dfs23
05-27-2013, 08:02 PM
http://chambana.craigslist.org/cto/3833539994.html
someone please buy this and let me go to events again...
Looking for $4400 OBO
Selling my project 240sx s13 coupe. This car is meant for the track. It starts and runs just fine, but I haven't taken it driving on the street. I really wouldn't recommend that you try to drive it home, since it has no windows or seats and isn't tuned or aligned or anything, BUT I'm not trying to tell you what to do with your life, so it really is up to you if you buy it.
- ka-t
- parts shop max oil filter relocation kit
- parts shop max super angle kit
- all rear (3) parts shop max arms
- BRAND NEW Parts Shop Max coilovers
- megan traction arms
- ichiba 5 lug hubs
- stri 60mm gauges
- autometer tachometer
- custom wire harness/switch panel
- full roll cage (made to Midwest Drift Union specs for anyone who cares)
- no windows
- only downpipe for exhaust (stops at the cat)
- open diff
- nrg hub + quick release and sparco steering wheel
- custom lowered seat brackets
- custom jacking points (bar runs along the entire side of the car)
- origin rear over fenders
- rear fenderwells are cut out to run bigger rims/tires lower
- no rust on the frame rails or underside of the car
- clean unbent chassis
- no hood
- origin front fenders included (not installed)
- no head lights
- cusco solid engine mounts
- completely gutted interior (no heater, no radio, no ac)
- does NOT come with the rims pictured, will come with black 16 rota torques (almost brand new rims too)
- 300zx brakes and brembo slotted and drilled rotors
- ACT 6 puck sprung clutch and lightweight flywheel
here is a small break down of the prices and this doesnt include labor or any of the small stuff. this is street price stuff too, and most of this stuff is brand new and never been driven on or used, just installed.
I do NOT want to part it out, just letting you know roughly what things cost on it...
running ka24-turbo 1500
cage 1000
pbm knuckles kit 300
pbm rear arms (all 3) 200
ichiba hubs 250
custom wire harness 250
gauges 100
quick release hub + sparco 250
rotas 300
300zx brakes + brembo rotors 150
origin fenders rear 200
start up/idle video
IMG1399 - YouTube (http://www.youtube.com/watch?v=azpfrxUD9nc&feature=youtu.be)
http://images.craigslist.org/3Gb3K23N45N65K85F9d5ra4421ff5e35d144f.jpg
http://images.craigslist.org/3K93Ie3M75I25K95M8d5r06b052a98322178e.jpg
http://images.craigslist.org/3M23J43H35K65F95Jbd5re6efb4cda43e1641.jpg
http://images.craigslist.org/3Kd3Ib3N65K95H15M6d5r07acec26438216f5.jpg
http://images.craigslist.org/3E23La3N25Ld5I35Fdd5r722861c04ad2142c.jpg
http://images.craigslist.org/3E33G13Nb5I75Gb5M1d5r6783964f080c1621.jpg
http://images.craigslist.org/3E83I43M75N55H35J8d5r66784ea0772016cc.jpg
https://post.craigslist.org/imagepreview/00J0J_l8fB1nIpvgb_600x450.jpg
More pictures upon request.
If you have any questions, feel free to TEXT me @ 217-778-3357
MAKE ME AN OFFER
Thanks
someone please buy this and let me go to events again...
Looking for $4400 OBO
Selling my project 240sx s13 coupe. This car is meant for the track. It starts and runs just fine, but I haven't taken it driving on the street. I really wouldn't recommend that you try to drive it home, since it has no windows or seats and isn't tuned or aligned or anything, BUT I'm not trying to tell you what to do with your life, so it really is up to you if you buy it.
- ka-t
- parts shop max oil filter relocation kit
- parts shop max super angle kit
- all rear (3) parts shop max arms
- BRAND NEW Parts Shop Max coilovers
- megan traction arms
- ichiba 5 lug hubs
- stri 60mm gauges
- autometer tachometer
- custom wire harness/switch panel
- full roll cage (made to Midwest Drift Union specs for anyone who cares)
- no windows
- only downpipe for exhaust (stops at the cat)
- open diff
- nrg hub + quick release and sparco steering wheel
- custom lowered seat brackets
- custom jacking points (bar runs along the entire side of the car)
- origin rear over fenders
- rear fenderwells are cut out to run bigger rims/tires lower
- no rust on the frame rails or underside of the car
- clean unbent chassis
- no hood
- origin front fenders included (not installed)
- no head lights
- cusco solid engine mounts
- completely gutted interior (no heater, no radio, no ac)
- does NOT come with the rims pictured, will come with black 16 rota torques (almost brand new rims too)
- 300zx brakes and brembo slotted and drilled rotors
- ACT 6 puck sprung clutch and lightweight flywheel
here is a small break down of the prices and this doesnt include labor or any of the small stuff. this is street price stuff too, and most of this stuff is brand new and never been driven on or used, just installed.
I do NOT want to part it out, just letting you know roughly what things cost on it...
running ka24-turbo 1500
cage 1000
pbm knuckles kit 300
pbm rear arms (all 3) 200
ichiba hubs 250
custom wire harness 250
gauges 100
quick release hub + sparco 250
rotas 300
300zx brakes + brembo rotors 150
origin fenders rear 200
start up/idle video
IMG1399 - YouTube (http://www.youtube.com/watch?v=azpfrxUD9nc&feature=youtu.be)
http://images.craigslist.org/3Gb3K23N45N65K85F9d5ra4421ff5e35d144f.jpg
http://images.craigslist.org/3K93Ie3M75I25K95M8d5r06b052a98322178e.jpg
http://images.craigslist.org/3M23J43H35K65F95Jbd5re6efb4cda43e1641.jpg
http://images.craigslist.org/3Kd3Ib3N65K95H15M6d5r07acec26438216f5.jpg
http://images.craigslist.org/3E23La3N25Ld5I35Fdd5r722861c04ad2142c.jpg
http://images.craigslist.org/3E33G13Nb5I75Gb5M1d5r6783964f080c1621.jpg
http://images.craigslist.org/3E83I43M75N55H35J8d5r66784ea0772016cc.jpg
https://post.craigslist.org/imagepreview/00J0J_l8fB1nIpvgb_600x450.jpg
More pictures upon request.
If you have any questions, feel free to TEXT me @ 217-778-3357
MAKE ME AN OFFER
Thanks