Exedy twin plate clutch torque specs

[90S13]

Anyone happen to know the correct numbers? Both for the flywheel and the pressure plate? S13 SR20.
Found some where that the flywheel is 66ft/lbs and the pressure plate is 23ft/lbs, this sound correct? I thought that the flywheel numbers were a little on the low side. Any help is appreciated!

[Mikester]

You can get the flywheel torque values from the S14 w/SR20DET FSM.

As far as the bolts around the pressure plate, you might want to contact Exedy for those values... I usually just make sure they are good 'n' tight to a common-sense level.

[jr_ss]

Exedy told me factory specs with Red loctite.