PDA

View Full Version : WA FS: Complete S13 Digital Climate control swap

Newtypex
05-28-2013, 01:34 AM
City:Tacoma
State/Province:WA

Soldddddddd

Item Description: I have a complete JDM Digital climate control swap for your S13. Comes with everything you need to do the swap. I've pre modified the harness so that you only have to hook up two wires, the power wire and a ground. It comes with the ambient outside air temp which if you use you'll have to run two wires from wherever you put it to the harness and I'll mark what two wires to hook them up to. You really only need the outside temp sensor if you have AC. It works with out it.

If you are aware of the swap you'll know that not everything is in the picture. I have everything else you need its just not in the picture. Its all boxed up and ready to go.
Also included but missing in the pic:
Inside temp sensor and Aspirator tube
Full uncut dcc harness.

http://i31.photobucket.com/albums/c389/newtype42o/20130516_183251_zps01dced49.jpg

Heres mine: Just converted it to LED's
http://i31.photobucket.com/albums/c389/newtype42o/epic/20130522_170645_zps5e3df50b.jpg
that_one_coupe
05-28-2013, 10:56 AM
Free bump for LED swap
JBotch79
05-28-2013, 11:09 AM
These are sick!! bump for the leds
d_nice
05-28-2013, 11:40 AM
yea looks good ....
240boi115
05-28-2013, 12:16 PM
now thats what i call sexy!!! my only Q here and i know its a noob Q but ill ask anyway.. my car is sohc does that even matter when hooking this up? just curious as to there are some wiring differences between dualcam and singlecam. especially since you pre did the harness.
hotlavaflow
05-28-2013, 12:26 PM
You have two blower speed sensors in the pic, sell me one!!!!
Newtypex
05-29-2013, 08:46 AM
Single cam and dual.cam wiring is the same
Newtypex
05-29-2013, 08:48 AM
And there werent any extras. The all went to complete swaps and now I have one swap left.
Ros7.exe
05-29-2013, 09:02 AM
How did you do the LED Swap?
Pblesh85
05-29-2013, 01:54 PM
I'm interested in the dcc stuff and I'm local. Please Check you pm. Feel free to call or text

8314190555- Preston
Newtypex
05-29-2013, 05:07 PM
Pm and text sent as for led conversion check my build thread
Ofrisco89
05-29-2013, 05:10 PM
Free Bump :bigok:
yetijeff
05-29-2013, 05:14 PM
Dam I want this... Any trades?
hionpsi
05-29-2013, 06:00 PM
Free bump! Where were you last week bro
Newtypex
05-29-2013, 11:11 PM
lol what??

Cash only. No trades
hionpsi
05-30-2013, 12:23 AM
I asked where were you like a few weeks ago when I was looking for this
ray_dizzle33
05-31-2013, 12:33 AM
I only need an inside temp sensor!
drod327
05-31-2013, 06:45 AM
Write up on the led swap?
Newtypex
05-31-2013, 07:14 AM
Solddddddddddd
jhon-s13
12-30-2013, 10:29 PM
City:Tacoma
State/Province:WA

Soldddddddd

Item Description: I have a complete JDM Digital climate control swap for your S13. Comes with everything you need to do the swap. I've pre modified the harness so that you only have to hook up two wires, the power wire and a ground. It comes with the ambient outside air temp which if you use you'll have to run two wires from wherever you put it to the harness and I'll mark what two wires to hook them up to. You really only need the outside temp sensor if you have AC. It works with out it.

If you are aware of the swap you'll know that not everything is in the picture. I have everything else you need its just not in the picture. Its all boxed up and ready to go.
Also included but missing in the pic:
Inside temp sensor and Aspirator tube
Full uncut dcc harness.

http://i31.photobucket.com/albums/c389/newtype42o/20130516_183251_zps01dced49.jpg

Heres mine: Just converted it to LED's
http://i31.photobucket.com/albums/c389/newtype42o/epic/20130522_170645_zps5e3df50b.jpg

Write up on the led swap o can you tell me the size o web where I can find the bulbs plz