SR turbo lines.

[Sthirteen90]

Hey does anybody have a good clear diagram, or series of pictures, to show me where all the turbo lines go? oil and coolant feed and return. Ive been looking around for a while but cant find anything with all the answers. I have a black top s13 sr20 with a t25. thanks

[ultimateirving]

Have you looked at the turbo? the oil feed and drain are normally on the top and bottom of turbo when hanging from the manifold.
The coolant enters from the sides. if im not mistaken, orientation on coolant line isn't a factor, just whatever is easiest to route

In the future if you have the turbo off, you can spin the shafts and stare into the holes, the one that has the spinning parts is the one that needs the oil feed.

[Sileighty_85]

http://zilvia.net/f/chat/297481-small-questions-thread-search-first-use-instead-making-new-threads.html

[Sthirteen90]

I know I have them right on the turbo, I'm more confused about where they connect to the block.

[Trinidrift3]

stand looking over the driver fender at the engine. on the bottom left under the maifold and to the left of the engine mounts and right of the power steering pump braket there is a spot for the coolant hose. right under it is the spot for the oil line. on the bottom of the turbo you'll see the oil return line going to the oil pan. gravity moves the oil out of the turbo and moves it to the pan so that line always has to be facing down so the oil can drain properly. the last line is the other coolant hose which runs to the back of the block
search, its pretty easy to find the answers.

[Sthirteen90]

That helps a lot. But I have what seems to be 3 connection points on that side of my block. There's the one near the top wich I have the one coolant line in. Then there is one directly under it. Like an inch away. Then there is another one further down.