u mean I dont have the wire that's in it. Maybe should wrap that sucker up with tape lol. Ima check my power source and see

Mikester
06-03-2013, 12:07 PM
^^yep- do whatever you can do as a temporary measure to see if you can get the car to run... then do a permanent fix when you got it figured out.

CalilayneSR20
06-03-2013, 12:14 PM
Awesome. Thanks guys. Worse case it is the maf .. could I go to like autozone and get one.. people are saying get the sohc maf instead of the dohc cause the one I have may be the dohc.. I jave a 91 240 chassis that had the ka24de in it

now sr20det

Mikester
06-03-2013, 01:19 PM
^^no. You NEED either and SR20DET or KA24E MAFS. The DE MAFS will not work.

CalilayneSR20
06-03-2013, 01:33 PM
Ok the ka24e maf I can just buy from a parts store?
Also the connectors u said nissan dealership will only have them

Mikester
06-03-2013, 02:13 PM
Junk yard would have them, Nissan dealer... Very easy to home-make.

As far as the MAFS, do a Google search, Amazon.com, Ebay etc.