Full SR20DET Partout - Top to Bottom - Lots of aftermarket goodies

[PW180SX]

everything is sold!

[KevinEdgar]

Can I get a price shipped to 94539 for the following: T25, non hicas ps pump w/ bracket, alt w/ bracket, cs aluminum pulleys.

maybe you can throw in an oil block and motor mount brackets ;)

[othondls]

How much for the complete swap

[joker1984]

http://images.craigslist.org/3Ed3Jb3H55N65La5Mad4sf1f54bf5f8b31e40.jpg
Hey everyone! I'm going a different route on my car and I have no need for all of my SR parts. All aftermarket parts were purchased brand new and never driven on or even started. Fresh machinework on the block and crank. Please don't lowball, but any reasonable offer will not be ignored.

I will ship all parts except the block, transmission and head unless I have a serious buyer. Just contact me for a shipping quote!

All parts are coming off my 180 as pictured. The motor was built and thrown in, but never ran! Everything is coming out and taken apart today. If you want any pictures of any specific part, just let me know and I will get them to you!

Engine:
SR20DET Head - Complete w/ valvetrain - valve cover - 200$
SR20DET Block - Bare - Fresh hone & hot tanked - 80$
SR20DET Transmission - 100$
Micropolished SR20DET Crankshaft - 100$
ARP Headstuds - 80$
Double thick custom Tubular Manifold w/ heatwrap - Fits stock turbo - 80$
Stock T25 - Great condition, almost no shaftplay (will come with stock lines) - 100$
Braided Oil & Coolant Lines - 50$
SR20DET Valve Cover - Fresh Paint - (Comes with brand new gasket) - 100$
BC 264 Cams (Fits S14 & S13 SR20's)- Brand New - 300$
S14 Oil Pickup - Brand New - 25$
Oil Dipstick - Brand New - 12$
Oil Dipstick Tube - Brand New - 10$
SR20DET 02 Sensor - Brand New - 55$
Circuit Sports Rocker Arm Stoppers - 50$
CAS Sensor - Broken Tab but still fits just fine - 75$
OEM S13 SR20DET Engine Harness - Comes with lower trans harness - 200$
Coil Pack Harness - OEM - 40$
(4) OEM Coilpacks - 80$
SR20DET Non-Hicas power steering pump w/ bracket -- 100$
SR20DET Hicas Power Steering Pump w/ bracket -- 100$
SR20DET Alternator w/ Bracket -- 75$
SR20DET Throttle Body w/ S14 Aluminum pulley -- 50$
Ignitor Chip -- 25$
OEM S13 driveshaft -- 50$
SR20DET ECU #62 with BearPaw Chip -- 125$
SR Timing Chain Kit -- Brand New chain slack bracket and hardware -- 75$
SR Oil Pump Cover -- 70$
OEM SR20DET Sidemount Intercooler setup - Complete - 100$
OEM SR20DET A/C Setup - 75$

Any extra plumbing, sensors or brackets, let me know. I probably have them!


SR Extras:
ISIS V2 Short Shifter - Brand New - 65$
Greddy Oil Filter - Brand New - 15$
Tomei Oil Filler Cap - Brand New - 30$
SPEC Stage 1 Clutch Kit - Brand New - 250$
Nismo Flywheel - 200$
ISIS SR20 Hotpipe w/ HKS Flange - Brand New - 75$
ISIS Intake w/ Z32 MAF adapter - Brand New - 120$
CX Racing Turbo Outlet Pipe - Brand New - 50$
SR20 Downpipe - Brand New - 60$
SR20 S13 CMS Aluminum Radiator - Brand New - 100$
Freddy Intake Manifold - Brand New - 80$
Freddy Oil Pan - Brand New - 60$
Solid SR Transmission Mount w/ Hardware - 50$
SR20 Coil Pack Cover - Brand New - 50$
Circuit Sports Aluminum Blue Pulleys - Alternator, PS and water pump - 70$
Votion aluminum FMIC -- 100$


Gaskets:
OEM Valve Cover Gasket -- BNIB - 20$
Circuit Sports 7 Layer Exhaust Gasket -- Brand New - 24$
OEM Throttle Body Gasket -- BNIB - 10$
OEM Intake Manifold Gasket -- 15$

Other Parts for sale:
Black Personal Steering wheel -- has a hole drilled in the left spoke by previous owner, not sure why. Hence the low price! - 60$

Let me know what you're interested and I'll get you pics! Once all the parts come off new pics will be taken and posted on here. I apologize if this isn't within compliance with the rules, if it is, I'll post this FS thread later on!

All items located in Colorado Springs, CO if you are local and want to come pick any parts up.
Post here or PM me, thanks!
Greyson

do you have an hydrolick lifters?

[mr.nismo.]

Alternator tensioner?

[joker1984]

i need a pass side kouki head light jdm my glass is craked to hell on mine

[PW180SX]

Can I get a price shipped to 94539 for the following: T25, non hicas ps pump w/ bracket, alt w/ bracket, cs aluminum pulleys.

maybe you can throw in an oil block and motor mount brackets ;)

I can do $370$ shipped & insured for everything. I have a guy that wants the mount brackets, but I suppose I can throw in an oil block for ya.

How much for the complete swap
I'll sell everything outright for 3 Grand with everything SR included.

do you have an hydrolick lifters?
I do, but they will be included with the complete head.

Alternator tensioner?
I'm trying to sell this bracket with the alternator itself

[jdo180]

hey im local and may be interested in picking up everything ..pm me

[PW180SX]

hey im local and may be interested in picking up everything ..pm me

PM'd, and all other PM's replied.

[Alan_405]

Pics of intake kit please

[PW180SX]

Here's the intake. (won't come with MAF unless purchased along with it)
http://farm8.staticflickr.com/7046/8690859460_f9e261c8ac_z.jpg
Fits perfectly and looks great.

[KevinEdgar]

I can do $370$ shipped & insured for everything. I have a guy that wants the mount brackets, but I suppose I can throw in an oil block for ya.


PM me your paypal.

[Bullitt_180sx]

SR hicas power steering pump and bracket shipped to 33716 please?

[PW180SX]

PM me your paypal.
PM'd

SR hicas power steering pump and bracket shipped to 33716 please?

I'll do $115 shipped & insured with tracking information.
Let me know, PM me for my paypal details.

[Adam496]

Interested in- s14 Oil Pickup - Brand New - 25$
SR Timing Chain Kit 75$
OEM Valve Cover Gasket -- BNIB - 20$
ISIS Intake w/ Z32 MAF adapter - Brand New - 120$
Also, are you willing to sell one Coil pack?

Shipped to 07480

[street_sleeper]

crank shaft shipped to 78626? I know its heavy but I might be needing one if the damage is to bad to polish out of mine

[PW180SX]

Interested in- s14 Oil Pickup - Brand New - 25$
SR Timing Chain Kit 75$
OEM Valve Cover Gasket -- BNIB - 20$
ISIS Intake w/ Z32 MAF adapter - Brand New - 120$
Also, are you willing to sell one Coil pack?

Shipped to 07480

PM'd

crank shaft shipped to 78626? I know its heavy but I might be needing one if the damage is to bad to polish out of mine

I actually have local buyer for the longblock including the crank, so thats pending at the moment. If he doesn't go through I'll let you know!

[PW180SX]

Sold Parts list updated.

[S13drifterr18]

text me 9736683187 im interested in the SR20DET ECU #62 with BearPaw Chip and OEM Turbo manifold + heat shield - 60$

[penco]

Wiring harness in good shape and do you have any pics? Also what kind of maf do you have and whats your paypal info? $200 shipped to 53223?

[frost1988]

Brand new?unused?

[s13mikesr20]

Rad hoses and clamps please shipped 89113

[flaku]

intake manifold shipped to 33496? pm me thanks

[PW180SX]

text me 9736683187 im interested in the SR20DET ECU #62 with BearPaw Chip and OEM Turbo manifold + heat shield - 60$
Sent you a text.

Wiring harness in good shape and do you have any pics? Also what kind of maf do you have and whats your paypal info? $200 shipped to 53223?
PM'd

Brand new?unused?
What are you asking about?

Rad hoses and clamps please shipped 89113
PM'd

intake manifold shipped to 33496? pm me thanks
I have a buyer in line for it, just waiting payment.

[PW180SX]

OEM Manifold + heatshield, intake manifold and transmission mount sold!

[PW180SX]

Evening bump. Motor is coming out, all paid orders will be shipped and with all the remaining parts there will be pictures posted of everything.

PM me for anything in particular!

[wangan_cruiser]

how much for the aluminum intake pipe shipped to 94501?

[brndck]

I'm interested in the wiring harness if its clean and not all hacked up.

[PW180SX]

how much for the aluminum intake pipe shipped to 94501?
Sorry, sold!

I'm interested in the wiring harness if its clean and not all hacked up.
I actually just sold it, sorry!

Sold parts listed updated.



EDIT: Lots of pics just added!

[PW180SX]

Morning bump

[bewsted]

Interested in the oil and coolant lines and the cams shipped to 08205. PM please

[litch]

pm price on wheel shipped to 31904

[PW180SX]

Interested in the oil and coolant lines and the cams shipped to 08205. PM please

pm price on wheel shipped to 31904

PM'd both of you guys!

[PW180SX]

Bump it up

[superadvan]

Braided turbo lines shipped to 96720 ?

[moonkid]

how much for the intake and exhaust gaskets shipped to 27101?

[PW180SX]

Braided turbo lines shipped to 96720 ?

how much for the intake and exhaust gaskets shipped to 27101?

Both PM'd!

[kinkcycle128]

bc 264s shipped to 98466?

[Tye132]

Alternator shipped to 93245?

[PW180SX]

bc 264s shipped to 98466?
PM'd

Alternator shipped to 93245?

Alternator has been sold, sorry.

Parts sold list updated!

[PW180SX]

Bump, still lots of things for sale. List is up to date!

[PW180SX]

To the top!

[kevinintegra]

100 shipped to 83617 for the the cms radiator? pm me
or text 208-365-8946

[PW180SX]

PM'd.

A few goodies left, get them while you can! Accepting best offer.

[s14fbs]

1st what cold pipe are your running in that pic

2nd how much for the samco hoses shipped to 32927

[PW180SX]

It's the enjuku cold pipe to work with greddy intake manifolds, and 65$ shipped for the hoses. Pm me if interested.

[BrokenDiamond]

FMIC, shipped to 57006? Thanks

[PW180SX]

PM'd, and Samco hoses sold. List updated

[manny325]

still got the clutch

[PW180SX]

Yeah clutch is still available.

[manny325]

Does that come with realese bearing and alignment tool. If so will u take 180 shipped to 76904

[PW180SX]

I PM'd you.

List updated again

[PW180SX]

List updated with new parts added, new pictures added, and sold parts updated.

[DennisC]

Does the oil pan come with all the hardware?

[blank240]

Is $50 for the iacv shipped?? If not then shipping to 54401 please, thanks

[PW180SX]

Does the oil pan come with all the hardware?

Yes, all hardware included. PM'd

Is $50 for the iacv shipped?? If not then shipping to 54401 please, thanks

PM'd also

[PW180SX]

Sold parts list updated again!

[penco]

Can you do $75 shipped on the starter? Mine just went out after I got the wiring harness you sent.

[PW180SX]

Yeah I can do that, PM'd!

[applefrk15]

still have the hard coolant line under the intake mani? pm me if you do please!

[chuki.s13.coupe.]

Still have that sohc maf w/elbow?

[PW180SX]

Yeah Maf/Elbow still available