PDA

View Full Version : jdm climate control wiring help!!!! pics inside


rhdsilvi85
05-08-2013, 11:37 AM
ok guys so I've had issues with my car since I bought it (kid before me didn' know what he was doing) I've been following help from fellow zilvia members and they told me to pull the dash and make sure all the wiring looks good.. thank god I listened because this is what I found

http://i20.photobucket.com/albums/b214/Eurorider1/IMG_20130505_212224_138_zpse9f70241.jpg (http://s20.photobucket.com/user/Eurorider1/media/IMG_20130505_212224_138_zpse9f70241.jpg.html)

I ended up pulling out the wiring since the wiring going to the motor blower I believe it what it is called was just tied together and electric taped (smh).. I need help figuring out where everything goes he jacked this wiring all up and got splices going everywhere..

I did a few things as followed
I depinned and removed and moved the green with white strip to big plug.
I depinned the single red wire and have that out to be wired to the black and red strip wire on oem wiring harness or yellow wire on aftermarket radio wire harness...

I had to clip the blue and red stripe wire (not able to get it depinned) he had it cut in two with another wire spliced on it.. I took off third wire and put them back together and soldered and shrink wrapped.. what I'm needing help is figuring out where all these wires are supposed to go.. hes got like 3 wires all spliced together its a wire nightmare.. I can't find anything on the wiring stuff just on the installing... any help would be great thank you

http://i20.photobucket.com/albums/b214/Eurorider1/IMG_20130508_105747_123_zps4e8e6841.jpg (http://s20.photobucket.com/user/Eurorider1/media/IMG_20130508_105747_123_zps4e8e6841.jpg.html)

http://i20.photobucket.com/albums/b214/Eurorider1/IMG_20130508_105648_442_zps9d884746.jpg (http://s20.photobucket.com/user/Eurorider1/media/IMG_20130508_105648_442_zps9d884746.jpg.html)

http://i20.photobucket.com/albums/b214/Eurorider1/IMG_20130508_105600_407_zps6dd4d160.jpg (http://s20.photobucket.com/user/Eurorider1/media/IMG_20130508_105600_407_zps6dd4d160.jpg.html)

also I know I cut the light sensor wire I'll have to redo that as well but I needed to get it out of the car to do cuz it's a damn nightmare.

EvilRB
05-08-2013, 12:20 PM
LOL that dose not look fun at all

In the S14 FSM there is a Digital wireing diagram, use it and follow what leads where
it should give you a road map to rewire this thing.
From what I remember there are a few wire that you don't need in the conversion so there will be some extras as well as a few that need to be spliced together.

S14 FSM (remember the s13 one only has the USDM a/c guide)
Manuals > JDM and European Cars > S14 Silvia - Zenki (SR20DET) - Nissan 240SX Performance Tuning (http://www.240edge.com/manuals/s14-sr20det.html)

and another useful site:
Nissan 240sx Performance, Modification, Repair and DIY Articles - by NICOclub.com (http://www.240sxtech.com/)

rhdsilvi85
05-08-2013, 06:52 PM
bump thanks......

rhdsilvi85
05-09-2013, 09:18 AM
Anyone actuslly have pics of the wiring on the jdm side? Ive been color matching but i still have a few wires with no home