Speedhut Gauges - Fully Customizable

[Broadfield]

http://www.speedhut.com/images/user/016_lg.jpg

I officially became a Speedhut dealer a little while back, just never had the time to make a for sale thread about it. It made sense for me to be a Speedhut dealer for several reasons:


Very high quality! Just as nice as Defi, Greddy, Apexi etc, but without the JDM fanboy price tag.
5-year warranty on the entire gauge(including sensor and wiring). Lifetime warranty on the electronic circuit board!
Fully customizable for no extra charge. Customization includes the following:

Face color
Font color
Font style
Illumination color
Tick style
Pointer style
Pointer color day
Pointer color night
Bezel style
Bezel color
Optional graphic
Optional logo/text


Very shallow mount with threaded body. Comes with threaded ring to secure gauge into place.
Speedhut offers an enormous selection of gauges from GPS speedos to wideband gauges for your favorite wideband setup. So if you are rocking an AEM wideband, but want the gauge to match the rest of your Speedhut setup, then you would simply buy the Speedhut wideband gauge made for AEM.
You can get optional turn signal and high beam indicators built into the speedometers.
Gauges can be custom built on Speedhut's website enabling you to see changes in real time. You can even build an 8-gauge kit with every single gauge having different customization parameters if you so choose... at no extra charge.
Speedhut offers several series of gauges, but there are four that the majority of my customers would need to concern themselves with... they are as follows:

Speedhut

Traditional-sweep dial (7-4 o'clock sweep)
Lower cost resistive pressure sensor used for all pressure gauges
Least amount of gauge types offered

Legacy

Traditional-sweep dial (7-4 o'clock sweep)
Military Grade Pressure Transducers used for all pressure gauges
Many more gauge types offered in this series than the Speedhut series

Revolution

Setable Warning LED
Peak Recall (both min and max)
Euro-sweep dial (6-3 o'clock sweep)
Military Grade Pressure Transducers used for all pressure gauges
This series offers the most amount of gauge types

Freedom

Traditional-sweep dial (7-4 o'clock sweep)
Plug-N-Play Daisy Chain Connection
Connects to 2007+ vehicle ECU (OBDII/CAN-bus system)
No additional sensors or wiring needed


All orders consisting of four gauges or more will receive an automatic 10% discount. If you are having me custom mount your gauges into a Broadfield Cluster or any other Broadfield custom fabricated location then you will receive a 12% discount on all gauges.


NOTE: Every single gauge is built-to-order. It may take 2-3 weeks before your gauge(s) are in my possession and ready for shipping. If your gauges are going into one of my custom fabricated parts, then delivery time will greatly increase and that can be discussed at anytime during the pre-order process.

Please go to their website and feel free to build a set of gauges and see what you can create:

--Build Your Gauges Here-- (http://www.speedhut.com/gauges/)

Then simply PM or email me to get a quote. I only need the part # for the gauge(s) as the price is not affected by your custom options. We will only worry about the custom options when you actually order the gauge(s) through me. Do not hesitate to PM or email me with any questions on the product.

!IMPORTANT! The largest gauge I will fit into an S13/14 cluster is a 3-3/8" gauge. My typical 4-gauge cluster setups consist of (2) 3-3/8" and (2) 2-1/16". I can fit more than four, but not when doing (2) 3-3/8". For example: I could do (1) 3-3/8" tach in the middle and flank that with (2) 2-1/16" on each side... giving a total of five gauges.

An example of a Broadfield Cluster housing Speedhut gauges:

http://images49.fotki.com/v109/photos/2/47612/9964261/IMG_3487-vi.jpg

http://images46.fotki.com/v529/photos/2/47612/12070490/IMG_0332-vi.jpg

http://images53.fotki.com/v1459/photos/2/47612/12714901/IMG_1398-vi.jpg

http://images42.fotki.com/v1483/photos/2/47612/12410551/IMG_1157-vi.jpg

http://images53.fotki.com/v1502/photos/2/47612/12714890/IMG_1373-vi.jpg

http://images53.fotki.com/v1495/photos/2/47612/12714897/IMG_1358-vi.jpg

http://images53.fotki.com/v1494/photos/2/47612/12714909/IMG_1429-vi.jpg

http://images19.fotki.com/v1612/photos/2/47612/12728062/IMG_1437-vi.jpg

[va240dude]

Pretty cool man, I may end up going this route rather than the planned setup. This looks like a sold option for a good price. Good stuff as always!

[MAD240SX]

I been wanting the Speedhut Gauges, I hope I get them sooner then later.

[brndck]

you should become a stack dealer and i will help you product test.

[r34sr]

Speedhut is great stuff, heres my custom made setup....the locking rings make installation really easy.

http://i225.photobucket.com/albums/dd253/r34sr/P1050091_zps84538ab4.jpg

http://i225.photobucket.com/albums/dd253/r34sr/P1050090_zpsca9c320e.jpg

[moowee240]

how much for those 4 guages you have in the example instrument cluster shipped to 19952

[speedgod^s13]

There are many things that makes these gauges awesome. But the one thing that stood out, is after swapping these gauges in, you can actually program your mileage, into the odometer. Really makes me consider selling my entire set of Defi gauges, and having Toby rig me up a custom cluster.

[90240sx07]

i want these the customizing sold me and not to bad on pricing time to start saving

[Broadfield]

you should become a stack dealer and i will help you product test.

Stack has basically zero for options compared to Speedhut. Stack is simply made by Autometer anyway.

how much for those 4 guages you have in the example instrument cluster shipped to 19952

What series of gauges do you want a price on? Speedhut, Legacy or Revolution?

[mtx450]

This is great news! Looking forward to getting involved with this setup soon.

[gostrider]

How much for the cluster in you post in white face ship 32905?

[Broadfield]

How much for the cluster in you post in white face ship 32905?

What series of gauges do you want a price on? Speedhut, Legacy or Revolution?

[gostrider]

What series of gauges do you want a price on? Speedhut, Legacy or Revolution?

speedhut..

[b4l]

this is a great way to spend my school check on aug love financial aid. :)

[Broadfield]

speedhut..

This is a quote for the exact setup... obviously you can add or delete options:

[b4l]

thats not a bad price is it plug and play

[Broadfield]

thats not a bad price is it plug and play

No, because you would need to mount all of the sensors from the new gauges anyway.

[moowee240]

i like the speedhut.. but i noticed it said they use a lower cost resistive pressure sensors? and the revolution has military grade. whats up with that..



What series of gauges do you want a price on? Speedhut, Legacy or Revolution?[/QUOTE]

[GSXRJJordan]

Obviously the Revolution series is higher end. You pay more for the transistor (voltage-based) pressure sensors and warning lights.

We've been selling these for years, and having them make our custom stuff. Good crew of peeps over there.

[Broadfield]

i like the speedhut.. but i noticed it said they use a lower cost resistive pressure sensors? and the revolution has military grade. whats up with that..

I'm not really sure what you are confused about. As Jeff stated, the better sensors that are included with the Revolution series gauges are going to cost more than the sensors that are included with the Speedhut series gauges. It would be like questioning why a Corvette cost more than a Cobalt. Also, the Revolution series has a programmable warning light and a peak/recall function.

[Ramonesfreak2010]

Sucks there are only boost gauges for only the revolution series.

[Broadfield]

Sucks there are only boost gauges for only the revolution series.

Not true, they have a full line of boost gauges in the Legacy series;)

[S1392sx]

are the higher quality sensors compatible with any of the series gauges? like if i were to purchase the speedhut series gauges and hopefully years from now the sensors take a crap on me. could i then purchase the better ones and they will work on the speedhut gauges?

[Broadfield]

are the higher quality sensors compatible with any of the series gauges? like if i were to purchase the speedhut series gauges and hopefully years from now the sensors take a crap on me. could i then purchase the better ones and they will work on the speedhut gauges?

That's a good question... I'll have to check with Speedhut.

[S1392sx]

Ok thanks, just let me know

[Broadfield]

Ok thanks, just let me know

I just heard back from Speedhut, unfortunately the better sensors cannot be used on the Speedhut series gauges.

Keep in mind though that the Legacy series gauges are not that much more than the Speedhut. Even the Revolution series were only $200 more than the Speedhut series for a 7-gauge set. I just happened to quote a customer for the same seven gauges in both Speedhut and Revolution.

[heychris]

Here's a question:

I am currently 4 cylinder KA-T, if I were to go vh45 or LS conversion, would I be able to recalibrate these gauges (legacy or higher) to that setup?

Cheers,
Ch

Sent using XT912 M

[Broadfield]

Here's a question:

I am currently 4 cylinder KA-T, if I were to go vh45 or LS conversion, would I be able to recalibrate these gauges (legacy or higher) to that setup?

Cheers,
Ch

Sent using XT912 M

There is no calibrating except for on a fuel level gauge and maybe some of the non GPS speedometers. The gauge is going to display whatever the sensor reads... doesn't matter what motor the sensor is on.

[GSXRJJordan]

^^^ I think he means the tach/speedo, yes, you most likely will have to recalibrate, but that's not a problem.

[bshotts]

Quick general question, are the Revolution series LED backlit i.e. "through the dial" rather than traditional bulb illumination?

[blo0d]

speedhut memorial day sale guys 15% off

https://www.speedhut.com/

just bought a 10krpm tach to go with my VVL+t setup

[Broadfield]

Quick general question, are the Revolution series LED backlit i.e. "through the dial" rather than traditional bulb illumination?

All of Speedhut's gauges are LED backlit.

speedhut memorial day sale guys 15% off

https://www.speedhut.com/

just bought a 10krpm tach to go with my VVL+t setup

So you post in my thread, but you didn't even buy the gauge from me:down:.... what gives!?!

[blo0d]

I fucked up. I thought this was a general speedhut thread. Ask modz to delete my post. Sorry man.

[Broadfield]

I fucked up. I thought this was a general speedhut thread. Ask modz to delete my post. Sorry man.

That's ok man, I just thought it was weird. I wish you would of checked with me first... I offer the same or better discounts than off of their website.

[skrouse28rs]

http://images49.fotki.com/v109/photos/2/47612/9964261/IMG_3487-vi.jpg[/QUOTE]

Broadfield - I own this speedhut cluster and would like a Boost and Oil Pressure gauge that matches it in a 52mm size. Does Speedhut make these gauges ? If so , could you give me a quote for these 2 gauges and an angled , 2 pod center vent gauge holder.

[Broadfield]

Broadfield - I own this speedhut cluster and would like a Boost and Oil Pressure gauge that matches it in a 52mm size. Does Speedhut make these gauges ? If so , could you give me a quote for these 2 gauges and an angled , 2 pod center vent gauge holder.

Yep, what is your full name and email address I can send the quote to? Also, what series of gauge do you want?... Speedhut, Legacy or Revolution? Then, what value do you want your gauges to read to? You can get both of those gauges with various ranges.

[skrouse28rs]

Broadfield - I own this speedhut cluster and would like a Boost and Oil Pressure gauge that matches it in a 52mm size. Does Speedhut make these gauges ? If so , could you give me a quote for these 2 gauges and an angled , 2 pod center vent gauge holder.

Yep, what is your full name and email address I can send the quote to? Also, what series of gauge do you want?... Speedhut, Legacy or Revolution? Then, what value do you want your gauges to read to? You can get both of those gauges with various ranges.[/QUOTE]

I want the exact Speedhut gauges shown here so that they all match. I will prob. be running about 20 - 25 boost so that gauge doesn't need to read more than 30 - 35 psi . Oil pressure in the 140-150 range should be fine. Please email me @ [email protected] . My name is Scott Krouse - please provide your paypal or preferred method of payment. Thanks

[Broadfield]

Yep, what is your full name and email address I can send the quote to? Also, what series of gauge do you want?... Speedhut, Legacy or Revolution? Then, what value do you want your gauges to read to? You can get both of those gauges with various ranges.

want the exact Speedhut gauges shown here so that they all match. I will prob. be running about 20 - 25 boost so that gauge doesn't need to read more than 30 - 35 psi . Oil pressure in the 140-150 range should be fine. Please email me @ [email protected]mail.com . My name is Scott Krouse - please provide your paypal or preferred method of payment. Thanks

I didn't sell those gauges... the customer sent them to me to put in his cluster. So I don't know if the 2-1/16" gauges are Legacy or Speedhut!?!... they will look identical. They are not Revolution because they do not have the warning light and the programming button on the front. But they could be either the Legacy or Speedhut. The only difference is that the Legacy has the military grade sensors. So it's up to you on which ones you want. I would also need to know what the illumination color is? If you want I can give you a quote on both the Legacy and Speedhut.

[skrouse28rs]

Just give me a quote for both . As far as illumination .... ?? Have not had a chance to install yet !? I was going to put them in a car that I have now sold but am building another currently that I am going to install the cluster in ?

[skrouse28rs]

Toby - gauges illuminate Blue. I went back and found the original for sale thread I bought them from. FYI

[Broadfield]

Toby - gauges illuminate Blue. I went back and found the original for sale thread I bought them from. FYI

One last question: is it the light blue or dark blue?:)

[skrouse28rs]

I have no way of knowing... so we are going with dark blue. Have actaually never seen a light blue illumination ? Thanks

[skrouse28rs]

Toby - I am a dumbass - LOL ! I have not physically held the cluster in over a year - it is at my buddies shop .Going back looking at the original for sale thread I see that the oil pressure gauge is right there in the cluster ?! Don't know why I thought it didn't have one ??? Does Speedhut make a wideband ? If so I will replace the oil gauge with a wideband. Sorry !

[Broadfield]

I have no way of knowing... so we are going with dark blue. Have actaually never seen a light blue illumination ? Thanks

Yeah, when you build the gauge on their site with black face and white font, you can choose from blue or cobalt blue... among the other colors. You can simply apply power to the illumination circuit and then ground to the ground wire to light them up to see what color they are. You can just pop the hood and do it at the battery terminals to make it easy.

Toby - I am a dumbass - LOL ! I have not physically held the cluster in over a year - it is at my buddies shop .Going back looking at the original for sale thread I see that the oil pressure gauge is right there in the cluster ?! Don't know why I thought it didn't have one ??? Does Speedhut make a wideband ? If so I will replace the oil gauge with a wideband. Sorry !

They do not have a wideband "kit" per say. What they do that is really cool is make a wideband gauge that works with all of the popular wideband kits out there. So you buy what ever wideband you want, AEM, NGK, Innovate etc, then buy the appropriate Speedhut gauge to work with it. Then all of your gauges will match instead of having a random AEM gauge etc. So just make sure to buy a wideband that Speedhut has a match for.

[GSXRJJordan]

^^^ Yup, I use the Zeitronix ZT3 or AEM Inline UEGO controller with the Speedhut gauge when I want them all to match, and it's still about the same price as getting a "wideband kit" with one of those manufacturers gauge faces.

[skrouse28rs]

Toby - the gauges are cobalt blue. I was able to talk with Jared who originally sent you the gauges . So if you could give me a quote for a boost gauge , wideband gauge and angled center vent pod in cobalt blue , both Speedhut and Legacy series , I would appreciate it. Thanks.

[Broadfield]

Toby - the gauges are cobalt blue. I was able to talk with Jared who originally sent you the gauges . So if you could give me a quote for a boost gauge , wideband gauge and angled center vent pod in cobalt blue , both Speedhut and Legacy series , I would appreciate it. Thanks.

Copy that, I'll get a quote sent over to you tonight!

[Broadfield]

Toby - the gauges are cobalt blue. I was able to talk with Jared who originally sent you the gauges . So if you could give me a quote for a boost gauge , wideband gauge and angled center vent pod in cobalt blue , both Speedhut and Legacy series , I would appreciate it. Thanks.

Quote sent on the Legacy series. I forgot that they do not offer a boost gauge in the Speedhut series. Also, they do not offer a oil pressure gauge that goes up to 150psi in the Speedhut series.... only 100psi. So I obviously only sent you the one quote for the Legacy series. Please let me know if you have any other questions.

[Broadfield]

Thanks for the purchase skrouse28rs!

[Wave_s13]

Interested in some gauges, but need to know if the s13 cluster will fit 3 x 3 3/8" gauges? These gauges does not have a main unit they all link to (like defi) and just connect to the sensors directly?

GRM338-QUAD-01
GRM338-GPS-03T
GR338-TACH-03

PM me a price for these please and thank you!

[Broadfield]

Interested in some gauges, but need to know if the s13 cluster will fit 3 x 3 3/8" gauges? These gauges does not have a main unit they all link to (like defi) and just connect to the sensors directly?

GRM338-QUAD-01
GRM338-GPS-03T
GR338-TACH-03

PM me a price for these please and thank you!

Can you give me your full name and email address so I send you a quote? My invoicing/quote software sends it through email. Also, what is your zip so I can give you an accurate shipping quote? I will check my S13 cluster plate today to make sure it will fit (3) 3-3/8" gauges. I'm pretty sure it will, but I have never done it before. Are you having me do the cluster or are you doing it yourself?

Edit: it will be tight, but (3) 3-3/8" gauges will fit into the S13 cluster.