NRG Quick Release and Hub

[Kelevran]

Hi, I just installed my nrg 2.0 quick release and hub to my S14 and wired the horn. I was wondering if there is anyway to make the cancel turn signal work? If anyone has any idea how to make it work or where I can find information on this let me know. Thanks.

[zerodameaon]

Works out of the box unless you got the wrong one or installed it wrong, did you pop off the two posts? The posts are for S13 and the little holes are for S14, bet that is your problem. You should have SRK-140H and the little holes need to be aligned correctly.

See those three holes near the center hole, if you did not align these your cancel will not work.
https://www.getnrg.com/files/node_images/SRK-140H%20Back.jpg


Click here to see the steering column side
http://zilvia.net/f/hookup/172015-nrg-steering-wheels-suede-leather-quick-releases-short-hub.html#post1763870

[Kelevran]

Right on for the info. Pretty sure the posts are what caused the problem. Will fix tomorrow later today.
Thanks

[zerodameaon]

Yup NP. They need some instructions in the box IMO.

[jr_ss]

They also need to realign those holes. The holes need some massaging to fit the turn signal cancel from the S14 as the two lower ones are too close together.