PDA

View Full Version : NV Huge parts list sr/ka/rb/ca/z/2j


fortunecookie
05-22-2013, 07:38 PM
For items that have not been sold, Please refer to newer posts

fortunecookie
05-22-2013, 07:39 PM
.................

fortunecookie
05-22-2013, 07:43 PM
..........

fortunecookie
05-22-2013, 07:44 PM
..........

silviaNC
05-22-2013, 08:02 PM
Specs on rb26 hks cams?

ryandh
05-22-2013, 08:24 PM
same as above ^^^ Lift/duration on in/ex thanks.

Also, Nismo Gmax clutch... pull or push type?

fortunecookie
05-22-2013, 08:45 PM
Specs on rb26 hks cams?

264 duration
8.7 lift

fortunecookie
05-22-2013, 08:46 PM
same as above ^^^ Lift/duration on in/ex thanks.

Also, Nismo Gmax clutch... pull or push type?

pull style

ryandh
05-22-2013, 08:59 PM
pull style

how much left on the discs? twin or triple plate???

fortunecookie
05-22-2013, 09:20 PM
how much left on the discs? twin or triple plate???

80% left, twin plate

fortunecookie
06-04-2013, 05:52 PM
sold the bov & 92 m/t ecu. still got lots left!

nachos14
06-04-2013, 05:57 PM
Lots of good parts!

william's'
06-04-2013, 06:18 PM
How bad is the kouki left (driver) tail light cracked? interested!

fortunecookie
06-04-2013, 06:33 PM
How bad is the kouki left (driver) tail light cracked? interested!

pics are in the post, but in case you didn't see..

http://im1.shutterfly.com/media/47a3db01b3127ccef37cf12a185400000030O00AbsmLZw4bN2 wPbz4G/cC/f%3D0/ls%3D00607688612720130521034837204.JPG/ps%3D50/r%3D0/rx%3D550/ry%3D400/

http://im1.shutterfly.com/media/47a3db01b3127ccef37ca86c58a600000030O00AbsmLZw4bN2 wPbz4G/cC/f%3D0/ls%3D00607688612720130521034858764.JPG/ps%3D50/r%3D0/rx%3D550/ry%3D400/

jroy1234
06-05-2013, 09:32 AM
do yo have the block adapter fot the oil relocate kit
?

richmond82
06-05-2013, 09:48 AM
I want the Oil Pump. I was going to buy one from FRSport Today ! ! !! ! ! ! ! !
Also need the BRAND NEW Oil filter relocator kit $50
Would you ship to 97501 for $200 total if i bought both today ?
Also do you have an ignitor chip my buddy was looking for one
BTW Bump for you for Baller ass Parts and prices

richmond82
06-05-2013, 09:50 AM
I would like to buy the oil pump and have a quick question or two for you - emailing you now

fortunecookie
06-05-2013, 08:44 PM
do yo have the block adapter fot the oil relocate kit
?

No, sorry. You can get one for like $30 on anplumbing.com though

richmond82
06-06-2013, 09:30 AM
Paypaling you now for the oil pump and the oil relocate adapter and lines. Thanks for the quick responses ! will buy from you again for sure

fortunecookie
06-07-2013, 05:37 PM
I've updated the list, and added a few more things - wiring harnesses, ECU, and s14 5-lug and knuckle sets!

Thanks!

richmond82
06-10-2013, 09:11 PM
Thank you for the oil pump and lines/filter block. Do you know what adapter i would order to match the line sizes as they done fit on the stock oil feed from the block. All guidance is appreciated.

Would the oil cooler you are selling work for this
BRAND NEW Hks copy oil cooler - 7"x12" $50 ?

QuickSpoolSR
06-11-2013, 08:33 AM
are the tomei poncams s13 or 14

06-11-2013, 12:15 PM
Plenty of pictures, nice thread and GLWS!

fortunecookie
06-11-2013, 03:55 PM
are the tomei poncams s13 or 14

They're for 14

richmond82
06-11-2013, 04:18 PM
Thank you for the oil pump and lines/filter block. Do you know what adapter i would order to match the line sizes as they done fit on the stock oil feed from the block. All guidance is appreciated.

Would the oil cooler you are selling work for this
BRAND NEW Hks copy oil cooler - 7"x12" $50 ?

fortunecookie
06-14-2013, 11:05 PM
Sold a lot of parts, but still got lots. I added SR20 CAS & S14 ported head. I also added pics of the cams.

Thanks everyone! :)

heychris
06-14-2013, 11:43 PM
Nismo diff still avail?

Ch

Sent using XT912 M

ghetto180
06-15-2013, 09:34 AM
How much shipped to 98034 thanks

fortunecookie
06-15-2013, 12:53 PM
How much shipped to 98034 thanks

$116 shipped. (flat rate usps priority)

richmond82
06-17-2013, 10:14 AM
Sold a lot of parts, but still got lots. I added SR20 CAS & S14 ported head. I also added pics of the cams.

Thanks everyone! :)

Asked a few times as well as pmd :duh:about the oil cooler and got no response.

fortunecookie
06-19-2013, 06:15 PM
Asked a few times as well as pmd :duh:about the oil cooler and got no response.

Oil cooler is -10. I replied to your email :) If you still have my # from previous transaction, feel free to text or call!

rune1241
06-30-2013, 06:23 AM
Stupid question, but would the auto 1jz ecu work with a manual 1jz? If so i want it

fortunecookie
07-12-2013, 11:47 AM
Stupid question, but would the auto 1jz ecu work with a manual 1jz? If so i want it

My bad for the late response, I was out of state for the holiday. Yes, it will work.

$6 shipping + 3% paypal fee for the 1J ecu.

You can email me [email protected]

2LiterTurbo
07-14-2013, 02:55 AM
Sent you a PM...Interested in some parts.

fortunecookie
07-30-2013, 12:06 AM
bump! make me an offer on something, and I'm game to negotiate! I need these GONE!

fortunecookie
10-07-2013, 07:49 PM
HI EVERYONE! I lowered the prices on almost everything, and I added more things for sale.
Thanks for checking it out.

theultimatehero
10-07-2013, 10:01 PM
Does the boss steering hub retains signal cancel and horn function? Any chance you have airbag resistor as well?

fortunecookie
10-07-2013, 11:55 PM
Does the boss steering hub retains signal cancel and horn function? Any chance you have airbag resistor as well?


S13, yes. S14, no. No airbag resistors.

GRNxS14
10-17-2013, 08:15 PM
Any details on the HKS RB26 cams?

illustrated_s13
10-17-2013, 08:22 PM
do you have a CA18det MAF ?

fortunecookie
10-20-2013, 06:48 PM
do you have a CA18det MAF ?

Sorry, I don't have a CA18DET MAF, but I have a CA18DET ECU if that's what you meant? Yup, still got it if you want it. $5 flat rate priority shipping to anywhere in the states for the ECU.

fortunecookie
10-21-2013, 08:21 PM
Any details on the HKS RB26 cams?

my bad for late response..

2202-RN124
To Suit BNR32,BCNR33,BNR34,WGNC34, RB26DETT, INLET 264 Degree, LIFT 8.7, STEP 1(SS-CAM)

2202-RN125
To Suit BNR32,BCNR33,WGNC34, RB26DETT, EXHAUST 264 Degree, LIFT 8.7, STEP 1(SS-CAM)

dbulldog1992
01-07-2014, 09:13 PM
Does the s13 apexi fc come with the commander? Can I get some pictures of everything with it? Is it ka24det compatible? Shoot me a pm

fortunecookie
01-12-2014, 07:46 PM
Does the s13 apexi fc come with the commander? Can I get some pictures of everything with it? Is it ka24det compatible? Shoot me a pm


Sorry, power fc is no longer available..