genericforumname
05-05-2013, 03:01 PM
just like it sounds, need to start offloading some of the junk I've accrued over the years, starting with the stuff I have the easiest access to, the front brakes and headlights from my front clip. both are functional but ast possibly for years so they need some TLC. headlights need a reconditioning (what plastic headlights don't) and the brakes should 100% be rebuilt before use. the intake was used on my swap at first before I decided to go ahead and switch to a z32 maf and get a rom tune from enthalpy. used for maybe 50 miles before the switch.
pics
http://i1230.photobucket.com/albums/ee490/Dean407/intake2.jpg (http://s1230.photobucket.com/user/Dean407/media/intake2.jpg.html)
http://i1230.photobucket.com/albums/ee490/Dean407/headlights_zps7abf0dbf.jpg (http://s1230.photobucket.com/user/Dean407/media/headlights_zps7abf0dbf.jpg.html)
http://i1230.photobucket.com/albums/ee490/Dean407/brakes_zpsb299338c.jpg (http://s1230.photobucket.com/user/Dean407/media/brakes_zpsb299338c.jpg.html)
just some notes, the brakes are basically identical to a z32 front iron setup, uses the same rotors pads and rebuild kits. the intake is only for an s14sr in an s14 chassis, can't say for sure if it will fit on other cars or not. the headlights have a small crack in the back where the part that screws in place to hold the bulb in goes (don't know the technical name) but it does not affect the function at all.
looking for $200+shipping each for the brakes and lights and $40+shipping for the intake
pics
http://i1230.photobucket.com/albums/ee490/Dean407/intake2.jpg (http://s1230.photobucket.com/user/Dean407/media/intake2.jpg.html)
http://i1230.photobucket.com/albums/ee490/Dean407/headlights_zps7abf0dbf.jpg (http://s1230.photobucket.com/user/Dean407/media/headlights_zps7abf0dbf.jpg.html)
http://i1230.photobucket.com/albums/ee490/Dean407/brakes_zpsb299338c.jpg (http://s1230.photobucket.com/user/Dean407/media/brakes_zpsb299338c.jpg.html)
just some notes, the brakes are basically identical to a z32 front iron setup, uses the same rotors pads and rebuild kits. the intake is only for an s14sr in an s14 chassis, can't say for sure if it will fit on other cars or not. the headlights have a small crack in the back where the part that screws in place to hold the bulb in goes (don't know the technical name) but it does not affect the function at all.
looking for $200+shipping each for the brakes and lights and $40+shipping for the intake