camber plates

[citizen]

Anyone have a picture of cusco camber plates with the extra hardware, i.e. the nut and drift, and or know where to purchase the hardware separately?

[LigouriRd]

My camber plates came with a custom nut (hex on top, round where it fit into the pivot ball) and a spacer. I can take a pic if you need it. You are prolly gonna have to get the hardware from cuso.
I wonder...do your camber plates not fit or seem like you are missing some hardware. I initaily got the CUS-220410A ("a" for after market) and they seemed to be missing a spacer cause the plate wouldnt clear the upper spring perch. It turned out i needed CUS-220410S (standard) to fit with my oem style (koni cartiges) struts.

[meme]

did you guys need to use the spacer?

[LigouriRd]

The CUS-220410S (standard) still needed the spacer, it just had a different spacer. The piece that held the pivot ball was attached to the camber plate differently.

[citizen]

What is the visual and technical diferences between the two models?

[LigouriRd]

http://www.projectnissan.com/ProductCart/pc/catalog/cusco/cus-pillowMtF.jpg
See that black piece in the middle of the blue plate, on the "s" version the pivot ball (ball in the centre of the black peice) further away from the blue piece. The black piece has a flange with four tapped holes on one side and a shoulder around the pivot ball on the other. I think that on the "s" version the shoulder is supposed to be below the flange (putting the ball further away from the blue piece) and the "a" version is opposite. I briefly had in my possession both versions but I didn't take em apart to compare. Either way the spacers shown in the bottom of the pic (they are really hard to see) are slightly longer in the "s" version.

What kind of struts do you have, coilovers or the origonal nissan (tokico) ones?