PDA

View Full Version : lot o stuff turbo&300zx brakes


meatman10523
04-18-2004, 10:18 AM
TIME TO CLEAN OUT UNDER THE DECK this is stuff i have had laying around for a while and it needs to go, most ppl wont want some of it but incase you do

s14 and s13 dohc exhaust manis
s14 flywheel
sohc intake mani
sohc head
sohc block-(minus pistons)
s13 dohc motor-seized, kinda want to keep the head and the intake mani but for the right price i will let them go
3 subaru steelies with tires
stock exhaust
1 s13 open diff
1 s14 open diff (its an s13 with a j30 rear cover should fit s14)
open diffs are good if you want 2 weld them.
s13 stock springs
on that stuff just make me an offer and its pretty much yours

good stuff
300 zx brakes, nice pads(cant remeber brand but they are like 45 bucks perforemce pads) rotors drilled to 4 and 5 lug (all you need is 40 dollar lines from spl and you have the swap)
VR-4 turbo....i think its from a vr-4 getting it checked on right now
s13 cheap drop spring sleeves, good for eibach ERS springs or if u want 2 slam a car

make me an offer on any of it iam just trying to get rid of everything. The turbo and brakes are worth something so i might not be as willing 2 sell them cheap but if you make me an offer i cant refuse they are yours
best thing to do is e-mail me as i dont check the forums 2 often
[email protected]

WILDACEX187
04-18-2004, 11:22 AM
how much for the flywheel?

meatman10523
04-18-2004, 11:27 AM
i dunno 40 plus shipping send me an e-mail at [email protected]

haraS14
04-18-2004, 06:22 PM
Which Z brakes are they(alum or iron), what kind of rotors do you have? Let me know what you're willing to part wityh them for.

Frappe
04-19-2004, 09:00 AM
Ditto on what Haras asked, send to Frappe @ Lunaticus.net (remove the spaces)

shinjari
04-19-2004, 10:57 AM
email sent about the brakes

meatman10523
04-19-2004, 12:56 PM
http://www.princeton.edu/~asad/zbrakes/pages/4.htm

by using that site i figured out they are 30mm aluminum, they come with all the pins ect and stock 300zx, used, but never turned rotors drilled 2 both 4 and 5 lug. for the axxis pads, calipers and rotors iam asking 400ish, but its neg. so make me offers.
[email protected]