mysharonna
04-25-2013, 12:51 PM
Here are a few items I won't be needing anymore. Feel free to check my feedback for my positive sales records.
All parts are in used condition. Don't expect them to be perfect. That being said, they are all in good working condition with only cosmetic blemishes.
Buyers responsible for shipping and paypal fees. If you want to combine items please PM me and we can work out an adjusted price.
SR20DET turbo setup
Garrett gt2871r .64 ball bearing turbo (A few thousand miles use, mostly sat around. Typical shaft play without oil in bearings. Waste gate welded shut)
oem exhaust manifold
Greddy turbine outlet
Tial 38mm waste gate with 7 psi spring and dump pipe (dump pipe isn't pretty but it works!)
almost new redtop o2 sensor
stainless coolant and oil lines with DEI sheilding (were used with my s14 water neck for coolant line routing. will include fittings for block)
oem oil drain tube with heat sheilding
will include manifold and wastegate gaskets (HIGHLY RECOMMEND USING NEW ONES)
was installed on s14 chassis with auto sized brake booster but should fit any s-chassis
Price - SOLD
Enthalpy #62 redtop ecu tuned for:
z32 MAF
650cc injectors
gt2871r setup
full 3" exhaust
Retail is $399
You can have it re-tuned for $150
Price - SOLD
DeatschWerks sr20det 650cc oem style injectors
only used a few thousand miles
oem fitment
includes OEM fuel rail
includes newer fuel rail seals and spacers
Retail is $400
Price - SOLD
Greddy sr20det high capacity oil pan
Only cosmetic blemishes
Does not include sensor
Includes hardware
Retail is $375
Price - SOLD
S13 Blacktop sr20det oil strainer pickup
Hardly used
Like new condition
Much better design than redtop oil pickup
Retail is $60
Price - $30
http://i615.photobucket.com/albums/tt235/at_ecd/DSC_4448.jpg
http://i615.photobucket.com/albums/tt235/at_ecd/DSC_4451.jpg
S14 oem upper water neck outlet
Combine with my turbo kit for easy coolant line routing
Retail is $160! look it up lol
Price - SOLD
All parts are in used condition. Don't expect them to be perfect. That being said, they are all in good working condition with only cosmetic blemishes.
Buyers responsible for shipping and paypal fees. If you want to combine items please PM me and we can work out an adjusted price.
SR20DET turbo setup
Garrett gt2871r .64 ball bearing turbo (A few thousand miles use, mostly sat around. Typical shaft play without oil in bearings. Waste gate welded shut)
oem exhaust manifold
Greddy turbine outlet
Tial 38mm waste gate with 7 psi spring and dump pipe (dump pipe isn't pretty but it works!)
almost new redtop o2 sensor
stainless coolant and oil lines with DEI sheilding (were used with my s14 water neck for coolant line routing. will include fittings for block)
oem oil drain tube with heat sheilding
will include manifold and wastegate gaskets (HIGHLY RECOMMEND USING NEW ONES)
was installed on s14 chassis with auto sized brake booster but should fit any s-chassis
Price - SOLD
Enthalpy #62 redtop ecu tuned for:
z32 MAF
650cc injectors
gt2871r setup
full 3" exhaust
Retail is $399
You can have it re-tuned for $150
Price - SOLD
DeatschWerks sr20det 650cc oem style injectors
only used a few thousand miles
oem fitment
includes OEM fuel rail
includes newer fuel rail seals and spacers
Retail is $400
Price - SOLD
Greddy sr20det high capacity oil pan
Only cosmetic blemishes
Does not include sensor
Includes hardware
Retail is $375
Price - SOLD
S13 Blacktop sr20det oil strainer pickup
Hardly used
Like new condition
Much better design than redtop oil pickup
Retail is $60
Price - $30
http://i615.photobucket.com/albums/tt235/at_ecd/DSC_4448.jpg
http://i615.photobucket.com/albums/tt235/at_ecd/DSC_4451.jpg
S14 oem upper water neck outlet
Combine with my turbo kit for easy coolant line routing
Retail is $160! look it up lol
Price - SOLD