Sr-vg transmission wiring help!!!

[Cubantunr]

ok so I bought the mazworx Sr to vg adapter plate kit and everythings perfect car runs strong shifts smooth, but I would like to know which wires connect where so I can have my reverse lights and speedometer working. I spoke with guy from mazworx while ago but he was uncertain, and there PDF doesn't exactly help and site seems to be down for me so I can't get a hold of them. PLEASE ANY HELP WOULD BE GREAT. Have the car jacked up ready for wiring but cant seem to find right locations.

[fliprayzin240sx]

Match it up on your SR tranny. The positions for the sensors are roughly at the same points between Nissan RWD transmissions.

[silnv]

The speed from the VG transmission will not read correctly on your gauge. You will either need to get a Dakota Digital signal converter or I have seen some people modify the circuit board on the gauge itself. A search on google should find you some good information on both options.

[fliprayzin240sx]

The speed from the VG transmission will not read correctly on your gauge. You will either need to get a Dakota Digital signal converter or I have seen some people modify the circuit board on the gauge itself. A search on google should find you some good information on both options.

I cant remember 100% if RB25 sensors will plug into the VG transmission, but if it does, RB25 sensor will read out accurately on S14 speedos.

[silnv]

I cant remember 100% if RB25 sensors will plug into the VG transmission, but if it does, RB25 sensor will read out accurately on S14 speedos.
I had never heard that. That is some good info if it works. I will have to do some research on it. I have the same SRVG kit, but also will be running a Haltech PS 1000, and might go with the Racepak/Hatech cluster. If I use the factory cluster this was going to be an issue I needed to take care of.

[jr_ss]

I used the Dakota digi on mine. Make sure you get the wires correct if you go that route. I was having an issue with mine not reading correctly, turns out there is polarity on the S14 speedo.

[fliprayzin240sx]

Yup, Im using the stock RB25 speed sensor on my S14 and its within 1-2 miles reading wise.

Also, S14 clusters, you can adjust the potentiameter on the tach to make it work with the RB25.

[Cubantunr]

I have an s13 with dohc cluster, hopefully works same as s14..

[fliprayzin240sx]

Nopes, you'd need a dakota converter.

[EsChassisLove]

I coulda swore Mazworx offers something to correct the speedo.

[jr_ss]

I coulda swore Mazworx offers something to correct the speedo.

They do, the Dakota Digital signal converter we have been talking about. It's an extra $100.

[Cubantunr]

Dont suppose any of you have pictures or can tell me which color wires go to what..
Unless theirs a write up ibe never seen before..

[slow92]

So.....I have a s13 and I am going to use an Autometer programmable speedometer. Would I need to get a Dakota Digital converter or will the speedometer calibrate itself?