Johny5
05-29-2013, 06:54 AM
326 Power original spindles. Spindles are in great shape but are straight drilled 3/4" for balljoint and 5/8" for tie rod. 5/8" is the ID most commonly used and found in SPL products outter tie rods, etc. 3/4" is the size also commonly found in most aftermarket balljoint setups. George is making a 3/4" Aurora balljoint setup or many guys have built them on NRR that can be followed. $300
http://www.stewartleask.com/build/326-power-spindles-and-spherical-balljoints pics of spindles
(1) Tein s14 hardened inner tie rod, like new and includes spacer. i'll toss in the other but its bent. these have 1 event on them, blue grease still in tact and all. $50
Tein 350z hardened inner tie rods, new, spacers included. depending on your inner/outter tie rod configuration these are sometimes necessary. thread into 240sx racks, has oem s14 outter tie rod thread/pitch, perfect for guys running the 8mm rack spacers. $120
s13 stiff rack bushings, used but in good shape, $25
http://www.stewartleask.com/build/326-power-spindles-and-spherical-balljoints pics of spindles
(1) Tein s14 hardened inner tie rod, like new and includes spacer. i'll toss in the other but its bent. these have 1 event on them, blue grease still in tact and all. $50
Tein 350z hardened inner tie rods, new, spacers included. depending on your inner/outter tie rod configuration these are sometimes necessary. thread into 240sx racks, has oem s14 outter tie rod thread/pitch, perfect for guys running the 8mm rack spacers. $120
s13 stiff rack bushings, used but in good shape, $25