**RARE OLD SCHOOL WRD D5 5x114.3 17X9 1/2 ALL AROUND +52 offset ALL AROUND

[louie661]

new thread

[dudermagee]

Dude those offsets don't sound right for a 6.5" barrel with a 3" lip

[Purestock240]

yea the offset doesnt look right.

[FaLKoN240]

If it was like a 0 disc it could be that high hahaha

[louie661]

Dude those offsets don't sound right for a 6.5" barrel with a 3" lip

:picardfp:

[Thaiboy]

I'm assuming that offset was before you got the new lips?
How big were the old lips?

Beautiful wheels though. I'll probably shoot an offer pending confirmation of offset. I'm in the market for high offset, wide wheels...

[louie661]

I'm assuming that offset was before you got the new lips?
How big were the old lips?

Beautiful wheels though. I'll probably shoot an offer pending confirmation of offset. I'm in the market for high offset, wide wheels...
yes thank you..inner barrel offset did not change its still at +52 all around....outer lip just got wider to 3 more inches...offset is from inner face to outside..face still sits the same as before with inner barrel.yes the inner barrels measure at 6 1/2"..face fits in between the two barrels,not on top of both barrels..

old lips were 1 inch

[louie661]

new thread

[Purestock240]

NO! you're wrong

[dudermagee]

yes thank you..inner barrel offset did not change its still at +52 all around....outer lip just got wider to 3 more inches...offset is from inner face to outside..face still sits the same as before with inner barrel.yes the inner barrels measure at 6 1/2"..face fits in between the two barrels,not on top of both barrels..

old lips were 1 inch

That would mean your wheels are 17x9.5 +28.....
:picardfp:

[louie661]

That would mean your wheels are 17x9.5 +28.....
:picardfp:hmmm..how do u figure..inner barrel still the same, face still measures the same inside out....dont u measure offset from inside of center face to outside....if im wrong i apoligize and thank you for the corrections...i will fix ad

[Thaiboy]

yes thank you..inner barrel offset did not change its still at +52 all around....outer lip just got wider to 3 more inches...offset is from inner face to outside..face still sits the same as before with inner barrel.yes the inner barrels measure at 6 1/2"..face fits in between the two barrels,not on top of both barrels..

old lips were 1 inch

Gotcha.

http://i82.photobucket.com/albums/j260/WORLDONE/Arrrmin/wheeloffsetdiagram.jpg

Offset changes when the width of the wheel changes. ;)

More specifically, for every inch wider/narrower, the offset changes by ~12mm
http://4.bp.blogspot.com/-itIbJpoTAZg/Tw8UkII-NNI/AAAAAAAAAEM/x3cfhUK2tno/s1600/MaxWheelOffsetChartbyCodyGCarson-767112.jpg

This is how dudermagee got +28 offset.

+52 - 24 (since you went 2" wider) = +28

Hope that helps! :D

[sidewayz240]

Offset is measured from the centerline (0 offset) of the wheel between the inner and outer lip. When you resize either barrel, the centerline of the wheel moves. A one inch addition to the outer barrel moves the offset 12.7mm (1/2 inch) inward, so in your case by adding 2.5 inches to the outer lip your moving the offset 31.75mm closer to the centerline (0 offset). Resulting in a wheel with the specs of 17x9.5 +20.25.

Great looking wheels though!

[louie661]

Offset is measured from the centerline (0 offset) of the wheel between the inner and outer lip. When you resize either barrel, the centerline of the wheel moves. A one inch addition to the outer barrel moves the offset 12.7mm (1/2 inch) inward, so in your case by adding 2.5 inches to the outer lip your moving the offset 31.75mm closer to the centerline (0 offset). Resulting in a wheel with the specs of 17x9.5 +20.25.

Great looking wheels though!
THANKS AND THANKS FOR THE HELP ON THE WHEEL SPECS..APPRECIATE IT.

i guess the wheels specs are 17x9 1/2 all around with a +20 offset....i will give a final measure when they are finally sealed up...thanks

[sidewayz240]

Shit, for some reason I thought you said the lips were 3.5 inches. With a 3" lip it'll put the offset at +26.6, my bad.

[g35gabby]

curious what you want for them.

[louie661]

curious what you want for them.
well, ill put it this way....i spent about 1k on 4 3 inch lips,powdercoat, and time...if i put a price...i think they will be at 1800 no less for wheels without tires...its a rare set and nice wheels..looks better in person.

[1gr8bar10der]

well, ill put it this way....i spent about 1k on 4 3 inch lips,powdercoat, and time...if i put a price...i think they will be at 1800 no less for wheels without tires...its a rare set and nice wheels..looks better in person.

That's a fair price if you ask me. Free bump for some rarity.

[Laotian240]

NICE they look good with the gold powdercoat. The lips seem shinnier since when I gave them to you

[louie661]

NICE they look good with the gold powdercoat. The lips seem shinnier since when I gave them to you
lol...they are semi polished now,not done yet.just a sneak preview..i got the lips raw from you which i should have got them polished from you..i fucked up and spent more cash on polishing lips..oh well.im very happy with the results so far though.


yeah i think 1800 firm is a good price....they are not for sale yet but if sumone will pay 1800 i guess i can let them go...they will be done in about a week or so.

[louie661]

That's a fair price if you ask me. Free bump for some rarity.
thanks man

[Laotian240]

Lol if you met my price I wouldve'polished them I told you I was giving you a GREAT deal ahahaha

[louie661]

Lol if you met my price I wouldve'polished them I told you I was giving you a GREAT deal ahahahalol...i know.didnt realize till i found out how much polishing was gonna be.thanks for the lips though..they fit perfect.

[Laotian240]

lol...i know.didnt realize till i found out how much polishing was gonna be.thanks for the lips though..they fit perfect.
Ahaha its cool. Your welcome. Dude i want to see them on your car. But if you sell for 1800 that be good.

[louie661]

Ahaha its cool. Your welcome. Dude i want to see them on your car. But if you sell for 1800 that be good.

yeah they look ok on my car but i may have to run wide body and dont want to do that...