S13 Brake hard lines!

[blankblank]

So basically i need to replace my hard lines in my engine bay (for the front brakes). I don't want to go the hard-line route.
So i want to make this:
Chase Bays Brake Line Relocation for OEM MC, inBay - Nissan 240sx S13 | S14 - Nissan 240sx - ChaseBays.com (http://www.chasebays.com/product/nissan-240sx/brakes/chase-bays-brake-line-relocation-for-oem-mc-inbay--nissan-240sx-s13--s14)

I think i can do it much cheaper i just need to know the fittings.
I do know i need:
-3AN lines
m10x1.0 banjo fitting for the BMC

What fitting do i need for the other end?
m10x1.0 double flair?

If someone could chime in with experience or with links to each fittings/hoses i need that would be even better.
Thanks for the help!

[Drift_FX]

braided brake lines are one of those things better to buy preassembled because they have such high psi, and you dont want that to fail....

[blankblank]

braided brake lines are one of those things better to buy preassembled because they have such high psi, and you dont want that to fail....
rx
I will have the shop make the line for me with crimp fittings.
Will line with .125 inside diameter be too big? Parker parflex 540n-2 is the line in question.