PDA

View Full Version : NY FS S13 Silk Road RMA/8


apoopoo999
04-28-2013, 10:12 PM
I have a set of SIlk Road RMA/8 forsale, The 2 rear struts are in good condition, The front passenger side is good, the height adjustment perch on the front driver side is seized. The perch is pretty beat up (I didnt do it), I dont have the spanners so I didnt attempt to loosen it. The rest of the strut is in good condition, The adjusting dials on all 4 struts turn freely. These were on my 91 240 when I purchased the car. They work fine and are not blown but sit pretty high (about 2" gap from tire to fender) Im selling then cheap $350 pick up in NYC shipping is extra

http://imageshack.us/a/img195/6623/img3124mo.jpg

http://img29.imageshack.us/img29/601/img3125o.jpg (http://imageshack.us/photo/my-images/29/img3125o.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img163.imageshack.us/img163/4813/img3126bu.jpg (http://imageshack.us/photo/my-images/163/img3126bu.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

chiboy002
04-29-2013, 12:18 AM
a great way to break that collar loose is either put the thing in a vice (wrap threaded shock in tshirt and clamp it), buy a shitty spanner wrench/pipe wrench, and then put a jack handle on it and turn it

or put it back on the car then hit it with a dulled up chisel and a mallet in both directions with PB blaster at it. a dull chisel is essential so you don't cut into the collar and then fuck it all up

apoopoo999
04-29-2013, 11:15 AM
a great way to break that collar loose is either put the thing in a vice (wrap threaded shock in tshirt and clamp it), buy a shitty spanner wrench/pipe wrench, and then put a jack handle on it and turn it

or put it back on the car then hit it with a dulled up chisel and a mallet in both directions with PB blaster at it. a dull chisel is essential so you don't cut into the collar and then fuck it all up

Thanks for the advice, If I had a workbench with a vise bolted to it I could probably break the collar free with a large pipe wrench but I dont have the proper tools.

hks4life
04-29-2013, 01:20 PM
how much shipped to 30052

JZ33
04-29-2013, 06:48 PM
shipped to 95677 please?

apoopoo999
04-30-2013, 05:36 AM
Sale is pending

apoopoo999
04-30-2013, 05:06 PM
Sold...........