S13 DSS 1 piece aluminum driveshaft non abs

[SoCalDrifter]

sold
not my picture but its exactly what it looks like
http://i1.frsimg.com/images/detailed_images/DriveShaftShop_NISH20_01.jpg

[SoCalDrifter]

bump new price 350

[aga]

what's the difference with abs models? mine HAD abs, i've removed it...

[tapdeznutz]

if you still got this in acouple weeks i may pick it up. gl for now.

[90pearlz]

^^Search for more info but here is the jist. ABS diffs as well as 300zx, skyrine, etc..diffs are just a bit longer. The snout where the drivehsaft bolts to is like an inch or less longer. But to be honest with you all 1 piece driveshaft lengths are so close in length its hardly noticeable. I have an s13 coupe with a 1 piece that I got from a member who had it on a s14!! It fits perfect, no lie. I've even heard from a certain vendor that all the shafts are so similar that you can really get away with any of em. However the smart thing to do would be to purchase the correct shaft for your model. The only problem I could see is some damage to the tranny rear main but even that seems unlikely, and is an easy fix should it occur. If for seem reason the shaft purchased happen to be a little short then maybe just maybe you could damage the splines on either the shaft or the tranny output. Mine works flawlessly but maybe I just got lucky. Good luck OP

[SoCalDrifter]

what's the difference with abs models? mine HAD abs, i've removed it...

i have no idea...maybe it should work then?


^^Search for more info but here is the jist. ABS diffs as well as 300zx, skyrine, etc..diffs are just a bit longer. The snout where the drivehsaft bolts to is like an inch or less longer. But to be honest with you all 1 piece driveshaft lengths are so close in length its hardly noticeable. I have an s13 coupe with a 1 piece that I got from a member who had it on a s14!! It fits perfect, no lie. I've even heard from a certain vendor that all the shafts are so similar that you can really get away with any of em. However the smart thing to do would be to purchase the correct shaft for your model. The only problem I could see is some damage to the tranny rear main but even that seems unlikely, and is an easy fix should it occur. If for seem reason the shaft purchased happen to be a little short then maybe just maybe you could damage the splines on either the shaft or the tranny output. Mine works flawlessly but maybe I just got lucky. Good luck OP

^^this sounds like the right thing to do

if you still got this in acouple weeks i may pick it up. gl for now.

hopefully i dont haha but ok lmk when u wanna come pick it up

[HTSDesign]

this is a great deal

[89SwapXE]

where you located in ca??


Posted from Zilvia.net App for Android

[SoCalDrifter]

this is a great deal

thanks alot of interst but no one seems serious....youll definitally notice a difference in your car with this over the stock one like night and day

where you located in ca??


Posted from Zilvia.net App for Android

SoCal thousand oaks area

[SoCalDrifter]

bummmp still have this need the cash lets get it out of here

[Stayabovethelaw]

u can use abs non abs ect..... i had an abs one piece i used it with my welded diff... j30 diff and zx diff all were fine

[SoCalDrifter]

u can use abs non abs ect..... i had an abs one piece i used it with my welded diff... j30 diff and zx diff all were fine

thanks for clearing that up

[SoCalDrifter]

anymore offers???

[SoCalDrifter]

last bump someone buy this before i have to make a new thread

[petechason2]

Their set up isn't yours. http://gawab.anvtech.com/6.jpg
http://gawab.anvtech.com/7.jpg
http://gawab.anvtech.com/8.jpg
http://gawab.anvtech.com/9.jpg

[SoCalDrifter]

what's the difference with abs models?http://www.glpp.info/hu5a.jpg

im pretty sure theres a length difference between ABS and Non-ABS