bing
04-29-2013, 09:32 PM
I'm not a member of any FD or S2K boards so posting these here since they wont fit over a big brake kit i bought.... i will ship them in the continental US.
17x10.5" and 17x12" offsets approx +40 /+55 which means you'll need to take a trip through spacerville.
matte grey face, machined brush finished lip, gloss black back-barrels, 2 extra barrels and 2 extra lips.
http://www.bings.ca/images/parts/CCW%20rebuilt%20(1).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(2).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(3).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(4).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(5).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(6).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(7).JPG
$2,400 now.
ideal for FD or S2k but if you're a mega-boss you can fit them on a 240sx.
i had the 10.5"s on the rear of my s13 with a 10mm spacer with 275/40/17's and it wasn't even that bad (pulled fenders though).
all of the lips are the same spec, it's the barrels that are taller or shorter.
the extra barrels and lips need repair. the barrels have some cracks in them from hard street driving over the years. you can weld them up and roll again. they will make 9.5" rims on these lips. i had the 9.5's up front on my s13 with spacers.
These wheels came off the playboy racing 350z a number of years ago and came up to Canada when Sasha of SG Motorsport bought their car and all of the associated parts; of which these were one of 3 or 4 sets of CCW's that came with it.
17x10.5" and 17x12" offsets approx +40 /+55 which means you'll need to take a trip through spacerville.
matte grey face, machined brush finished lip, gloss black back-barrels, 2 extra barrels and 2 extra lips.
http://www.bings.ca/images/parts/CCW%20rebuilt%20(1).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(2).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(3).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(4).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(5).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(6).JPG
http://www.bings.ca/images/parts/CCW%20rebuilt%20(7).JPG
$2,400 now.
ideal for FD or S2k but if you're a mega-boss you can fit them on a 240sx.
i had the 10.5"s on the rear of my s13 with a 10mm spacer with 275/40/17's and it wasn't even that bad (pulled fenders though).
all of the lips are the same spec, it's the barrels that are taller or shorter.
the extra barrels and lips need repair. the barrels have some cracks in them from hard street driving over the years. you can weld them up and roll again. they will make 9.5" rims on these lips. i had the 9.5's up front on my s13 with spacers.
These wheels came off the playboy racing 350z a number of years ago and came up to Canada when Sasha of SG Motorsport bought their car and all of the associated parts; of which these were one of 3 or 4 sets of CCW's that came with it.