Fully built sr20det swap gtx3071, haltech with 50 miles

[silviaNC]

Testing waters, just got out of the dyno and everything is done, turn key swap rdy to go. 50 miles on it.
Considering parting out or full swap.
Have way more than that invested. Will include ic piping bov as well.
Now that swap is complete I'm thinking on moving on to the next project
Built s13 sr20det
Block:
Crower rods
Cp pistons 8:5:1
Blanced crankshaft
Acl bearings
Mazworks main studs
Arc oil pan

Head:
Cometic head gasket
Arp studs
Port job
Supertech valves
Springs and retainers
Hks 272 step 2 cams and hks cam gears
Ras
Custom intake manifold with q45 tb
Nismo 740cc inj. Flow tested amd cleaned

Turbo:
Pretty much new gtx3071r t3 twin scroll .83 garrett
Turbo smart 38mm wg
Egay top mount manifold (only knock off part on this built and needs to be upgraded to turn up boost)

Drivetrain
Sr tranny with act streetlite flywheel
Competition clutch stage 4 and pressure plate.
Shaftmasters 1 pc aluminum ds

Electronics
Haltech ps 1000 and wiring specialties upper amd lower harness,





Including koyo rad, alum fan shroud, and.a.few more.goodies
http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130426_125436_zps438d66b0.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/photo_zps6b306ec3.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130105_080400_zps6dc5ec52.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130127_142120.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130118_122812.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120904_203403.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-21_10-52-53_56.jpg


http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-20_18-23-44_291.jpg


http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-21_17-33-59_892.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-06-21_12-26-59_882.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-05-09_14-59-09_317.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/240sx%20Project/2012-05-10_10-21-50_545.jpg

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20120801_174810_zpsea883fad.jpg

[zombiewolf513]

Willing to part out the Haltech PS1000?

[silviaNC]

Willing to part out the Haltech PS1000?

Not parting out right away. Will give it a few before doing so. If I do I will be selling it as a pkg
Haltech ps1000
S13sr patch loom
Upper engine harness with air temp amd map conversion by wiring specialties.
Everything is basically new. Inclusing gm 3.5 bar map sensor and air temp sensor.
It also includes boost/ign/fuel trim box +- 50% adj.

[efaustin]

if you do part id be interested in the gt30, the manifold, the wastegate, the injectors just to let you know

[funktown240]

How much power did it make?

[silviaNC]

if you do part id be interested in the gt30, the manifold, the wastegate, the injectors just to let you know

Ill keep you updated. this turbo has less than 50 miles. I will also drop the oil/water lines, restrictor
and blanket. I don't recommend the manifold but ill give it to you. Can't boost over 17psi because starts giving boost creeps.




How much power did it make?
Keep in mind this is a high boost build and due to the egay manifold couldn't past over 17 psi.
Car made [email protected] on superflow dyno
Wich is usually lower #s than other dynos
Full boost at 4k that's w/o the twin scroll manifold.once manifold is upgraded and bring boost up 24-26 psi ull get well over 400hp and full boost at least 3.7k rpms. Swap is well built and will hold it easily
I just ran out of funds and can't afford the upgrade.
They did more than 30 passes and not one drop of oil on the catch can.

[S13drifterr18]

what is your next project??

[silviaNC]

what is your next project??

Going to build a turbo ls1 when I get the funds

[Kinda-Important]

if you do part out i am interested in turbo as well.

[anthonyr sil8ty]

Intake manifold with tb, how much?

[b4l]

If you do decide to part I would be interested in the harness

[silviaNC]

Well guys my other deal fell through so swap will stay on car till I finish paint job. Need a engine on car to move it in and out of the garage. Will post it again in a few weeks. Will not put more than half a mile on it I promise lol

Will also trade full swap for 1-2jzgte swap for s chassis. Will add cash if it has mods

http://i973.photobucket.com/albums/ae219/gsxr750_photo/20130504_153001_zps15d5a16d.jpg


Video of cold start and idle.
https://www.youtube.com/watch?v=iYXgjTL3Vt4&feature=youtube_gdata_player

[street_sleeper]

If you part out I am interested in your long block, no manifolds so on. Just the head and the block.

[silviaNC]

Will start part out once big parts go
Pm /txt with questions 9196283544
Please dont waste my Time and if u don't have money don't lowball me and get yourself some ebay parts

[silviaNC]

Bump!!!!!!

[silviaNC]

[QUOTE=copichael7;5309483]

[powahousealex]

might be interested in the whole turbo setup , please pm me if you want to move this fast

[street_sleeper]

This motor may have found a new home. Aka my engine bay lol

[silviaNC]

Break in tune on superflow dyno 335-365/16psi. Keep on mind build is set up for 24+ psi. So pretty much dyno #s are not relevant but I will still post it. Is like feeding vegetables to a lion at current psi. Adjusted intake manifold price

[801nismo104]

im interested in the clutch. how many miles are on it? are u sure its a stage 4? looks like a stage 3

[silviaNC]

[QUOTE=801nismo104;5309630]im interested in the clutch. how many miles are on it? are u sure its a stage 4? looks like a stage 3[/QUOTE
50 miles. To be specific is what they call a 3.5 and hold 525 tq.

[SupaDoopa]

How about a complete package price?

[silviaNC]

I would do $5500 for the swap

[801nismo104]

im interested in the clutch i texted you

[monkichi57]

Is the long block available? PM me if so.

[brainfood]

Looking to part the Haltech and patch?

[Freddy]

Free Bump, just want to know if you have a dyno sheet.

[zenki 95]

Texted!!!!!!!!!!!!! Free bump

[enriquetc240]

Please PM me price of the long block please.


Thanks!

[kevinintegra]

Trade ya a Garrett gt35r for your gtx30

[SupaDoopa]

PM me a price if you're willing to ship the head.

[silviaNC]

Guys starting a new thread. Car is finaly back from body shop after this long as time. Everything will come off next thursday. Already put 800 miles on longblock. Was broken in properly.

[Dirtcanhurt089]

How much for just the turbo ?

Sent from my HTC VLE_U using Tapatalk 2

[silviaNC]

How much for just the turbo ?

Sent from my HTC VLE_U using Tapatalk 2

Check my other thread. Will not.partout until long block is sold